ct 60 used for sale

cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-20000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1700 NmMain drive 1Drive power (100% DC)40 kWSpeed range- 2 ...

Guild Master CTX 510 Control: Siemens 840 D with Shop - Turn Year of Make: 2004 Travel X / Z: 300 / 1050 mm Revolver: 12-speed Tool holder: VDI 40 Bsbmezmxz Roknrzodf Spindle speed up to: 3,500 rpm Bar passage: 90 mm Quill travel: 150 mm Tailstock Cooling 20 bar Chuck size 315 mm Spindle hours approx: 14,000 Batch sizes from 0 - 5 were produced on the machine Programming was done on the machine

X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool  ...

turning diameter: max. 560 mm turning length: 600 mm control: 840D powerline Siemens greates pass round over bed: 680 mm Swing dia. over traverse guideway: 565 mm centre distance: 620 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 37 kW max. Torque: 390 Nm spindle nose: 170H5 spindle bearing diameter: 120 mm usable bar diameter: 65 mm max. chucking diameter: 250 mm C-Axis: 0,025° / 360 ° Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1 power capacity - Sub spindle: 25 / 33 kW max. Torque: 213 Nm spindle bearing diameter: 90 mm spindle bore: 57 mm spindle nose: 140H5 C-Axis: 0,025° / 360 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 4.500 min -1 power capacity - driven tools: 12,2 kW tool taper: VDI 40 DIN 69880 Tool dimensions with sq ...

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 5600 mm table load: 150 t table diameter: 3000 mm table turning speeds: 1 - 20 U/min table drive: 88 kW total power requirement: kW weight of the machine ca.: 79 t boring mill turntable - Table diameter 3000mm - Top plate up to 5600mm 1x table base Ø4550x1600mm, 28t 1x rotary table (top) Ø5600x730mm, 35t 1x rotary table (inside) Ø3000x300mm, 6t 1x gearbox 1850x1300x1250mm, 9t 1x drive 1600x1250x1600, 1.5t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILDEMEISTER CTX 200 ist eine CNC Drehmaschine mit hoher Präzision, ausgelegt für große Genauigkeit und Zuverlässigkeit. Arbeitsbereiche: Spitzenhöhe 298 mm, Umlaufdurchmesser 440 mm, Drehdurchmesser über Planschlitten 210 mm, Spindelbohrung 56 mm, maximale Drehlänge 305 mm, Verfahrwege Z 350 mm, X 160 mm; Revolver 12 Positionen, 12 angetriebene Werkzeuge. Technische Hauptdaten: Drehzahlen 25–5000 t/min (stufenlos), Spindelleistung 7,5/11 kW, Leistung drehende Werkzeuge 3 kW, Drehmoment 58/84 Nm (Spindel), 5,7 Nm (Werkzeuge), Eilgang X 12 m/min Z 16 m/min, Anschluss 3x380 V 50 Hz, Gewicht ~3200 kg, Abmessungen 2600×1700×1700 mm, Geräuschpegel 77 dB(A), Gesamtleistung 34 kVA. Zubehör: 3-Backenfutter Ø140 mm, Satz weiche Backen, Spannzangenaufnahme und Satz Spannzangen, hydraulischer Reitstock, Zentralschmierung, Drehspitze, RS232-Schnittstelle, Bohrfutter, Fußpedal, Satz We ...

GILDEMEISTER CTX 400 is a CNC Drehmaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Drehdurchmesser über dem Bett 500 mm, Drehdurchmesser 290 mm, Drehlänge max. 640 mm; Längsweg Z 640 mm, Planweg X 212 mm; Revolver 12 feste Werkzeuge; Spindelbohrung 66 mm, Werkzeugaufnahme Ø30 mm (DIN 69880). Technische Daten: 25–5000 U/min (stufenlos), Spindelleistung 22 kW, Drehmoment 420 Nm; Pinolenhub 100 mm (Ø80), Druck 8 kN; Vorschübe bis 8000 mm/min (Z), 4000 mm/min (X); Eilgang X 10 m/min, Z 15 m/min; Anschluss 3x400 V 50 Hz, Gesamtleistungsbedarf 50 kVA; Gewicht ~5100 kg; Abmessungen 3400×1940×1700 mm. Zubehör: Beleuchtung, Kühlmitteleinrichtung, LNS Quick Load Servo 2 Lademagazin, Späneförderer, Satz Werkzeughalter. Erreicht enge Toleranzen; geeignet für Automotive, Luft- und Raumfahrt, Medizintechnik, Uhrmacherei und Maschinenbau. Techn ...

CNC Lathe Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Year of Make: 2005 Control: Siemens 840D ShopTurn Circumferential diameter: 680 Chuck diameter: 250 Drive power: 40/ 100% ED: 37/25 KW Speed range from – to: 20-5000 rpm Weight approx.: 6500 Kg - 12-speed revolver - VDI 40 - C-axis - Y-axis - Powered tools 12 stations - Chip conveyors - Tailstock - SMW Autoblok 250 BH Errors excepted

engine output: 110 kW cubic capacity: 3922 ccm allowable maximum weight: 9,0 T All-wheel drive 4x4 FASSI F 60 loading crane CTS 5038 hook lift / 5 tons Front-mounted winch 2 to AHK tow bar AHK ball head CUMMINS ISBe 150.30 / ISBe 3.9. Common Rail Motor 3922 cm³ 150 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 393 mm control: Siemens 810D total power requirement: kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: CNC Turning Center Model: CTXbeta500V4 Manufacturer: DMGMORI Control: Siemens 840D si Operate solutionsline Year of Make: 2014 Location: EU (#301336) Facilities • Main spindle 34/25 kw rpm 5000 • Hydraulic 3-jaw chuck 250 mm • Manual tool measuring device • 12 VDI 40 station turrets • Tool drive for all stations • C-axis • Y-axis • Scale X • Chip conveyor • 12 bar / coolant system • Coolant spray gun incl. documentation if available Technical data Turning diameter max. approx. 410 mm Turning diameter standard approx. 270 mm Rod diameter max. approx. 65 mm X-axis approx. 300 mm Z-axis approx. 550 mm Y-axis approx. +/- 60 mm Spindle speed 1 approx. 5000 rpm Speed milling pindle approx. 4,000 rpm Rapid traverse X/Y/Z approx. 30/22.5/30 m/min Power spindle 1 approx. 34/25 kW Footprint L x W x H approx. 5.3 x 3.0 x 2.1 m  ...

Machine Type: CNC Turning Center Model: CTXbeta1250 TC Manufacturer: DMGMORI Control: DMG MORI CELOS with Siemens 840D sl Operate Year of Make: 2020 Location: Germany (#301432) Facilities - Turning-milling spindle HSK-A 63 - Tool magazine 80 places - Hinge belt chip conveyor - Main spindle ISM 102 33/40kW - Sub-spindle ISM 76 25/32kW - Counter-pressure stress main spindle and sub-spindle - Milling spindle 20,000rpm - High pressure cooling 80bar - Feed rinsing device, main spindle - Tool probe, BLUM for fixed tools in the turning/milling spindle - Tool probes for workpieces - Automatic door - Oil mist extraction mechanical - Bar machining package 104 mm - Workpiece pick-up device with conveyor belt - Hydraulic hollow clamping device n max 3,600 rpm - Indicator light, 4-colour - Machine Protection (MPC) - Electrical interface standard Profibus for Robo2Go -  ...

Lathe Gildemeister CTX 410 BJ 2004

Lathe Gildemeister CTX 400 BJ 1993

Kompakter und wendiger Elektrostapler mit Ladegerät. Compact and maneuverable electric forklift with charger. Elektro Gabelstapler / Eletric Forklift Clark CTM 16 S Baujahr / Year 1998 - Serial-No. CTM145 2765 GEF 7096 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1600kg Hubhöhe / Lifting high max. 3300mm Lastschwerpunkt / center of gravity 500 mm Eigengewicht / Total weight 3138kgs Mit Ladegerät / with Charger

CNC Turning and Milling Center DMG CTX GAMMA 2000 TC (spindle hours may increase slightly). The machine is equipped with an automatic steady rest from SMW AUTOBLOK, a three-jaw chuck (manufacturer SMW, diameter: 300 mm), additional clamping jaws, another jaw chuck, as well as a chip conveyor and coolant system. Transport warning: Caution: the machine can be transported on a truck up to 3000 mm wide. Additional technical specifications: • Spindle distance: 2260 mm • max. workpiece weight chuck parts/chuck weight: 250/150 kg • max. workpiece center of gravity from spindle flange: 250 mm • Travel path Z2: 1910 mm • Travel path Z3: 1910 mm • Steady rest clamping range DW: 45 - 310 mm • Steady rest width C: 145 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm

consisting of three pieces, holder: VDI 40

The machine is equipped with a tailstock, a three-jaw chuck, a chip conveyor, and a coolant system. Attention: spindle hours may increase slightly! Additional technical specifications: • Nominal voltage: 125 A • Spindle distance: 1020 mm • Max. workpiece weight chuck parts/chuck weight: 100 kg • Max. workpiece center of gravity from spindle flange: 120 mm • Travel X1: from -10 to 490 mm • Travel Y1: +-100 mm • Travel Z2: 600 mm • Travel Z3: 800 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm • Slide rapid traverse speed Z-axis: 40 m/min • Path resolution Z-axis: 0,001 mmm • B-axis max. swivel speed: 70 rpm • Angular resolution: 0,001° • Quill force: 8 kN

turning diameter:570 mm turning length:635 mm travel -x axis:220 mm travel -z axis:635 mm Torque:240 Nm feed::X: 20m/min; T: 24m/min disc turret:12 fach with live tooling:6 fach main spindle speeds::25-25.000 dimensions of the machine ca.:3210 x 1750 x 1750 mm weight of the machine ca.:5.300 t C-axis

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

Height=0.765 m, Overall length= 0.6 m, Overall width= 0.6 m, Net weight= 58 kg,

Drawer printer with possibility of loading up to 4 rolls of 150 m with a maximum width of 42 (106 cm). Print with Pearl Océ Crystal Point toner technology that guarantees valuable results in both CAD and color with a print speed of 30 seconds for A0 size

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

- the classic must press in fruit processing nominal power up to 180 kg/h engine power 1.1 (1.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1078 mm width 800 mm Hoehe 1700 mm Hoehe Acceptance 1 142 mm Basket in 1.4301 / AISI 304 press force 16.1 to Press pressure 320 bar Juice yield up to 65% Connection for juice flow High juice drain 480 mm Hoehe marc ejection 642 mm Scope of delivery 1 press bag 60l, 3 inserts of 38cm, 3 press inserts made of acacia wood ; New machine - best condition

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt -Design: Structured band, KN cross-stud structure, stapled -Width: 600 mm -Length: 5100 mm -Weight: 10 kg

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 600 mm -Length: 2290 mm -Thickness: 2 mm -Transport dimensions: Ø 100 x 600 mm -Weight: 2.6 kg

ABB GT10 / Siemens SGT-600 Gas Turbine Generator for Sale High-Reliability Industrial Gas Turbine Package Available for Immediate Inspection A well-maintained and operational ABB GT10 Gas Turbine, upgraded to Siemens SGT-600, complete with generator package. The unit has a documented maintenance history and remains in healthy operating condition. A. Technical Specifications Item Description Gas Turbine ABB GT10 / Siemens SGT-600 Generator Type GBA 1120LE Capacity 31,875 kVA Voltage 11 kV Fuel Natural Gas Power Output 18–20 MW Steam Production 41–46 Ton/hr Steam Condition 40 bar, 270°C Superheated Steam B. Commissioning Information Item Date Original Commissioning April 1998 Conversion / Upgrade September 2007 C. Major Maintenance History Maintenance Level Operating Hours Equivalent Operating Hours (EOH) Maintenance Date Level B (20,000 EOH) 21,077 22,486 Ju ...

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo + Extraction auger (if needed) available also with hopper+loading screw conveyor, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered RECONDITIONED, price options: as is, checked, lightly reconditioned, totally reconditioned

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

2025 BIG backhoe bucket 60cm with MS01 Symblock attachment, Technical specifications:, - Weight: 80 kg, - Recording width: 60 cm, - Contents: 95 liters, - CAT 2 - suitable for 1.9 - 2.7 t excavators

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

price only for filter frame Plates maximum: 150 Plate formats: 600x600 dimension ca. 310x90x220 cm Distance between first plate and spindle approx.140cm

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

Used SMI SK 600F shrink wrapper 21600 BPHTechnical Specifications & Performance DataThe SMI SK 600 F Shrink Wrapper is an automatic packaging machine designed for high-efficiency bundling with shrink film in beverage production and industrial packaging environments. Manufactured by SMI engineering, this second hand machine delivers reliable performance and versatile pack configurations for PET, glass, and aluminum can containers. Optimized for integration into a used bottling line, it supports applications across water, CSD, milk, oil, beer, wine, and spirits.Manufacturer: SMIModel: SK 600 FYear of construction: 1998Maximum speed: up to 21,600 units/hour (approx. 60 bundles/min with 3×2 of 1.5L)Current format: 1.5L, 3×2 bundleContainer materials: PET, Glass, Aluminum cansPackage type: Shrink film (trayless)Max container height: 380 mmMachine pitch: 545 mmWorking height (table): 1250 mm ...

Stainless steel batch mixer with a gross volume of 600 l. (max. usable filling: approx. 400 l.). Centrifugal unit equipped with ploughshares, drive via motor, starting clutch and intermediate gearbox, outlet flap pneumatically operated. Equipped with 2 flanges for mounting cutter heads/choppers. In very good condition of wear, bead-blasted and repainted.

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

1 used shrink tunnel, made ZVT (now KHS), type ST/II-600DG. Built in 1995. With belt braiding tape (for untabivalent products such as PET bottles). Total length 6,000 mm. Passage 570 mm High x 400 mm wide. E-connection 415V (x5%) / 50 Hz. Top condition (belt recently renewed!). Operator side: right or left. (2 machines available).

We offer from stock zzügl. Packaging+Freight to: Timing belt 113 teeth a 42,-/piece Cylinder head LDW1204/1204T/1404 net 840,-/piece all prices to the tax mail= info@miw-zeven.de

Scania motors type= DC/DI12 pump nozzle with max.406KW at 1,500/1,800 RPM or in the all-speed range available from stock at short notice with warranty. Also CHP use with vegetable oil,palm oil,fryer oil,etc... Promotions! Mail=info@miw-zeven.de

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW