ct 60 used for sale

Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

turning diameter: max. 560 mm turning length: 600 mm control: 840D powerline Siemens greates pass round over bed: 680 mm Swing dia. over traverse guideway: 565 mm centre distance: 620 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 37 kW max. Torque: 390 Nm spindle nose: 170H5 spindle bearing diameter: 120 mm usable bar diameter: 65 mm max. chucking diameter: 250 mm C-Axis: 0,025° / 360 ° Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1 power capacity - Sub spindle: 25 / 33 kW max. Torque: 213 Nm spindle bearing diameter: 90 mm spindle bore: 57 mm spindle nose: 140H5 C-Axis: 0,025° / 360 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 4.500 min -1 power capacity - driven tools: 12,2 kW tool taper: VDI 40 DIN 69880 Tool dimensions with sq ...

Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible.

Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible.

Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible.

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

sweeping width: 942 mm working width: Bodendüse: 700 mm tank: Reinigung: 79 l tank: Schmutzwasser: 83 l weight of the machine ca.: 145 kg dimensions of the machine ca.: 1,32 x 0,7 x 1,1 m - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfect ...

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction 2019 Control Celos with Siemens 840D sl Operate including 21.5 ERGOline Control Travel X-axis: 490 mm Y-axis: 250 mm Z-axis: 1,300 mm B-axis: +120° to -120° Max. turning diameter 500 mm Max. turning length 1,200 mm Main spindle ISM102 Drive power: 37/28 kW Max. torque: 700/800 Nm Max. spindle speed: 4,000 rpm Max. bar passage: 104 mm Sub-spindle ISM52 Drive power: 14.5 kW Max. spindle speed: 6,000 rpm Milling spindle Drive power: 22 kW Max. spindle speed 12,000 rpm HSK-63A DIN69893 Tool magazine 80 tool positions Other equipment Interface for robots Glass scales in X, Y and Z axes MP 1.0 – Machine Protection Control Tool probes Workpiece probe, BLUM TC60 Sorting the tools in the magazine Technology cycle for the application of an alternating speed for vibration-critical voltages Chuck rinsing device on the ...

This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 2 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. -Specifications: number of feeding tracks: 2 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions: LxWxH customized. The image shows the 8-line version. Please note that our new prices are often below the u ...

This machine is suitable for counting of candies, biscuits, nuts, small vegetables such as peas, beans, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. - Specifications: number of feeding tracks: 1 | capacity: max. 1200 pcs/min (subject to the size and shape of the products and accuracy requirements) | product sizes: min. ? 1mm, max. ? 30mm | accuracy = 99,9% (subject to the type of products and counting speed) | large infeed hopper | compressed air: 6bar | power: 220V, 0.5kW | machine dimensions: L900xW400xH800mm, weight: 70kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from a ...

This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 4 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 4 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions: LxWxH customized. The image shows the 8-line version. That machine/system is available in different versio ...

This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 8 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 8 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions LxWxH: customized | weight: approx. 550kg. That machine/system is available in different versions for diffe ...

Small compact desktop counting machine, stainless steel (SS304) version. Counting 1-100 pcs into bottles, cans, etc. Operation through elektromagnetic vibration: tablets are falling into the counting plate which then turns and release the required number of tablets to the outfeed into the bottle or other container. By changing the counting plates the size and number of tablets can be changed. Low noise and easy operation. - Specification: Speed: max. 20 fillings/min | 220V, 180W | machine dimensions: L600xW500xH700mm | weight: 50kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machin ...

This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 8 tunnels vibration feeding device ensures an evenly feeding and no breakage of product. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of vibrating tracks: 8 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 5.5mm, max. ? 38.5mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | all the parts in contact with the product are made of Stainless Steel 316, other made of Stainless Steel 304 | mac ...

The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels with 99,9% accuracy. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle. Easy to operate touchscreen, stainless steel version (SS304). - Specifications: error rate: < 0.1% | number of vibrating tracks: 16 | capacity: max. 5200 pcs/min | counting range: 15-9999 pcs | product sizes: min. ? 3mm, max. ? 22mm | container: ?(25-75)xH(0-240)mm | infeed hopper volume: 38l | compressed air: 0.15m?/6ba ...

Counting unit for products with a minimum diameter of 5mm. - Specifications: counting from 1 to 9.999 pcs | with a speed of: 1.200 pcs/min | stainless steel version | machine dimensions: L770xW660xH700mm | weight: 70kg | 220V, 0.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Small and compact desktop counting machine for counting tablets/pills with regular or irregular shape, capsules and solid granules in the sense of tablets similar products such as candies. Also suitable for gel and gelatin capsules: After receiving samples, we can check and, if necessary, confirm the ability to run. Filling into bottles, cans, jars. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 4 tracks vibration feeding device ensures evenly feeding and no breakage of product. The structure and design of the hopper prevents jamming of the products. Control via touch screen interface, menu in English available. - Specifications: Number of vibrating tracks: 4 | capacity: max. 30 fillings/minute, depending on product, shape and quantity of the product | working range: adjustable from 2-9999 per container ...

The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle (number of nozzles customizable for surcharge). Easy to operate touchscreen. - Specifications: product sizes: min. ? 3mm, max. ? 15mm | number of vibrating tracks: 16 | vibrating levels: 2 | capacity for tablet example ? 8mm: max. 3000 pcs/min | counting range: 1-9999 pcs | suitable bottles: 10-500ml, round or square | power: 220V,1.2kW | ma ...

SPECIFICATIONS: Power supply: Lithium battery Water tank: 30 l Width of the washing lane: 450 mm Speed: max. 3.5 km/h Dimensions: 96 x 55 x 122 cm Weight: 98 kg

Key data: 210 mm, 305 mm, 5000 1/min

CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation

Beam cutting center STROMAB CT800 Beam cutting center with large cross-sections, making it an optimal solution for carpentry and frame construction. Thanks to its electronically controlled 5-axis technology, it meets all requirements for straight, tilt and complex cutting. It guarantees maximum processing speed and finished product quality, reducing labor and maximizing production. The CT800 can process beams of any length and cross-sections from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilted upper hold-downs Specification:. Motor Power: 18 kw TCT Disc: 800mm Number of electronically controlled axes: 4 Table saw rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Dial angle: 90° ÷ 45° Positioning Speed: 0 ÷ 17 mt./min Cutting range: . At 90° with single stroke: mm. 280×290 / 250×390 / 200×450 At 90 ...

Elektro Gabelstapler / Eletric Forklift Clark CTM 16 S Baujahr / Year 1998 - Serial-No. CTM145 2765 GEF 7096 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1600kg Hubhöhe / Lifting high max. 3300mm Lastschwerpunkt / center of gravity 500 mm Eigengewicht / Total weight 3138kgs Mit Ladegerät / with Charger

A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in  ...

CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools

DMG MORI CTX Beta 2000 CNC turning center was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarantees the achievement of high repeatability of the manufactured parts. Thanks to additional function packages, it is possible to perform, e.g. precise gear milling or polygon turning. All machining processes are performed inside a large working area by means of a reliable spindle and cutting tools taken from a 12-position turret. The tailstock coupled to the Z-axis moves collision-free on separate sliding guides, mounted on a bed of high thermal stability. This bed is excellent at reducing the influence of heat, while increasing the life of all components and tools. Over its service life, the machine has worked for a total of 6219 hours. ...

Key data: 465 mm, 1050 mm, 3500 1/min

Specifications: Manufacturer: Gildemeister Type: CTX 510 Year of Make: 2006 Control: Siemens 840D ShopTurn Travel distances: X 300 mm, Z 1,050 mm Working spindle Speed: 3,500 rpm Spindle bore: 95 mm Rotary diameter: 465 mm Deh length: 1,050 mm Tool/movement Tool turret: 12-speed Tool holder: VDI 40 Circumferential diameter: 680 mm Dimensions and weight Weight: 7,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tailstock Conveyor automatic door Three-jaw chuck 315

control: SIEMENS 840D SL ShopTurn turning diameter: 700 mm swing over bed: 900 mm turning length: 3065 mm c-axis: indexing: 0.001 ° turning speeds: -2500 U/min tool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mm rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 30 m/min Overall size: 4450x2100x2350 mm rapid traverse Z-axis: m/min weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine ...

Height=1.56 m, Overall length= 0.86 m, Overall width= 2.16 m, Net weight= 250 kg,

Specifications: Workspace: Max. circumferential diameter: 680 mm Circumferential diameter via X-guide: 565 mm Chuck diameter: 250 / 315 mm Plane stroke (X): 315 mm Longitudinal stroke (Y): 1350 mm Spindle box: Spindle diameter in the front bearing: 150 mm Spindle bore: 107 mm Main Drive: Power of the three-phase main drive: 36 / 45 kW Torque (100% ED / 40% ED): 600 / 750 Nm Speed range (100% ED): 20 - 3200 rpm Speed range (40% ED): 20 - 4000 rpm Tool carrier: Number of tool stations: 12 Cylindrical shank diameter: 50 mm Switching time 30°: 0.16 sec. Tailstock: Tailstock, travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill holder: MK 5 Coolant Facility: Content: approx. 220 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, ...

DÖRRIES CTE 300 -5100 V6 - CNC CAROUSEL LATHE Year of construction : 1980 Electrical and electronic overhaul : 2002 Chuck diameter : 3,000 mm Max. swivel range : 6,000 mm Max. turning height : 2,700 mm Max. table load : 50 T Travel: X-axis : 2,550 mm Z-axis : 1,250 mm Y-axis : 5,054 mm (table) With C-axis Column travel : 1,250 mm Control Siemens : Siemens 840C Angle milling head

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

CNC Lathe Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT Circumferential diameter over bed: 680 mm Circumferential diameter over face slide: 565 mm Plan travel: 260 mm Longitudinal travel: 635 mm Drive power: 40/ 100% 25/37 kW Speed range from – to: 20 – 5000 rpm Weight approx.: 6500 Kg Equipment: Driven tools: 12 stations Tool carrier: 12-cavity Sauter revolver VDI 30 Partial hollow clamps Tailstock Quill stroke automatic Quill holder: Mk 5 Conveyor Measuring arm Oil mist extraction Errors excepted

Key data: 680 mm, 1300 mm, 4000 1/min

Year of construction 2003 Spindle Hours 11600 Siemens Control 810D max. circulation 680 mm Circulation via X-guide 565 mm Longitudinal travel 1300 mm Planweg mm 315 Spindle head h5 Spindle diameter in front bearing 150 mm Spindle bore 107 mm Chuck diameter 315 mm max. torque 600 Nm Spindle speed 4000 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Tool carrier for 12 tools Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Dimensions of the machine with chip conveyor L/W/H 570/2600/2210 mm Machine weight approx. 10000 kg Accessories: Bezel clamping range 30-245 mm Conveyor Lathe chuck

CNC lathe Type: CTX 510 Ecoline Manufacturer: DMG Year: 2011 Control: Siemens Sinumerik 810D Max turning diameter: 465 mm Max swing over bed: 680 mm Max swing over support: 465 mm X: 300 mm Z: 1050 mm 315 mm 3-jaw hydraulic chuck Max spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% DC): 33/22 kW Max spindle torque (40%/100% DC): 33.5%: 630/420 Nm Maximum rotation speed of driven tools: 4000 rpm Programmable tailstock Tool probe Chip conveyor Suction Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions: 5250 x 2300 x 2000 mm Machine weight: 8000 kg In good condition, under power After repairing the linear line Accessories: Both external and internal tool holders Driven tool holders – direct and lateral Drill holders Hard jaws - 1 set Soft jaws - approx. 10 sets Find more here - / Contact us at -

Colortronic CTT 30 Granulate Dryer For climate- and air-independent drying of thermoplastic granules and regrind before processing in order to remove the remaining moisture from the inside and outside of the granules. Colortronic dry air dryers work according to the absorption principle. The air is not heated, but the moisture in the drying funnel is absorbed and extracted. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 More items - new and used - can be found in our shop! International shipping costs on request!

turning diameter: 500 mm turning length: 800 mm control: Siemens 840D greates pass round over bed: 700 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 34 kW max. Torque: 380 Nm C-Axis: 0,01 ° max. chucking diameter: 320 mm milling spindle: milling spindle motor: 22,5 milling head speed: 12000 U/min b-axis: +/- 110 ° tail stock: axis stroke:: x-axis: 480 mm y-axis: +/- 100 mm z-axis: 845 mm feeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/min feed power: 5,6 / 5,6 / 7,4 kN switching time: 30°: 0,4 sec turret:: number of toolpositions: 24 pos. tool taper: HSK A 63 total power requirement: - kW weight of the machine ca.: 10 t NC - turning and milling center - CNC control Siemens 840D Ergo Pro - Milling head with B-axis - Y axis - Coolant system (through Spindle) 15bar with paper band filter - chip conveyor - Tailstoc ...

Fritsch Croissant Line Type: CTR Calibration head type: KK-88-700-R Year of construction 2002 CTR Punching - Turning Station Type: CTR700/30-L Year of manufacture 2007 with a total of 5 punches 1x 3 rows / small croissants 1x 3 rows / large croissants 1x 4 rows / medium croissants 1x 4 rows / large croissants 1x 6 rows / long croissants (See pictures) Wrapper for stuffed croissants: Type: FRH 400-L Year of manufacture 2007 Wraps for unfilled croissants: Type: CRH-120-400-L Year of Make: 2005 Total dimensions of the system: Height: 160cm Width: 570cm Depth: 130cm

GILDEMEISTER CTX 400E CNC turning center was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine, designed for machining workpieces with a maximum diameter of 570 mm, is distinguished by its high precision and reliability. The large working area is equipped with a 12-position turret and a spindle, whose high-powered motor allows all modern cutting tools to be fully utilised. The CTX 400E CNC lathe weighs approximately 5300 kg. Technical specifications of the GILDEMEISTER CTX 400E metal lathe - maximum turning diameter: 440 mm - maximum turning diameter over bed: 570 mm - maximum turning diameter over slide: 420 mm - maximum turning length: 635 mm - distance between centers: 700 mm - feed in the X/Z axis: 220/635 mm - maximum spindle rotational speed: 5000 rpm - spindle bore diameter: 79 mm - spindle drive power: 21 kW - 12-position turret - number of ro ...

Manufacturer: Festool Model: CTM 48 E LE EC/B22 Type: Industrial Vacuum Cleaner / Dust Extractor Tank volume: 48 litres Filter class: M Power: 1200 W Power supply: 230 V Condition: used Location: Bremen

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Fritsch Condition: RENOVATED Made in Germany Description: This Fritsch Line includes: Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year

turning diameter: 200 mm turning length: - mm control: DMG total power requirement: kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 246 mm turning length: 445 mm control: Fanuc 32 total power requirement: kW weight of the machine ca.: 4250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 5600 mm table load: 150 t table diameter: 3000 mm table turning speeds: 1 - 20 U/min table drive: 88 kW total power requirement: kW weight of the machine ca.: 79 t boring mill turntable - Table diameter 3000mm - Top plate up to 5600mm 1x table base Ø4550x1600mm, 28t 1x rotary table (top) Ø5600x730mm, 35t 1x rotary table (inside) Ø3000x300mm, 6t 1x gearbox 1850x1300x1250mm, 9t 1x drive 1600x1250x1600, 1.5t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU354T960 LocationBarneveld MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information Total height1,9 m Weight400 kg CEcheck Floorspace0,85x1,7 m Extra SpecificationsTemp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What ...

General SKU297N382 LocationBarneveld MakeCetetherm AE TypeCeteplate CT240-MP8/113 No.30103-15577 Year of construction2000 Pressure Working pressure5 Bar Main Features MaterialStainless steel Size length1500 mm Sizes width500 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Capacity169 l Plate sizes1500 x 500 mm Connectionsø 125 mm Max. temperature100°C. Information Total height1,9 m Weight650 kg Floorspace1,5 x 0,7 m Technical specs Extra informationindicated size is platen sizePlate heat exchangersCetethermHeat exchangers > Plate heat exchangersBrand > Cetetherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...