crushing used for sale

Used grinding mill from UPMACH Superfine Crusher type SFG 300, year of manufacture 2023. The machine is in working order, not used much. Fine mill with grinding head cooling system (chiller). It has a manual adjustment of the degree of fineness. Spare disc included.

High throughput tray washing system, designed to accommodate a total of up to 1500 crates per hour, split over two conveyorised lanes.

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liqui ...

Jaw Crusher System for Sale Manufacturer: 3-B-Systeme Year of Manufacture: 1992 Operating Hours: 2,144 h The system consists of the following components: - . (Pos.1) 1 piece Müller jaw crusher, Rottweil, 800x500 mm inlet opening .Jaws approx. 70-80%, upper part new. - (Pos.2) 1 piece of steel construction from 3-B-Systems with pre-screening and bunker attachment - (Pos.3) 1 piece crushed material discharge belt - (Pos.4) 1 piece overband magnet - ( Pos.5) 1 piece 200 kVa power generator, soundproofed Find more here - .ucymachines/ Contact us at - sales@ucymachines

Description Item # 9358 - RUSK & CRUMB (Breadcrumb-Type Filler) PRODUCTION AND PACKAGING LINE Suitable for bakery crumb, coating crumb, and meat-industry filler manufacturing A complete, proven rusk and flake-bake production line, formerly processing 3 tonnes/hour of flour into 2.5 tonnes/hour of finished rusk and flake bake (used as a filler in sausages, pies, coatings and stuffing mixes). The line ran continuously until the site was sold in December 2025, with numerous safety upgrades installed throughout its operating life. Line includes: 2x Baker Perkins dough mixers – recently upgraded motors and gearboxes Dough sheet former – forms the dough sheet ahead of the oven Spooner oven – stainless steel panelling, three burners and controls renewed in 2024 Peg roller – breaks the biscuit sheet at oven exit Cracker – reduces biscuit to a manageable size for the next process 2x Mik ...

ATTENTION! - lot currently located in Targu Mures (collection address) Manufacturer: Sandvik Model: QI341 Year: 2014 Serial number: 0900B13053 Order number: S0013800 Engine number: REH00900 Nominal power: 261 kW Operating mass: 46,000 kg Engine hours: 4191 Crushing hours: 3472 CE Marked: Yes Engine: Diesel engine Control system: Sandvik electronic control display Tracks: Crawler mounted undercarriage Crusher type: Single toggle jaw crusher Feed hopper: Hydraulic folding hopper Main conveyor: Hydraulic discharge conveyor Side conveyor: Installed (as photographed) Magnetic separator: Installed (overband magnet visible) Condition: Used mobile jaw crusher in working condition. Machine shows typical wear consistent with age and usage. Conveyor belts, hopper, crusher chamber and undercarriage in used condition. Control panel functional. Visual i ...

The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suita ...

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system

The shredding plant is equipped with two powerful bevel gear motors, delivering a combined total power of 60 kW (2 x 30 kW). The chamber length of the RedUnit XRL is 1600 mm, designed for extensive shredding tasks. With a speed of 42 min⁻¹, the machine operates efficiently and reliably., The power supply is 400 V AC at 50 Hz electrical frequency. The motors are of high quality and lacquered, meeting the latest standards (AGM4606.TF). The operating temperature range is from 0°C to +50°C, so the machine operates reliably under various climatic conditions., MODERN CONTROL AND AUTOMATION:, The crushing system features a fully automatic control with the PCU type SQF0050 and a Performance Control Unit (SQF0060). Operation is via a modern 10-inch touch panel that enables user-friendly operation and intuitive control. The system supports both automatic operation and manual hand operation.,  ...

We offer a Microslicer BMC125-7.5 food machine for the production of flowable products and bulk materials. It is ideally suited for fine shredding and emulsification for meat, sausage, confectionery and delicatessen production. Application examples: - Emulsification of sauces and dressings in circulation, such as desserts, sauces, emulsions, dips, mayonnaise, ketchup, pastes - Production of boiled sausage and cooked sausage meat, rind emulsion - Crushing and straining of fruits and vegetables - Nut and almond crushing - Crushing of biscuit and chocolate curds The machine consists of a 50 litre hopper incl. lid with an agitator incl. scraper and a knife for pre-shredding, a contactless 125mm cutting set (rotor-stator principle, 3,000 rpm, 0.5mm cutting gap), a motor block with a powerful 7.5 KW motor (400 volts) incl. 6m cable and 32A plug, a round spout optionally for liquids  ...

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

ID3355 Grit Plant/Split Plant year/Year of construction 2002 Grit plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16 Split plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16

TECHNICAL SPECIFICATIONS Manufacturer: LOKOMO Description: Semi-Mobile Crushing Plant Type: Stationary Year of construction (complete complex): 2009 Crusher Type: C 100, Single Swing Jaw Crusher Inlet opening: 1,000 x 800 mm Throughput: 150 - 200 t/h Maximum feed size: 600 mm Drive power: 132 kW Broken product: 0 - 120 mm Adjustable gap width: minimum 100 mm Feed hopper capacity: 25 t Drive power vibratory feeder: 18 kW Discharge belt: 12,000 mm length, 1,000 mm width Drive power discharge belt: 22 kW SPECIFIC COMMENT - Complete system - Designed and refurbished in 2009 (no use yet) - Numerous spare and wear parts included - Incl. hydraulic hammer type RAMMER S 25

Twin-shaft crusher / lump crusher for crushing and loosening lumpy material. Drive via Bauer geared motor with 5.5 kW and friction clutch. Infeed dimension: 1,000 mm x 280 mm.

ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank

Manufacturer: Metso Outotec Finland Oy Year of Manufacture: 11/2021 Model / Type: J90 Type of Machine: Mobile Crusher (Jaw Crusher) Technical Specifications: - Nominal Power: 162 kW - Mass: 22700 kg - Operating Hours: approximately 1250 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

\" General Description Jet-powered pontoon boat manufactured by Sea-Doo (Bombardier Recreational Products Inc. – BRP) , model Switch Cruise 21-230 . Designed for recreational cruising and leisure activities on inland and coastal waters. The modular Tri-Hull pontoon design combines a spacious deck layout with Sea-Doo's Rotax jet propulsion system. Supplied with a twin-axle galvanized trailer. Technical Details Manufacturer: Sea-Doo (BRP) Model: Switch Cruise 21-230 Year: 2022 Hull Identification Number (HIN): CA-YDVC6340G222 Engine: Rotax 1630 ACE 230 ECT Engine serial number: MP425867 Power: 230 HP (169 kW) Hull type: Tri-Hull pontoon Jet propulsion with iBR Intelligent Brake & Reverse Closed-loop cooling system Fuel tank: 110 L Length: 6.20 m Beam: 2.40 m Dry weight: Approx. 1,156 kg Maximum load: Approx. 675 kg Passenger capacity: Up to 9 persons (registration ...

Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera monitoring at  ...

ID3854 Metso C80 year/Year of construction 2008 Jaw crusher, feed opening 800 x 510 mm, shaft is seized, incl. 4 spare crushing plates, housing repaired, machine is complete in terms of parts (flywheel, drive pulley, motor, bearing housing, covers), machine is disassembled. Jaw crusher, inlet opening 800 x 510 mm, shaft is fixed, incl. 4 spare crushing plates, housing repaired, machine is complete on parts (flywheel, drive wheel, motor, bearing housing, covers), machine is disassembled

Vintage: 2022 Appellation: Saint-Émilion Grand Cru Region: Bordeaux Quantity: 18 bottles Capacity: 75 cl Classification: Château La Croix Mazeran 2022 - Saint-Émilion Grand Cru - Bordeaux Packaging: case of origin Auction-ID: A1-51167-545

Vintage: 2022 Appellation: Saint-Émilion Grand Cru Region: Bordeaux Quantity: 12 bottles Capacity: 75 cl Classification: Château La Croix Mazeran 2022 - Saint-Émilion Grand Cru - Bordeaux Packaging: case of origin Auction-ID: A1-51167-544

Vintage: 2023 Appellation: Montagny 1er Cru Region: Burgundy Quantity: 12 bottles Capacity: 75 cl Classification: Montagny 1er Cru 2023 - Vignerons de Buxy - Burgundy Packaging: case of origin Auction-ID: A1-51167-228

Vintage: 2006 Appellation: Alsace Grand Cru Region: Alsace Quantity: 6 bottles Capacity: 75 cl Classification: Gewurztraminer Vendanges Tardives Goldert Grand Cru 2006 - Domaine Zind-Humbrecht - Alsace - Alsace Packaging: case of origin Auction-ID: A1-51167-354

Vintage: 2021 Appellation: Alsace Grand Cru Region: Alsace Quantity: 6 bottles Capacity: 75 cl Classification: Muscat Grand Cru Goldert 2021 - Domaine Zind-Humbrecht - Alsace - Alsace Packaging: case of origin Auction-ID: A1-51167-349

Vintage : 2023 Appellation : Montagny 1er Cru Region : Burgundy Quantity : 12 bottles Capacity : 75 cl Classification : Montagny 1er Cru Les Coeres 2023 - Vignerons de Buxy - Burgundy Packaging : case of origin Auction-ID: A1-51167-230

Vintage: 2023 Appellation: Montagny 1er Cru Region: Burgundy Quantity: 18 bottles Capacity: 75 cl Classification: Montagny 1er Cru Les Coeres 2023 - Vignerons de Buxy - Burgundy Packaging: case of origin Auction-ID: A1-51167-231

Vintage : 2022 Appellation : Alsace Grand Cru Region : Alsace Quantity : 6 bottles Capacity : 75 cl Classification : Riesling Grand Cru Rangen de Thann Clos Saint Urbain 2022 - Domaine Zind-Humbrecht - Alsace - Alsace Packaging : case of origin Auction-ID: A1-51167-350

Vintage: 2022 Appellation: Alsace Grand Cru Region: Alsace Quantity: 6 bottles Capacity: 75 cl Classification: Riesling Grand Cru Hengst 2022 - Domaine Zind-Humbrecht - Alsace - Alsace Packaging: case of origin Auction-ID: A1-51167-347

Vintage: no vintage (NV) Appellation: Chablis 1er Cru Region: Burgundy Quantity: 12 bottles Capacity: 75 cl Classification: Chablis en 1er cru - Bailly Lapierre - Burgundy Packaging: case of origin Auction-ID: A1-51167-238

Vintage: 2020 Appellation: Saint-Émilion Grand Cru Region: Bordeaux Quantity: 30 bottles Capacity: 75 cl Classification: Château Chevalier Lescours 2020 - Saint Emilion Grand Cru Packaging: case of origin Auction-ID: A1-51167-532

Vintage: 2023 Appellation: Montagny 1er Cru Region: Burgundy Quantity: 12 bottles Capacity: 75 cl Classification: Montagny 1er Cru 2023 - Vignerons de Buxy - Burgundy Packaging: case of origin Auction-ID: A1-51167-229

Toyota Land Cruiser 3.0 D-4D 4x4 automatic – 2003 – 567,790 km – 3,500 kg towing weight Specifications: Brand: Toyota Model: Land Cruiser Year of construction / first admission: 2003 Odometer reading: 567,790 km Transmission: automatic Drive: 4x4 Tare weight: 2.010 kg Maximum towing weight: 3,500 kg braked Features: 5-door off-road vehicle Automatic transmission All-wheel drive Roof rails Running boards Tinted rear windows Alloy wheels, black All-terrain tires Particularities: Vehicle drives, runs and shifts well. MOT valid until 02-2027. PLEASE NOTE: this vehicle has a license plate registration. NL registration: 48-BJ-VN. Upon collection, the vehicle must be registered with a third party on site or exported. There are additional costs associated with this. Auction-ID: A1-47423-2225

Professional immersion grinder ROBOT-COUPE MP 800 Turbo. Inventory status: Refurbished. Brand: ROBOT-COUPE. Model: MP 800 Turbo. Internal reference: RS01137. Product code: 34890L.Serial number: Q7580119001. Professional equipment with a large capacity for crushing, mixing and emulsifying food. Nominal electrical power: 1,000 W.Power supply: 220-240 V / 50-60 Hz / single-phase. Rotation speed: 9,500 rpm. Length of the crushing arm: 740 mm.Approximate working capacity: up to approximately 400 litres. Blade, hood and shredder tube made of stainless steel. Removable blade, hood and arm for easy cleaning. Equipped with Electronic Booster System for optimisation of motor performance. EasyPlug system with detachable power cable. Approximate total length: 1,130 mm.Approximate maximum diameter: 125 mm.Approximate dimensions (width x depth x height): 125 x 125 x 1,130 mm.Reference net weight: 7.1  ...

Track-mounted impact crusher plant/ impact mill SBM REMAX 1318/11E/D-S1 Year of manufacture 2004 + approx. 15,100 operating hours Deutz diesel engine 314 kW + generator set 300 kVA Crawler undercarriage  Feed hopper 4.5 m³ Vibratory feeder with stepped grate pre-screening Side discharge conveyor Secondary screening unit with return belt 2 pcs stockpile belts (fine-grain belt can be swivelled) Weight approx. 47 t Transport dimensions: length 17.5 m x width 3 m x height 3.75 m Crusher discharge chute does not work (electrical problem) otherwise good, operational condition  Net price ex site 95,000,-- € + VAT Sale from location D - BL Thuringia Code Q19

Set of 4 DISNEY – Villains Cruella d'Enfer dolls with accessories – New in original packaging Lot of 4 Disney Villains Cruella d'Enfer dolls, new, presented in their original packaging, with accessories included: handbag and pair of shoes. Important information – to be read before bidding Goods from discontinued and surplus products, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her appreciation of the lot. Auction-ID: A1-51086-302

Set of 2 DISNEY – Villains Cruella d'Enfer dolls with accessories – New Set including 2 Cruella d'Enfer dolls with their accessories. New products in their original packaging. Important information – to read before bidding Goods from discontinued series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-505

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.

We offer: Roller E 247165 Defect roller Crushing roller for TBA 8 aseptic filling machine Intermediate sale reserved

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

High-performance fine cone crusher Calibrator 1600/300 H III

Working widths: Eingangsbreite 400 mm Clouth speed: 20 m/min Fabric content: 50 m air pressure - required: 6 bar voltage: 380 V / 50 Hz Crushing-machine for getting crush-effects in warp-direction. The cloth is feeded into a funnel by a setting unit. The pneumatical controlled plunger puts the fabrics into the guide tube vertically and horizontally. The fabrics will be pushed into the hose which is slipped over the guide tube and then pressed. Afterwards the closed hose will be treated by saturated steam. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Crusher type RS 650

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Double Toggle Jaw Crusher Type: KS 1250/1000/04 Year of Make: 1997 Inlet opening (width x height): 1,250 x 1,000 mm Net weight: approx. 60 t. Drive power: 160 kW Grease lubrication pump: yes SPECIFIC COMMENT - Incl. inlet box - Incl. complete set of crushing jaws - Incl. printing plates and spare parts - Eccentric swingarm torn, spare swingarm available - Ideal for crushing hard rock

Stock number: D356, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hydraulic block ice crusher, Construction: Inlet funnel in the top, Dimensions: L 1400 x W 1700 x H 2350 mm, Dimensions Crushing chamber: L 1100 x W 600 x H 700 mm

A crawler-mounted crushing plant Remax including a land conveyor system is available. 1) Double roll crusher Remax CR 810 Hybrid, year of manufacture: 2015, operating weight: approx. 230t, conveyor belt width: 1600mm, conveyor belt length: 12200mm, discharge belt type: Mobcon, discharge belt width: 1400mm, discharge belt length: 40m, feed hopper volume: approx. 30m², feed hopper length: 4500mm, feed hopper width: 6000mm. Including plate conveyor (1.8m/9.5m) with crawler track, cleaning conveyor (2m/5.3m), transfer station (1800mm/1800mm), electrical equipment and control. 2) Two-part land conveyor system, year of manufacture: 2015, width: 1400mm, belt speed: 1.5m/s, conveying capacity: approx. 1000t/h, length 1/2: 190m/165m. The enclosure of the land conveyor system is only partially available. Documentation available. An on-site inspection is possible.