crown cap used for sale

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes. Machine is without dosing unit / filler., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot  ...

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

z.B. for Borelli Alexa / Futura screw capper

with 5 capping heads amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW)

Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW)

Capsule type: winecapsule shrinking, winecapsule applicator capacity / hour ca.: 16000 working direction: right-left (CCW) Working type: fullautomatic amount of capping heads: 8 electrical power supply kW: 8

18er Valve Monobloc volumetric piston filler with 6 head capper filling valves: 18 capacity / hour ca.: 9000 capping heads: 6 working direction: right-left (CCW)

amount of capping heads: 1 capacity / hour ca.: 450 working direction: semi automatic bottle height min. [mm]: 350 cap sorting system: Vibrating container Strom / Volt: 220 weight [kg.]: 90

amount of capping heads: 6 type of closures: 30 x 60 working direction: left-right

set for 31,5 x 24 caps. 3 capping heads

amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: left-right cap sorting system: sorting by disc weight [kg.]: 1000 electrical power supply kW: 380

type of closures: 28 x 15 working direction: rotating turret

aluminium caps ranging from diameters of 18 [mm] to 38 [mm]

amount of capping heads: 6 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) cap sorting system: Vibrating container weight [kg.]: 1,5

Zalkin type CA4 I 300 - serial no. 24361 Stelvin Lux cap 30 x 60 mm with cap feed 4 pcs. cap heads type VS 150, 250 litres cap feed with bars.

Machine completely in stainless steel Stainless steel frame with plexiglass doors with safety sensors whereby the machine stops automatically when the doors are open. Safety switches on the stars, worms and all moving parts whereby the machine stops Automatic magazine for the capsules Very well maintained All documentation available Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 6000 working direction: left-right Working type: fullautomatic amount of capping heads: 8

Machine is for Guala Closures with 5 capping heads

incl. dispenser Working direction: left-right Number available (price per tank): 1 Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 4000 working direction: rotating turret, left-right Working type: fullautomatic amount of capping heads: 4

Consisting of: - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Capacity: 10.000 bph Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel

BVS&MCA 4 heads BVS 30x60mm 4 heads MCA 28mm 4 heads MCA 28mm Varivent new control cabinet with S7 1200 New sorting device Cap inspector amount of capping heads: 6 capacity / hour ca.: 9000 type of closures: 28 x 15, 30 x 60 working direction: left-right cap sorting system: sorting by disc

Width 1.2 m Height 2 m Length 4.6 m

Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Year of construction unknown The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be installed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Serial number 0042-08-2006 The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be installed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5

Machine 1 Elopak Carton Filling Machine - Manufacturer: Elopak - Machine type: carton filling machine - Control system: Siemens Simatic Panel PC - Configuration: Dual lane (Line 1 and Line 2) - Total carton counter (machine lifetime): over 461 million cartons - Condition: Used, currently installed and in production - Total picker counter (lifetime): 462,280,647 cartons - Total outfeed counter (lifetime): 461,210,559 cartons Machine 2 Meurer MTP 25-B 400 Tray and Wrap-Around Case Packer - Manufacturer: Meurer - Model: MTP 25-B 400 - Year of manufacture: 2011 - Main motor operating hours: 68,742 - Air supply: 6 bar - Speed: up to 25 cycles per minute - Formats: simple trays, wrap-around cases, two-piece lid and base configurations - Included: Meler Micron+ TO hot melt glue unit - Control: touch screen operator panel - CE marked, made in Germany Find more here - .ucymachines/ Contact u ...

Used capsule filling machine made by MG2 model G37N . New 1986 Capsule filling machine for filling #0, #1, and #2 capsules with pellets (gravity-fed filling; no compression). Includes #0, #1, and #2 formats and spare parts.

Emerito 1.8 Capper 2016, Twist -off capping machine, lids from TO27 - TO82 diameter, height of lid up to 18mm DTO, Containers from diameter 30mm to 106mm, height from 40mm to 260mm, up to 70 bottles per min, variable speed, previously used on 65mm caps, with manual, 3Ph

Gelulleuse MACOFAR for CD20-type powder, Sold with 3 powder formats: 00, 0 and 1, Maximum theoretical speed: 20 000 / hour, 50Hz / 2.5kW, Net weight 800kg, Sold with its vacuum pump, Elec:: 3+N+P, Link to manufacturer: .romaco/products/product-details/cd-series

Gellulier LGA, Machines for filling 100 capsules with vibrator., Current format: size 2., Dimensions (mm): 355x260 H 210

GEA Sour Cream Thermization Line, Capacity: 1,500–2,000 l/h, Year: 2013, Installed & Connected – Excellent Overall Condition, Complete GEA Process Line, We are offering a complete GEA Sour Cream Thermization Line originally designed for the, thermal treatment of sour cream and fermented cream products., The line was installed in 2013 and remains installed and connected on site. It is available for, inspection and can be offered complete with associated process equipment, automation,, and technical documentation., The system was supplied as a complete GEA process line and includes a buffer tank,, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and, fully automated process control., Main Application, Originally designed for:, • Sour Cream, • Fermented Cream (25% fat), Potential Applications, • Kefir, • Cultured Buttermilk, • Drinkin ...

Seamless Tube Hot Rolling Mill Equipment From European Seamless Tube production facility in France. Equipment Scope: Hot Rolling section combines Stiefel-type piercing and Assel-type elongation, followed by calibration and rotary sizing, enabling tight dimensional tolerances, low eccentricity, and flexible production scheduling. Learn More • Industrial-grade Hot forming and Rolling assets • Designed for seamless tube production - billet → pierced tube → elongated tube • Suitable for relocation, reuse, or integration into existing steel/tube operations Whatsapp +31 6 51199492 A. Reheating / Thermal Preparation Section • Billet heating furnace systems • Temperature conditioning systems for hot deformation readiness B. Piercing Mill Section (Core Tube Formation Stage) • Rotary piercing mill (seamless tube initiation) • Mand ...

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Carousel-type machine with 24 closing points., Additional title: with 24 capping heads, Capacity of filling line: 5000 bo/h, Features: switch cabinet with control panel, 24 capping heads

Automatic Adelski capping machine for automatically closing bottles with screw caps. Number of capping heads: 3, max. capacity: approx. 10000bottles/h, direction of travel: right → left. Including approx. 160000pcs caps. Weight: approx. 1750kg. Documentation and wiring diagrams available. Viewing possible by appointment.

Combined de-capper for screw tops and crown caps. Combined unscrewer and uncorker. Equipped with 2 unscrewing and one uncorking hoods. The machine is operated with 2 hoods installed at the same time, which corresponds to 4 unscrewing/decorking heads. Velocity of the crate conveyor: 0,6 m/s., Capacity: 40000 bo/h, Pneum. working pressure: 10 bar, Power: 11 kW, Current: 25 A, Voltage: 230/400V, 24V control voltage, Frequency: 50 Hz, Length: 2900 mm, Width: 1260 mm, Height: 2000 mm, Formats: 0,5 l NRW, 0,5 l Euro, 0,33 l Steinie, screw caps and crown caps, Operation / Control: Simatic S7, Features: 2 Hoods with 2 heads each for screw tops,1 hood with 2 heads for crown caps, crate transport conveyor, crate lock with initiator, limit switch, cork detection, hydraulics, light barriers, hydraulic valve, door switch, compressed air connection, control cabinet

A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.

Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo

Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible.

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation

Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m, Features: 8 capping heads

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Technical Specifications & Performance Data The New Filling / Capping Monoblock 24.6 is engineered for accurate, high-speed oil filling and secure press-on capping in a compact, hygienic frame. Designed for modern industrial packaging environments, it combines weight-based filling precision with consistent closure application to maximize uptime and quality. Rated output: up to 11,000 bottles/hour (application-dependent) Filling system: load cell–controlled, gravity-fed, contactless nozzles; atmospheric operation with weight-based dosing Accuracy: per-valve weigh control; gram-level resolution per liter for consistent net-weight results Filler configuration: 24 filling valves Capper configuration: integrated press-on capper, 6 heads Closure type and size: plastic press-on caps, 28–30 mm Bottle formats: 0.06 L, 0.375 L, 0.50 L, 0.75 L Container material: PET (primary compatibility) Pro ...

Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview 2020 rotary 24-valve volumetric unit with fixed nozzles and a 1-head crown capper, rated 6000 Bottles/hour. Configured for PET containers in 1 L format with neck 28 and clockwise rotation. Manufacturer: VARIOUS BRANDS, Model: 24.8 volumetric. Non-aseptic and non-isobaric operation for still products. This compact Second-Hand PET Filler is a rotary monoblock filling machine suited to detergents, liquid soap, oil, spreads and sauces, and still water lines. This used filler for sale is presented as installed; format and utilities checks are recommended prior to commissioning. Technical Specifications & Performance Data Configuration: Rotary monoblock with volumetric filler and integrated capper Manufacturer / Model: VARIOUS BRANDS / 24.8 volumetric Year: 2020 Container material: PET Formats: 1 L Product types:  ...

Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle

Used Acma rotary filler capper monoblock for liquid soap - year 2003Technical Specifications & Performance DataThis ACMA rotary filling monoblock integrates a precision filler and capping unit with an automatic cap sorter, delivering reliable throughput for liquid detergent production and industrial packaging applications. As a second hand solution ideal for a used bottling line, it combines compact footprint with robust engineering.Manufacturer: ACMA (Corniani division) Model: RCCA-1562 Manufacturing year: 2003 Production speed: up to 105 bpm depending on format Format performance: 0.45L: 95–100 bpm; 0.5L: 100–105 bpm Compatible formats: 0.45L, 0.5L Container handling: Designed for PET and Glass bottle handling (with appropriate change parts) Electrical supply: 380 V, 50 Hz, 10 kW Auxiliary circuits: 24 V Pneumatic pressure: 6 barAdvanced Automation & Control SystemsThe monoblock fe ...

Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows ope ...

Used Self-Adhesive Labeller with Shrink Capsule Applicator – 2000 bph – Overview Second hand E-Packaging Saturno 2T linear labeling line with integrated shrink capsule applicator and heat heads. Designed for industrial packaging in food and beverage production, this unit applies front and back self-adhesive labels and finishes bottles with a shrink capsule in a compact, operator-friendly layout. Ideal for upgrading a used bottling line with reliable labeling and capsule finishing at up to 2,000 bottles per hour. Technical Specifications & Performance Data Model: E-Packaging Saturno 2T Year of manufacture: 2015 Configuration: 2 labeling stations (front + back) Labeling method: Pressure-sensitive/self-adhesive (PSL) Capsule system: Capsule applicator with shrink heat heads Bottle flow: Linear Formats processed: 250 ml and 500 ml Nominal speed: approx. 2,000 bph (format/label dependent) ...