cs 121 used for sale

Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T082 LocationBarneveld MakeDe Dietrich TypeCSV-1200-243 No.58678 Year of construction1990 Main Features MaterialGlass Volume2500 Ltr. Specified Features - Vertical tank MaterialGlass Closed vertical tankcheck Capacity2500 Ltr. Vessel sizesdia. 1200x2500 mm Dished topcheck With covercheck Dished bottomcheck Manholedia. 500 mm Top connectionsDN100, DN80, DN50 OutletDN80 Information Mounted on legscheck Weight930 kg Floorspace1,2x1,2 m Total height3,35 mVertical tanksDe DietrichTanks > Vertical tanksBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU335X731 LocationBarneveld CEcheck MakeGEA Westfalia AG TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW 400/690 V 1460 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDN40 Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L) Information No.1722-676 Year of construction2002 Mounted on mild steel framecheck Stainless steel frame With switchgearcheck Floorspace2,50 x 1,40 m Total height2,50 m Extra Specifications With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature 20/+145°C, allowable temperature jacket, 2/+20°C, : Hot vessel, volume 30 L: allowable temperature +140°C, : Siemens touchscreen control, type Simatic mult ...

1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor

Key data: 100 mm, 3000 mm

Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Circular saw milling machine Bernardo CSM2000, good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kgPrices subject to change, errors, printing and typesetting errors excepted

Manufacturer: Essemtec Model: CSM 7000 Plus (without feeder, with nozzle) Find more here - / Contact us at -

General SKU279X361 MakeFluitec LocationBarneveld CEcheck TypeFluitec Mixer CSE-XD/6 DN350/PN40: Type Q-L Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume537 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity537 l. Vessel sizesø 355 mm OutletDN40 Max. temperature0 / 220 °C Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.5482.1.1 Year of construction2016 Floorspace6,360 x 0,75 m Total height0,75 m Weight887,5 kg Extra SpecificationsDesign code: PED 97/23/EGStainless Steel ReactorsNew arrivalsFluitecReactors > Stainless Steel ReactorsNew arrivalsBrand > Fluitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

This LINCK VZM & CSMA was manufactured in 2018. It includes a CSMA pull-out device and a VZM centering device, both designed for high-performance in automated production lines. The CSMA offers flexible material guidance with a feed speed of 85 m/min, while the VZM provides precise centering at 84 m/min. Both units feature robust designs for demanding conditions and minimal use, ensuring excellent condition. Contact us for more information about this machine.

This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine.

General SKU335X732 MakeGEA Westfalia LocationBarneveld CEcheck TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW, 230/400 volt, 1400 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDia. 180 mm Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.1722986 Year of construction2003 Mounted on mild steel frameStainless steel frame With switchgearcheck Floorspace2,50x1,30 m Total height2,40 m Extra SpecificationsVolume 53 l., max operating pressure 2,6 bar, max operating temperature 133°C, : With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature +133°C, allowable temperature jacket, +20°C,  ...

Monochromatic sorter, working width 1 chute with 270 mm, for grain 2-5 t/h, sunflower seeds up to 1 t/h, mustard up to 0.7 t/h. Service from Dresden.

Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: CSM -Pump type: -Digital clock: Type SPG-DIGI-B0400-B -Power: 0.55 kW 1360 rpm -Dimensions: 550/360/H380 mm -Weight: 34 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, 2-phase stepping motor driver stepper motor driver unused original packaging -Type: CSD2120-T -Dimensions cardboard: 140/90/H70 mm -Weight: 0.2 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 23 x 9-10 SC 10 RIM 6.50F -Bolt circle: Ø 162 x 20 mm -Bore/recess: Ø 110 mm Quantity: 1 piece available -Dimensions: Ø 570 x 190 mm -Weight: 56 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc.

Tires, tires with rims, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Continental, tire CSE-Robust SC 15 with rim from GSL aerial work platform -Tire size: 23x9-10 PR 134A5 IC30 -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 115 x 15 mm -Hub bore: Ø 65 mm -Submission/Price: complete -Dimensions: Ø 560 x 215 mm -Weight: 43 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 3 pieces -Tire size: 250/50-10 SC 10 RIM 6.50F -Rim: Mefro 41042 106 6.50F-10 ET 25 -Bolt circle: Ø 150 x 19 mm -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 450 x 210 mm -Weight: 35 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 10, 4 pieces -Tire size: 4.00-8 SC 10 RIM 3.00D -Rim: Mefro 3.00D-8 603663 ET-10 -Bolt circle: Ø 100 x 16 mm -Hub bore: Ø 60 mm -Delivery/Price: complete -Dimensions: Ø 410 x 105 mm -Weight: 14 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg

cutting diameter: 440 mm saw band length: 5200 x 1,1 x 34 mm cutting width: 610 x 440 mm cutting speed: m/min total power requirement: 3,7 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,7 x 1,55 x 1,5 m Band saw horizontal - Coolant system - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifuge decanter of the brand Centrisys, model year 2011, 300-400 kg DM/h, machine in very good condition. Accessories included in the price, control cabinet, frequency regulator. In production until September 2026

This 6-axis Stäubli CS8C-RX160 was manufactured in 2017. It features a maximum payload of 30 kg and a reach of 1710 mm, making it suitable for various applications. The robot arm is designed for high-speed performance with a maximum TCP speed of 10.3 m/s. If you are looking to get high-quality automation capabilities, consider the Stäubli CS8C-RX160 robot arm we have for sale. Contact us for further details.

TECHNICAL DATA: Installed power: 15 kW Operating pressure: 10 bar INCLUDED IN DELIVERY: Container (500 l) Dryer Inverters

TECHNICAL DATA: Installed power: 15 kW Operating pressure: 10 bar INCLUDED IN DELIVERY: Container (500 l) Dryer

II sell a BITZER screw compressor. Fully functional. The compressor has 18470 working hours. It worked in a production hall on a chiller with a water condenser. The compressor has a power supply of 660 - 720 V The compressor worked with R 134a refrigerant.

Screw compressor Kaeser CSD122 75 kW 8 bar 12.01 m3/min Year of Make: 2010 Hours: 19,128

3000 x 13mm with power back gauge and rear sheet supports

Capacity: 10.000 bph Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

Separator Bactofuge GEA Westfalia CSI 230 1734-326 Working Hours 14,000 Year of Construction 2014 Still installed in the factory, Schedulued for Dismantling June 2026 Includes Control Panel, Tools, Technical Documentations and Instruction Manuals Requires Regular Maintenance Due to 9 Years of standing out of operations, as on the pictures After technical maintenance it is destined to work for you another 30-40 years We deliver worldwide or Collection by your forwarding company after full payment Commissioning in your location possible after agreement at extra cost

Used Case Sealer ITAL PAL CSN70 1650 boxes/hour The Used Case Sealer ITAL PAL CSN70 1650 boxes/hour is a machine specifically designed for the automated sealing of American boxes using adhesive tape. Manufactured in 2013, this model operates at a speed of 1650 boxes per hour, thereby ensuring high efficiency in industrial packaging processes. Technical Features of the ITAL PAL CSN70 Case Sealer First and foremost, the ITAL PAL CSN70 model includes safety protections that fully comply with industrial safety regulations. Additionally, it comes with technical manuals for seamless configuration and maintenance. Furthermore, the machine is currently in production, which demonstrates its full operational capacity and long-term reliability. Structurally, the case sealer measures 4600 mm in length and 2600 mm in depth, thus allowing for easy integration into existing production lines. Moreover,  ...

pressure:63 t throat:320 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:750 x 600 mm pressure of drawing cushion in table:6,5 t stroke of drawing cushion in table:80 mm die cushion area:240 mm table height over floor:800 mm ram surface:500 x 450 mm capacity of ejector in ram:0,5 t ejector stroke in ram:70 mm speed down:300 mm/s speed up:300 mm/s working speed:50 mm/s oil volume:380 l power requirement:12,0 kW weight:6,5 t dimensions (WxDxH):1,3 x 2,0 x 2,75 m drawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical cutting impact cushioning:hydraulic

Locking system, MGB-L2-ARA-AM5A1-S1-R-121190 + MGB…., Euchner, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Scope of delivery: - 1 piece guard locking and monitoring, MGB-L2-ARA-AM5A1-S1-R-121190, Euchner - 1 piece handle module, MGB-H-AA1A1-R-100464, Euchner - 1 piece connection cable 18-pole incl. plug 8.4m long, Euchner Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequen ...

Formcook combi grill Belt width: 1100 mm Grill length: 11.000 mm Heating: thermic oil Cooking time: 3-50 min. Maximum temperature of 250 degrees Celsius Power: 25 kW Dimension: 12.825 x 1740 x 2323 mm Weight: 10.000 kg

- MWM Mixture Pipe - Please note! Price per piece! - 12141922 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into our opera ...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions  ...