ct 60 used for sale

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm -Through hole: Ø 136 mm -Hole circle: Ø 170 mm -Weight: 111 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 600 mm -Piston rod: Ø 22 mm / M16 -Dimensions: 800/75 / H70 mm -Weight: 11 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000) ? Cutting head quick-change device ? Positioning laser diode ? Automatic focus setting AutoLas Plus ? Laser power control ? Oil spray ...

electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: IDM 100/30.6013/2 -Power: 40 W -Speed: 1380 rpm -Shaft: Ø 9 x 8 mm -Design: B5 -Protection class: IP 22 -Dimensions: 165/135/H160 mm -Weight: 4 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 1800 watts -Voltage: 220 V -Max. Cutting capacity: 4.5 mm -Dimensions: 570/220/H250 mm -Weight: 10.5 kg

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 605 x 6 mm -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 t -Weight: 9 kg

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Depositor Belmixing-Bowl-Lift 600 - Exhibition machine, year of construction 2022, brand new condition - Depositing range 50 - 600 ml Capacity up to 30 doses per minute Depositing range and output infinitely adjustable Machine mobile, with two locks Machine completely stainless steel Machine height pneumatically adjustable Piston rod with plastic butterfly valve for semi-liquid and flowable products with particles up to D = 25 mm Direct dosing from bowls or other containers Turn-over system for easy removal of bowls Pneumatic hand gun with hose L = 1,650 mm Vertical nozzle D = 25 mm Other accessories on request

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

4000 x 2000mm 6000w with auto pallet changer

Clamping angle, clamping aid -Clamping angle: for clamping aid workpiece clamping -Dimensions: 600/380/H500 mm -Wall thickness: 25 mm -Bores below: Ø 11, on the side: Ø 13/180 mm -Weight: 107 kg

Echea A-II-6000 lathe. Distance between centers: 6.000mm. Swing: 820mm. Swing in carriage: 600mm. Swing in gap: 1.140mm. Bed widht: 510mm. Spindle: 82mm. Speeds: 12. (12-850rpm). Motor power: 25cv. Max. weight with 1 steady rest: 7.700Kg. Equipped with chuck and 2 steady rest. Weight: 9.600Kg.

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 14 mm -Height: 55 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

-Stainless steel tin trolley for Miwe Rollin 60x60 rotary oven -with 18 editions -optionally with sheets

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension Telescopic slides, extension slides, heavy-duty extension -Retracted length: 600 mm -Extended length: 1100 mm -Width: 14 mm / Height: 24 mm -Price: per pair (left right) -Number: 4 pairs available -Weight: 1.5 kg/piece

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 1400 mm - Width : 3100 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Skin pass machine Biscuit machine Krumbein DSM 600 LIV - Skin pass machine Dropin - 600cm bandwidth - Year of construction 2005 - mobile on wheels

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Type: ACS60100163S00C1200901 -Input: 380-415 V 48/63 Hz -Output: 0...300 Hz -Price: per piece -Number: 2 pieces -Dimensions: 255/285/H420 mm -Weight: 18 kg

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x chipboard second choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 7,500 mm Number of fields per row of shelves: 03 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 04x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 12x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 06x chipboard II choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Su ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet racking trusses, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 08x locking pins, used Execution: compl. galvanized For securing the longit ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 192/27/H27 mm -Weight: 0.15 kg/piece

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 9,975 mm Number of fields per row of shelves: 04 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 05x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 16x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 32x locking pins, used Execution: compl. galvanized For securing the longitud ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 202/27/H27 mm -Weight: 0.25 kg/piece

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 5,025 mm Number of fields per row of shelves: 02 pcs. á 2,400 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 03x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 16x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse Agraffe: 5 HK (hook) clear width: 2,400 mm 08x chipboard second choice, used Thickness: 22 mm  ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 08x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse Agraffe: 5 HK (hook) clear width: 2,400 mm 04x chipboard II choice, used Thickness: 22 mm Dim ...

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece

Clamping angle, clamping aid -Clamping angle for: workpiece clamping -Dimensions: 705/605/H710 mm -Wall thickness: 45 mm -Weight: 303 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 600 mm -Dimensions: 600/21/21 mm -Weight: 1.4 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 608/353 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 5.4 kg

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Martonair Type: M/60250B/250 -Stroke travel: 250 mm -Piston rod: Ø 10 mm (Connection: M10 x 1.5) -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 33/345 mm -Weight: 0.55 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-40-600 PPV-A -Piston: Ø 40 mm -Stroke: 600 mm -Max. Pressure: 10 bar -Price: per piece -Number: 4 pieces -Dimensions: Ø 46 x 800 mm -Weight: 2.15 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 1600/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 587 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 115/115/880 mm -Weight: 13.6 kg

Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new (second choice) Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse for panel thickness: 22 mm Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting