cs used for sale

- Content: 68 + 7 HL - With vibrating spout - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Hopper height : 1440 mm

Radial drill CSEPEL RFH 100/3000 without cubes

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

MECOF CS 88 G CUTTER - INSTALLATION YEAR 1990 - SELCA 4045 D steering unit - remote handwheel - x-axis stroke 6300 - Y-axis stroke 950 - Z-axis stroke 1800 - table 8000 x 1000 -n 2° screwed cubes 1500x1000 - spindle motor power 18 Kw - spindle speed 10-1600 with 2 ranges - spindle attachment ISO 50 DIN 2080 - indexed front platform rotation 1 degree - supplied with manual bi-rotary head ISO 50 DIN 2080 connection - fence with gates equipped with microswitch only on 2 sides

charge load: - Cleansing load time: - internal dimension: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CECCATO CSM 5.5 X mini screw compressor Power 4kw Working pressure 10bar Capacity approx. 470l/min Noise level 62dB Dedicated dehumidifier Air tank 270l

50x Zebra Symbol CS4070 Wireless Handheld Scanner – Used - : Price per piece ex location: only 165.-€ (net)! Ev. If you are interested, suitable chargers are also available for sale (for an extra charge)! Manufacturer: Zebra Type: Symbol CS4070 Price incl. 1 battery (others may be subject to an extra charge) Year of manufacture: unknown Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony

Inv. Num. : 8093 Type: RX170HP CS7 Producer: Stäubli Created: 1996 Parameters: Maximum arm reach: 1835 mm Number of axles: 6 pieces Maximum load capacity: 65 kg Accessories: A stand for positioning the robot Cable harness Manual Programmer RoboDK Offline Programming Software Spare parts for CS7

4x CSW8593-125Y-40P screw compressors, two of which served as replacements, so NEW and not yet in use.

Lifting capacity: 2000 kg fork length: 1150 mm Weight: ca. 300 kg fork measurements: 120 x 40 mm adjustable: 280 - 1000 mm tool adaptor: FEM 2 A Fork positioner Full sideshift” to the left and right Fork adjustment for narrow and wide pallets Adjustment within the frame width 3 devices in stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power requirement: 37 + 55 kW Pressure power: 8 bar EXW 92536 Pfreimd - loaded free on truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Food Tools CS4AAC round cake slicer Serial: 5253 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches (doypacks) with regular and irregular shape and a corner spout. Suitable for middle-sized stand-up bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-260)xW(110-180)mm | filling capacity: max. 1200ml | max. speed of the  ...

Food Tools CS1000CE Automatic round cake cutter Serial; 3190 This cake slicer is capable of cutting a variety of frozen round products including cheesecakes, layer cakes, ice cream cakes, pies and more. The machine is best for bakeries producing 200 or more products per hour

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a corner spout. Suitable for extra-large pre-made bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-400)xW(100-280)mm | filling capacity: max. 3000ml | max. speed of the machine in ne ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches (doypacks) with regular and irregular shape and a corner spout. Suitable for small stand-up bags. Integration of liquid and paste dosing units possible. Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-250)xW(11-140)mm |  ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches (doypacks) with regular and irregular shape and a corner spout. Suitable for big stand-up bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-320)xW(100-240)mm | filling capacity: max. 2000ml | max. speed of the machine i ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a corner spout. Suitable for extra-large pre-made bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-320)xW(100-240)mm | filling capacity: max. 2000ml | max. speed of the machine in ne ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a corner spout. Suitable for big pre-made bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-310)xW(110-210)mm | filling capacity: max. 1600ml | max. speed of the machine in neutral: 5 ...

Cintex CS4000 Metal detector checkweigher Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck With jacketcheck General Year of construction1995 Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX designedcheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck MaterialStainless steel With jacketcheck General Year of construction1996 Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU335X731 LocationBarneveld CEcheck MakeGEA Westfalia AG TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW 400/690 V 1460 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDN40 Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L) With jacketcheck General No.1722-676 Year of construction2002 Mounted on mild steel frameStainless steel frame With switchgearcheck Floorspace2,50 x 1,40 m Total height2,50 m Extra SpecificationsWith stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature 20/+145°C, allowable temperature jacket, 2/+20°C,&:nbsp:Hot vessel, volume 30 L: allowable temperature +140°C,&:nbsp:Siemens touchscreen control, type Si ...

1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor

Key data: 100 mm, 3000 mm

Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Circular saw milling machine Bernardo CSM2000, good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kgPrices subject to change, errors, printing and typesetting errors excepted

General SKU279X361 MakeFluitec TypeFluitec Mixer CSE-XD/6 DN350/PN40: Type Q-L No.5482.1.1 Year of construction2016 LocationBarneveld Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume537 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity537 l. Vessel sizesø 355 mm OutletDN40 Max. temperature0 / 220 °C With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General Floorspace6,360 x 0,75 m Total height0,75 m Weight887,5 kg CEcheck Extra SpecificationsDesign code: PED 97/23/EGStainless Steel ReactorsFluitecReactors > Stainless Steel ReactorsBrand > Fluitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine.

General SKU335X732 MakeGEA Westfalia LocationBarneveld CEcheck TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW, 230/400 volt, 1400 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDia. 180 mm Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.1722986 Year of construction2003 Mounted on mild steel frameStainless steel frame With switchgearcheck Floorspace2,50x1,30 m Total height2,40 m Extra SpecificationsVolume 53 l., max operating pressure 2,6 bar, max operating temperature 133°C, : With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature +133°C, allowable temperature jacket, +20°C,  ...

Monochromatic sorter, working width 1 chute with 270 mm, for grain 2-5 t/h, sunflower seeds up to 1 t/h, mustard up to 0.7 t/h. Service from Dresden.

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)

Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: CSM -Pump type: -Digital clock: Type SPG-DIGI-B0400-B -Power: 0.55 kW 1360 rpm -Dimensions: 550/360/H380 mm -Weight: 34 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 23 x 9-10 SC 10 RIM 6.50F -Bolt circle: Ø 162 x 20 mm -Bore/recess: Ø 110 mm Quantity: 1 piece available -Dimensions: Ø 570 x 190 mm -Weight: 56 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc.

Tires, tires with rims, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Continental, tire CSE-Robust SC 15 with rim from GSL aerial work platform -Tire size: 23x9-10 PR 134A5 IC30 -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 115 x 15 mm -Hub bore: Ø 65 mm -Submission/Price: complete -Dimensions: Ø 560 x 215 mm -Weight: 43 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.