cross cut saw used for sale

Treif Divider CE in good condition

Polar 137 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term

Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife

(engraving, cutting) S. No.: S36-0685 Equipment / Additional information: With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 CO2 laser power: 80W Working area: 813 x 508 mm Loading area: 890 x 600 mm Max. workpiece height: 210 mm with 1.5-inch, 2.0-inch lens 197.5 mm with 2.0-inch spacer lens, 2.5-inch lens 159 mm with 4.0-inch lens Working table: Multifunctional table concept Rulers in mm or inches Electronic, programmable Z-axis with servo motor Max. process speed: 355 cm/s Max. acceleration: 50 m/s² Motor: Brushless DC servo motor Encoder: Incremental Optical elements: Telescope, lens, and mirror Lenses: 1.5-inch, 2.0-inch, 2.0-inch spacer lens, 2.5-inch, 4.0-inch Repeatability: +/- 0.015 mm (0.0006 inches), across the entire work area Addressable accuracy: 5 µm (0.0002 inches) Accuracy of Part size: Dependent on material and process Max. l ...

4000w IPG / 3D Head / 8500mm bundle loader / 8500mm single bar loader / 6500mm unloader

Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables

Manufacturer: TRUMPF Model: TruLaser 5030 Classic Year of Manufacture: 2007 Laser Power: 5000 W Operating hours: 55,874 h (of which only 23,565 h were used for cutting) Operation mode: exclusively single-shift operation Maintenance: carried out regularly and exclusively by Trumpf Equipment: includes 2 interchangeable pallets Electrical Specs: - Supply: 400 V / 50 Hz - Connection Load: 105 kVA - Control Voltage: 24 V - Required Fuse Protection: 3 × 160 A Gas Supply Requirements: - Compressed Air: 7–10 bar - Nitrogen (N₂): 30 bar - Oxygen (O₂): 20 bar Find more here - / Contact us at -

Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,

Paper cutting machine Polar 58 EM, machine number 6151039, year of construction 1991, program control, 58 cm working width, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display

Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.

Height=1.36 m, Overall length= 3.38 m, Overall width= 1.84 m, Net weight= 345 kg,

Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 165 kg,

Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 521 kg,

Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 302 kg,

Height=1.569 m, Overall length= 2.56 m, Overall width= 0.897 m, Net weight= 584 kg,

Height=1.4 m, Overall length= 1.88 m, Overall width= 0.81 m, Net weight= 221 kg,

Height=1.64 m, Overall length= 0.99 m, Overall width= 0.87 m, Net weight= 303 kg,

Height=1.275 m, Overall length= 0.99 m, Overall width= 0.75 m, Net weight= 90 kg,

Voor een Afrikaanse klant hebben we een afrol- en op maat snijlijn opgeknapt en uitgerust met een eenvoudige, gebruiksvriendelijke Elgo-bediening.

#6539 Polar 78 ED Age: 2002 Available: Immediately - Air table - Steal side table left side / Reposal table right side

Height=1.6 m, Overall length= 0.7 m, Overall width= 0.9 m, Net weight= 217 kg,

Height=1.23 m, Overall length= 0.35 m, Overall width= 0.55 m, Net weight= 60 kg,

Height=1.53 m, Overall length= 1.17 m, Overall width= 1.37 m, Net weight= 470 kg,

Height=2.09 m, Overall length= 1.08 m, Overall width= 2.25 m, Net weight= 1610 kg,

Height=1.82 m, Overall length= 0.91 m, Overall width= 1.48 m, Net weight= 365 kg,

Bread slicer MHS creel BM 45 N Creel cutting machine floor model Model: MHS BM 45 N with crumb drawer at the bottom Machine mobile Connection 220V Used machine cleaned Option: Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning

Key data: 165 mm, 330 mm, 2800 U/min

WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

- Color Monitor - TouchScreen - Program - Air table - Resopal side tables with air - Spare knife

Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

Blackfriars Rotary Cutter / Granulator Model 12 ASHD/267 With sound booth

Flame and plasma cutting machine Bach Thermocut BJ 2008

M. No.: 6541110 Format (cm): 137 Equipment / Additional information: Side tables, air table, safety barriers, 1xreserve knife PALLET LIFTER VIBRO TABLE RAB5 WITH INTEGRATED SCALE (M. No.: 6581211 // Age: 1995) UNLOADER TR 1ER 145-4 (M. No.: 6591126 // Age: 1995)

Travel: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. dimensions sheet metal (mm) 3048×1524 Control: Sinumerik 840D SL Power of laser: 2000W Max. sheet thickness: steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm with loading and unloading system for the sheet metal

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Inv. Num. : 8712 Type: RUR 2500 GP Producer: Pierce Created: 2007 Parameters: Work table length: 6000 mm Work table width: 2000 mm Track size: 8000 x 2500 mm Plasma Source: Cebora CP200 Autogenous: Harris Maximum sheet thickness (plasma): 20 mm Maximum sheet thickness (oxy-fuel): 200 mm Positioning speed: 12000 mm/min Equipment: Wrykrys Program Nesting USB stick

Used industrial sheet-fed rotary die-cutting machine, max. sheet format 915 x 640 mm and punching format 915 x 640 mm Suitable Applications: - Blister cards - Labels - In-Mould-Labelling (IML) - Large hole labels - Thin film foils - folding boxes - kiss-cut cards and transfer labels Upgrade Recommendation - IMA Double side label bundling machine

Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)

cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany

Mazzoni high-performance guillotine type cutter with its own conveyor Dimensions: Mouth width 550 mm Conveyor width 1000 mm Conveyor belt width 600 mm Total length 3000 mm

Ref. No. 00891 Name of the Tube Laser Cutting System Manufacturer: BLM Adige Model LT 652/B Year of construction 2002 Laser power 2000 watts Loading length Unloading length Loading length 6500mm and unloading length 3500mm. In 2024, 40,000 euros were invested Operating hours 3 shifts Computer 127,653h Heating HF tube 62.850 h High voltage 119,453 h From order confirmation at the time of purchase Lasertube LT652 Automatic feeder for pipes between 3200 and 6500mm Fully automatic pipe support and unloading device for pipes up to 4500mm Siemens Sinumerik 840D control system Teleservice incl. modem CO2-Slab-Laser Model DC020 Kompakt, Fabr. Rofin Sinar Hamburg Integration RF DC020 Compact Laser Cooling Unit Fine dust filter, Fabr. Donaldson Torit Universal AK-HP Cutting Head, Fabr. Precitec Gaggenau Precitec Interchangeable Cassettes AK-HP 5" HP ZNSE 5"  ...

Manufacturer: Messer Griesheim Model: Lasermat 4200 Year of Manufacture: 2011 Type of Machine: Laser Cutting Machine Find more here - / Contact us at -