ct 60 used for sale

grinding range: 600 x 300 x 400 mm magnetic plate size: 600 x 300 mm distance spindle center to table: 5500 mm max. table load: 250 kg grinding wheel speeds: 1.900 U/min longitudinal feed: 680 mm cross travel: 245 mm Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a robust 3-wheel electric forklift from the premium manufacturer Hyster. The device is manoeuvrable, compact in design and is ideal for use in halls or confined spaces. Note: The truck is sold without a battery (battery compartment is empty). Technical data (according to nameplate): Manufacturer: Hyster Model: J1.60XMT Year of Make: 2001 Serial Number: G160A04739Y Drive: Electric (48 volts) Load capacity: max. 1,460 kg (at 500 mm LSP) / 1,320 kg (at 600 mm LSP) Lifting height: 3,270 mm Net weight (without battery): 2,300 kg Required battery weight: Min. 810 kg / Max. 900 kg Equipment & Features: Attachments: Hyster sideshift + 1,200 mm forks Chassis: 3-wheel version with double steering wheel at the rear for minimum turning circle Tyres: Superelastik / Solid rubber (Front: 18x7-8 Solid | Rear: 15x4.5-8 Dual Solid) Driver's seat: Tilting comfort seat with seat  ...

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

Used ISERNHÄGER Sourdough Line ASB 600 RM - 3pcs available - Capacity 600 litres Visits and test runs are possible by arrangement.

Kannegiesser belt conveyor GF 6000-880-800 RA2299 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 6000 mm Belt width (GB): 800 mm Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6000 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Nord KW: , 0,75/S1 Ampere: 0,9 Conveyor speed m / s: -0,95 - 0,95 scope of delivery: without supports and side guides Für eine i ...

Second-hand DHB wood chippers, Type 600, for the professional chipping of wood and other materials. The machine is fitted with a 20 mm screen, an 18.5 kW motor and a 600 mm-long rotor. Technical data: Screen: 20 mm Motor: 18.5 kW Rotor length: 600 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

Pressing force max KN 600 Withdrawal force max KN 300 Die Supporting force max KN 300 Die return force max KN 32 Upper punch travel mm 190 Upper punch adj.travel mm 200 Filling height max mm 180 Pressing travel max. mm 90 Withdraw travel max. mm 95 Top pressing travel max mm 18 Adjustment at Die position mm 50 Filler travel mm 140 Maximum forming Diameter mm 130 Cycle stroke /min 12-25 Main Motor Power KW 15 Total Power KW 15 Speed control method Inverter Driving pressure for Clutch MPa 0.55 Pre-load Travel mm 110 Total air consumption L/min 300 Total weight Kg 5800 Overall size H mm 3200 W mm 1750 D mm 1480

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-600 grams Machine weight: 65 kg

roller conveyor 2200-640-600 RA2292 Make: Blume Roller width (RB): 600 mm Nominal/outer width (NB): 640 mm Length: 2200 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Optimizing Cross-Cut Saw manufactured in 2021. This OPTIMA 60SNC 6200 CE features a maximum workpiece height of 110 mm and a width of 300 mm, with an impressive infeed length of 6,200 mm. It offers a feeding speed of 60 m/min and a saw blade diameter of 450 mm. If you are looking to get high-quality cutting capabilities, consider the OPTIMA 60SNC 6200 CE machine we have for sale. Contact us for further details.

An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible.

Key data: 90 KW, 1485 1/min

TECHNICAL SPECIFICATIONS Manufacturer: ELEKTRA Elektromotoren Dillingen Description: Electric drive motor Type: IEC squirrel cage motor (EN 60034) Power: 90 kW Speed: 1485 1/min Frequency: 50 Hz Standard voltage: 400 V Design: IM B3 Degree of protection: IP 55 Weight: 580 kg SPECIFIC COMMENT - Incl. 1 flywheel extra

Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 A Serial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Falzeinbrennmaschine - Joint-setting machine Karl Tränklein FEM 608-53-6 Serial-No. 608-53-6 Working with 500 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

- Only 250 Spindle Hours  - ATC 48 Position - Optional Lehmann EA-520 R-Mi4 4e axis integrated - Optional Lehman Tailstock  - Grundfos IKZ 20 Bar - Renishaw 3D Tool probe - Renishaw Length probe  - Optional tooling package ca 30 units - Optional SCHUNK KONTEC KSG Machine vice (4 units) - New EUR 200.000

Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600 Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details.

This 4-axis Okuma MA-600HB was manufactured in 2007. It features a maximum spindle speed of 6000 RPM and a robust tool capacity of 150 tools in the automatic tool changer. The machine is equipped with a 30 bar coolant system and includes advanced features such as tool breakage control and DNC DT. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details.

Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, its ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine.

This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details.

GKM Siebtechnik KTS-V 600/1 – Vibratory tumbler screening machine (YOC 02/2021) Professional vibratory tumbler screening machine from GKM Siebtechnik (Waibstadt). Type: KTS-V 600/1 Serial Number: 3794 Year of construction: February 2021 Technical features: • Size 600 (sieve diameter approx. 670 mm) • 1-deck design • High-frequency, three-dimensional screening movement • High acceleration (suitable for dry and wet screening) • Modular, self-centering design • Parts in contact with the product in stainless steel • Maintenance-free vibration motor • CE and EAC compliant • Manufacturer: GKM Siebtechnik GmbH, Felix-Wankel-Str. 11, 74915 Waibstadt The machine is used, but fully functional and ready for use. Ideal for classification, fractionation and dedusting of dry and moist bulk materials in the food, pharmaceutical, chemical, plastics, minerals  ...

Bang & Co SAP 603 strapping machine – built in 2016 – fully functional + 2 rolls of tape Sell a used, fully functional Bang & Co strapping machine model SAP 603. Nameplate): • Model: SAP 603 • Machine No.: 15015642 106 • Year of construction: 2016 • Power connection: 230 V / 50 Hz • Manufacturer: Bang & Co GmbH, Oberursel • CE marking available Condition & Scope of Delivery: • Fully functional and ready to use • Good used condition • Also included: 2 rolls of strapping Ideal for commercial use for secure strapping of cartons, parcels and packages. Sale: • Delivery possible • Pick-up available If you are interested, please contact us - more photos/videos or a demonstration on site are possible.

Kannegiesser belt conveyor belt conveyor GF 3500- 680- 600 RA2323 Technical data: Conveyor length (NL): 3500 mm stand width (NB): approx. 680 mm belt width (GuB): 600 mm Overall height(BH): 110 mm Conveyor speed (v m/s): 0,9 at 50Hz, adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0.37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 01/2018 Optionally available: Suppors Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2018 condition: as good as new (used) Conveying length in mm: 3500 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Bauer Getriebemotor KW: 0,37/S1 Conveyor speed m / s: freely adjustable scope of deliver ...

roller curve right or left tight division 90°/190°-660-600 IR500 RA2314 Make: Running direction: 90° right running/ left running Roller width (RB): 600 mm conical, plastic coating Nominal/outer width (NB): 660 mm Center roller axle distance: 60mm, 3mm roller distance Inner radius (IR): 500 mm Overall height frame: 120 mm Height including motor: 400 mm Motor MOVI-Mot 3x300-500V 0,25kW 1400 u/min max Brake 220-240V Gear motor: SEW Conveyor speed: 0.6 m/s 2 90° curves can be screwed together to 180° Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 660 Roll width in mm: 600 angle: 90° Driven: YES scope ...

Manufacturer GURUTZPE Model A-1200 4G CNC x 6000 Year 2008 CNC FAGOR 8055 TC Capabilities and advances Center height 600 mm. Distance between points 6,000 mm. Cross carriage travel 530 mm. No. of support guides 4 Maximum turning on bed 1,200 mm. Maximum turning on carriage 1,000 mm. Fast Forward X/Z Axes 10 m/min Head Head revolutions 20-1,600 rpm No. of Automatic Head Ranges 2 Main Motor Power 42 kW Head Bar Pitch 150 mm. Turret DUPLOMATIC turret type Turret Positions 8 VDI-50 Tool Size Counterpoint Tailstock shaft diameter 180 mm. Additional equipment C-axis + motorized tools INCLUDED 4 independent jaws plate Ø 800 mm INCLUDED Bezel with 3 supports Ø 50 – 500 mm. INCLUDED Bezel 3 supports Ø 50 – 520 mm. INCLUDED Bezel 3 supports Ø 480 – 930 mm. INCLUDED MORARI Self-Centering Hydraulic Window Capacity 50 – 315 mm INCLUDED MORARI Self ...

This 3-axis PERTICI 600TSE Circular Metal Saw was manufactured in 2022. It features a cutting length of 5100 mm and a saw blade diameter of 600 mm. The machine is equipped with a hydropneumatic feed mechanism and a double-cylinder clamping system for enhanced precision. If you are looking to get high-quality cutting capabilities, consider the PERTICI 600TSE machine we have for sale. Contact us for further details.

CNC milling machine Maho MH 600 S (4-axis) – Year of manufacture 1993 – Hobbyist / Retrofit / Spare parts Description: Sell a 4-axis CNC tool milling machine Maho MH 600 S from 1993. The machine worked perfectly until the end, but currently has an electronic error and does not start. The mechanics are complete and offer an excellent basis for conversion to a modern control system (retrofit such as LinuxCNC, EdingCNC etc.) or as a spare parts donor. Technical data: Maker / Model: Maho MH 600 S Year of Make: 1993 Travel (X / Y / Z): 600 x 500 x 400 mm Axes: 4 axes (incl. NC rotary table) Operating hours: 52,858 h Spindle/Head: Swivel Vertical Head Equipment & installed components: NC rotary table (4th axis) with clamped machine vice Control / Rack: Philips CNC (NC 9418 830 02871) Drive technology: Indramat AC servo amplifier & KDV/KVR powe ...

Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg

Transnorm curved belt conveyor left bend 180°-700-600 IR750 RA2329 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 700 mm belt width (GB): 600 mm innerradius (IR): 750 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71M4/TH Electrical Data: 380-500 V, 0,55 kW Conveying speed: please contact us Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 600 angle: 180° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s:  ...

A nice Koppens spiral freezer. Model SVR600/20-50-82 with a product capacity of maximum 2.000 kg/h. In/outfeed configuration is North/South. Infeed height = 860mm, outfeed height = 2940mm. Belt rotation is Clock Wise, belt width gross = 660mm, belt width net = 585mm, max product height = 45mm, numbers of tiers = 20 tiers. Belt mesh width = 6mm. This Koppens spiral freezer has been well maintained and is in good condition. The freezer is executed with a S.S. control box(with Danfoss inverter), three/six ventilators, Hot-gas defrost. Drawings and further technical details see Technical Data PDF. We can deliver this spiral freezer with a complete ammonia pump circulation system with 115 kW cooling capacity at -35/+40°C (product number M24-6….). This would be enough capacity for 1.000 kg/h of product. (three fan configuration). Visit also our website: used-refrigeration

Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...

Connected load 380V 2.2kW Cutting height 300 mm Cutting width 570 mm Suction 120 mm Band saw guide at the top and bottom Attack Total height of the machine approx. 2100 mm

Technical data press: Manufacturer Paal (Kadant Paal) Type Konti 600 Year of construction 2008 Total operating hours: 23,020 hours Effective operating hours 1st pump: 10,719 hours, as of August 2026 Effective operating hours 2nd pump: 10718 hours, as of August 2026 Effective operating hours 3rd pump: 9,766 hours, as of August 2026 Number of bales pressed 183,075 bales, as of August 2026 Press force main press 158 t Specific pressing force 12.83 N/cm² Filling volume 3.45 m³ Theor. Throughput capacity approx. 1,266 m³/h Throughput under operating conditions approx. 805 m³/h Bale dimensions 1,100 x 1,100 mm, length variable Drive power 2 x 75 kW Total connected load, 135 kW Bonding 5-fold vertical, fully automatic throughput capacities with a Bulk density of 35 kg/cbm approx. 28.2 t//h Bulk density of 60 kg/cbm approx. 45.6 t/h Bulk density of 100 kg/cbm approx.  ...

Linear rail with folding cam Height-adjustable for mounting on hole punches

Messing Magnetventil / Brass solenoid valve Staiger 601 001 347 MA 222-040 P Brass solenoid valve Staiger 601 001 347 MA 222-040 P

Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details.

Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible.

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: Round wire link belt stainless steel -Width: 600 mm -Length: 6.7 m -Transport dimensions: Ø 320 x 600 mm -Weight: 42.7 kg

Automation system manufactured in 2017. This CLEANLASER CL 600 features a laser wavelength of 1064 nm. With 3 units available, this system is designed for precision applications. If you are looking to get high-quality automation capabilities, consider the CLEANLASER CL 600 machine we have for sale. Contact us for further details.

Two Optitek mould carriers with a control unit in the middle are offered. Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement.

Muthmann / Röntgenwerk Bochum Generator Editor MP 600 with Control Panel Built in 1993 Condition: used, removed from functional system (Siemens Multix CPH) • Before taking over, all devices or systems have been tested on site for their functionality. • The generator is located in our warehouse in Freiberg / Germany. • You buy the generator in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are so ...

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled DIN EN 60974 -Length: 6.5 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.1 kg

This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details.