cs 300 used for sale

General SKU205M547 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M545 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M544 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M543 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435(316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kgSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

General SKU360U952 LocationBarneveld MakeHoeksma & Velt Leeuwarden No.002-369 Year of construction1990 Pressure Working pressure3 Bar Working pressure jacket2 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume3000 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4404 (316L) Notified bodyTÜV Capacity3000Ltr. Vessel sizesDia: 1700x1700 mm Dished topcheck Dished bottomcheck ManholeDN400 Top connectionsDia: 50 mm, 22 mm(4x) OutletDia: 50 mm Max. temperature150°C With jacketcheck Max. temperature150°C Information Mounted on legscheck Floorspace2x2 m Total height2,5 m Weight900 kgPressure vesselsHoeksma & VeltTanks > Pressure vesselsBrand > Hoeksma & Velt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

General SKU205M541 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU386W1189 LocationBarneveld MakeWipotec / OCS TypeSC 3000 C Mach.No.1100113 Main Features MaterialStainless steel Motor2.4 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) CapacityScanning speed 50m/min Motor2,4 kVA, 230 volt CapacityMax transport weight 10 kg Information Year of construction2011 Total height2,10 m CEcheck Floor space2,10x1,20 m Weight450 kg Extra SpecificationsIn and output belt conveyor, dimensions 270x1800 mm, X-ray tube, type MIR-160 HP/20 Touchscreen monitor control camera system Reject unit with 3 magnetic keys for different machine access levels. MiscellaneousWipotecMiscellaneous > MiscellaneousBrand > Wipotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU227K088 LocationBarneveld MakeItalvacuum Borgaro Torino TypeRBGS-3000 No.2825 Year of construction1991 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Tumbler dryer Capacity1200 Ltr Diameter1550mm Cylindrical length450mm Conical length850mm Inlet/manhole dia. 450mm Outletdia. 350mm With jacketcheck Motor0,47/0,95 KW, 380 Volt (Ex) With variable speed drivecheck With lump breaker(2x) MaterialStainless steel 1.4401 (316) Information Floorspace4,5x3,0 M Total height4,5 M Weight4200 KG ATEX compatiblecheckTumbler dryersItalvacuumDryers > Tumbler dryersBrand > Italvacuum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...

General SKU200T008 LocationBarneveld Makeullmann & Co Gmbh No.5225-A1 Year of construction2001 Pressure Working pressure0 Bar Main Features MaterialStainless steel Volume3000 Ltr. Motor7.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Closed stirring vesselcheck Capacity3000Ltr. Vessel sizesDia 1800x1800mm Conical bottomcheck Flat top sidecheck ManholeDia:500mm Top connectionsDN100(3x), DN 50(2x) OutletDN80 Max. temperature90°C With propellor stirrercheck Motor1,5kW, 230/400Volt, 1410rpm Speed mixing shaft334rpm Information Mounted on legscheck Floorspace2,10x1,8m Total height2,9m Weight600kgStirring vesselsUllmann & Co.Stirring vessels > Stirring vesselsBrand > Ullmann & Co. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

Key data: 8000 mm, 3600 mm, 1500 mm

Portal milling machine STRIGON MZP 3000x8000 CNC, control system NTC

General SKU205M539 LocationBarneveld Main Features Volume300 Ltr.SilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Introducing the versatile CNC Milling Machine with HEIDENHAIN iTNC530 control, designed for precision machining tasks across various industries. With impressive X, Y, and Z-axis travels of 3,000 mm, 1,700 mm, and 1,500 mm, respectively, this machine offers considerable flexibility for complex operations. The robust spindle delivers power between 28 kW and 38 kW, achieving speeds from 30 to 5,000 rpm, while the spacious worktable measures 3,200 x 1,200 mm and supports up to 8,000 kg. An electronic handwheel and chip conveyor enhance functionality, and the unit is 4th axis ready. Its ISO-50 DIN 69871A tool holder and cooling through the spindle further optimize performance. Available in [Location/Availability], this machine meets diverse manufacturing needs with reliable efficiency.

OVERHAULED - Size: 1.400 x 3.000 mm - With Electrical motor, Cardan shaft and Spring elements.

General SKU382X960 LocationBarneveld MakeSartorius Intec TypeIFS4-300II-L Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) Capacity200 kg Motor100-240 volt Capacityd=0,01 Information Mach.No.346 383 40 Floor space1,0x0,8 m CEcheck Total height1,0 m Weight60 kg Extra SpecificationsThis floor scale was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech Hoist, SKU 382X963 MiscellaneousPharmatechMiscellaneous > MiscellaneousBrand > Pharmatech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

Key data: 3000 , 1500 , 3000

1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.

grinding diameter: 360 mm grinding length: 3000 mm centre height: 180 mm total power requirement: 17 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/362, , = More information =, , Year of construction: 1010, Type number: DSI14.02 300KVA GENERATOR

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/33, , = More information =, , Year of construction: 1010, Empty weight: 2.250 kg, Type number: DSI14.02 300KVA GENERATOR

Control: OSP-P300 Max. turning length: 950 mm Max. turning diameter: 340 mm max. turning Ø over slide: 380 mm max. turning Ø over bed: 580 mm Max. speed: 4,200 rpm Tool holder: BMT 2 Tool Turrets A-turret: 12 tool positions (all driven) B-turret: 8 tool positions Tailstock Conveyor Hydraulic Power Chuck B210/A8 Touchsetter High Pressure Coolant Pump Enlarged water tank

: ATR 3030 Hawker Life-Plus TC3-LP-10KW Smart Charger for Forklift Batteries 24 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 16 mm distance between columns: 3050 mm : 15-1000 mm cutting angle adjustment: ja ° cutting gap adjustment: ja mm connected load: 30 kW weight of the machine ca.: 14,.5 t dimensions of the machine ca.: 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lippert belt conveyor GF 30000-750-600 RA2269 Technical data: Conveyor length (NL): 30000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 30000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0 ...

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Inv. Num. : 8497 Type: HSLX 3008 Producer: HACO Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 8 mm Back gauge: 1000 mm Equipment: Set of knives Truck with rear handling

CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm

Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Dimensions (L/W/H): 0x0x0 mm Weight: 870 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1680x930x1200 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4700x1600x1500 mm Weight: 580 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x950x1260 mm Weight: 400 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2900x1800x1100 mm Total power requirement: 0 kW Weight: 550 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

General SKU262X271 LocationBarneveld MakeProminox TypeCuve Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume403 Ltr. Motor2.2 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Processing vessels Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. ManholeDia. 204 mm OutletDN51 Motor2,2 kW, 230/400 volt, 1400 rpm Closed stirring vesselcheck Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. Conical bottomcheck Dished top sidecheck ManholeDia. 204 mm Top connectionscheck OutletDN50 Half coil jacketedcheck volume 13,3 l. Max. temperature150°C With anchor stirrercheck with scraper With dissolver stirrercheck Motor2,2 kW, 230/400 volt, 1400 rpm Speed mixing shaft5,3/32 rpm Motor5,5 kW, 240/380 volt, 1460 rpm Information No.30430 Year of construction2000 Mounte ...

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

Hebrock edge banding machine AKV 3005 DK-F Year of manufacture 2004 Equipment and technical data: max. edge thickness 3 mm with preparation for alternating pools min./max. workpiece thickness 8-60 mm Feed speed approx. 10 m/min Readiness for operation approx. 5 min. min. workpiece length 190 mm min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control Glue basin with contact roller Pressure zone Pruning shears Cross-cut saw Combination milling unit flush/chamfer/radius pneumatically adjustable 2- Milling station Corner Copy Unit Wing scraper, short version Radius scraper blade Spraying device Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg

cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.