cross cutting used for sale

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar jib crane, indoor crane, workstation crane, chain hoist -Manufacturer: GT-Hebetechnik, crane traverse for the transport of various loads -Load capacity: 8000 kg -Distance between hooks: min. 1000 mm / max. 2500 mm -Steel rope: O 22 mm, length 1600 mm -Dimensions: 2620/360 / H890 mm -Net weight: 304 kg

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg with pallet

Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details.

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

Very good condition. Filterelements should be replaced.

Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm -Weight: 218 kg

Manufacturer: Texnology Model: MASCOTT-Plus-25-30-CRZ-1 Year of Manufacture: 2010 Specifications: - Working width: Feeding: 2.5 m; Exit: 3.5 m - Speed: 70 m/min Additional information: - Includes control system, cabinet and panel Find more here - .ucymachines/ Contact us at - sales@ucymachines

Automatic Pneumatic Workpiece Clamp  Cutting height 280 mm at 90 Cutting height 140 mm at 30 mm Engine power 11KW/15hp Separating cuts Mitre cuts  Schifter cuts, longitudinal sections  Throat rafters, eaves planks, Burrs, cutting wedge planks Roller conveyor strong version right  incl. roller table and longitudinal stop L=2500 mm side-movable Roller conveyor strong version left  incl. roller table and longitudinal stop L=2500 mm side-movable

Technical data: - Saw blade dimensions up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds 40 + 80 1/min - Cutting range at 90° around 100 mm - flat 120 x 85 mm - Mitre adjustable on the left up to 45 ° - right up to 30 ° - Material vise - Drive 400 V / 1.0 / 1.2 kW - Space requirement approx. W 600 x H 800 x D 700 mm - Weight approx. 180 kg

STRASSBURGER Cross-Flow Filter MCC 120/6-C17 Features: Length 1100 mm Width 800 mm Total height 2200 mm Output 3,000-5,000 litres per hour, depending on the turbidity content Technical documentation available

The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Used cross-flow filtration sytem - year 2016Technical Specifications & Performance DataThis automatic microfiltration system is engineered for high-reliability liquid filtration in beverage production and industrial packaging environments. Built around a stainless steel electrical enclosure, it supports precise process control for consistent filtration performance across demanding applications, including integration into a used bottling line or second hand production setups.Main supply: AC 400 V; 50 Hz; 3F+N+PEAuxiliary supply: AC 230 V; 50 Hz; F+N+PEControl voltage: DC 24 VShort-circuit rating (Icc): 10 kAInsulation voltage: 500 VProtection rating: IP55 stainless steel cabinetSystem earthing: TN-SCabinet dimensions: 1200 (W) x 1600 (H) x 400 (D) mmMax cable length (field devices): 50 mEmergency circuit: IntegratedStandards: IEC 61439-2:2014Advanced Automation & Control SystemsThe system ...

Used Cross-Flow Filter SEFILTRA up to 3000 L/h Introduction to Cross-Flow Filtration Firstly, the SEFILTRA cross-flow filtration is a cutting-edge solution in the bottling field. This specific model, the BF2-S SEF, produced in 2020, stands out for its capacity to process up to 3000 liters per hour. Moreover, cross-flow filtration uses organic membranes for optimal efficiency, representing an advanced and reliable technique in liquid treatment. Technical Features of the BF2-S SEF Furthermore, the BF2-S SEF by Sefiltra is currently in production and continues to demonstrate its efficiency and reliability. With a filtration speed of 3000 L/h, this system is ideal for medium-volume applications. Additionally, the organic membranes used in the cross-flow filter allow for an effective and gentle separation, preserving the liquid’s qualities intact. Safety and Documentation of the Cross Flow  ...

Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system

Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  Capacity: approx. 50 hl/h (tandem system, 24h operation) Filtration type: Crossflow (microfiltration) Number of modules: 48 Operating temperature range: 0°C to 70°C Equipment: Pumps, integrated CIP system, complete piping, control system Control system: Siemens S7 with Siemens OP07 HMI Automation level: Fully automatic Equipment ...

A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, contact points: steel, membrane housings: 5, filter housing volume: 17, max. operating temperature: 95°C, max. operating pressure: 6bar, connected load: 35kVA. The system has no prefilter. Documentation available. An on-site inspection is possible.

A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, construction: stainless steel, nominal capacity: 4000l/h, membrane modules: 24, membrane area: 12.5m²/module, total membrane area: approx. 300m², pore size: 0.2µm, max. operating temperature: 95°C, operating pressure: 3bar, connected load: 35kVA, control system: Siemens SIMATIC S7-300. The pneumatic valve islands were replaced in 2023. Documentation available. An on-site inspection is possible.

An industrial Sartorius crossflow membrane filtration system is available. Membrane modules: 6, Membrane age: approx. 3.5 years, Filtration capacity range (white wine): 5000l-6000l/h, Machine dimensions X/Y/Z: approx. 2400mm/1300mm/2150mm. Documentation available. An on-site inspection is possible.

Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc.

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Auction-ID: A1-48474-53

Equipped with feed conveyor with stop, 1x length approximately: 2200 mm, Auction-ID: A1-48474-41

Technical data for the shelving truss: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 750x Shelf crossbar, used Suitable for: Grating floors Material colour: sendzimir galvanised Clear width: approx. 1,270 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg Weight | Package: approx. 630 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data for the shelving truss: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 01x Shelf crossbar, used Suitable for: Grating floors Material colour: sendzimir galvanised Clear width: approx. 1,270 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the sturdy milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: Working width: approx. 1,000 mm Spindle diameter: 40 mm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

table length: 700 mm table width: 400 mm x-travel: 450 mm y-travel: ? mm total power requirement: 0 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,210,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Self-leveling cross laser. Designed to project slanted diagonal lines at any angle, thanks to the locking function. Auction-ID: A7-49495-167

Self-leveling cross laser. Designed to project slanted diagonal lines at any angle, thanks to the locking function. Auction-ID: A7-49495-67

Self-leveling cross laser. Designed to project slanted diagonal lines at any angle, thanks to the locking function. Auction-ID: A7-49495-267

Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 – 6,300 mm Input thickness: 12 – 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany

X travel 230 mm, Y travel 150 mm, accuracy 0.02 mm, delivered in original packaging Auction-ID: A1-48552-14

Features: Front fog lights Electrically adjustable windows and mirrors Infotainment system Air conditioning Cruise control Steering wheel controls Smartphone wireless charging Parking sensors Upholstered upholstery All-season tyres Auction-ID: A1-47414-100

Power 2500w Blade Dia 185 mm Voltage AC220v Max Cutting size 63mm Constant rpm 1900rpm Auction-ID: A1-40304-137

Auction-ID: A1-47442-124

Cross-section milling machine Festo Universal profiling cutter Type: UP 65 Milling finger tines and finger joints Cross-profiling in endless cycle succession Milling depth maximum 65 mm Maximum working height 100 mm Tool clamping width 200 mm Support table length x width 657 mm x 272 mm Motor power 7.5 kW Speed of the milling spindle 4,300 rpm Tool flight circle maximum 250 mm Milling spindle diameter 40 mm Cutting speed 56 m/sec. Working cycles maximum 8 per minute Air consumption per work stroke 14 NI (standard liters) Cutting cross-section per stroke maximum 60 cm² Air requirement 20 m³/min. Extraction connection 1 x 250 mm x 140 mm, 1 x 120 mm diameter Speed of table movement up and down can be regulated Weight: 300 kg L x W x H : 850 mm x 700 mm x 1,170 mm

Including roller conveyor, length 3000 mm. Auction-ID: A1-48474-55

Equipped with roller conveyor, 1x length 4500 mm, with stop, 1x 1750 mm, pneumatic clamping Auction-ID: A1-48474-98