cross cut saw used for sale

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

Seydelmann K40 Bowl cutter 2008, Stainless bowl cutter, three blade assembly, variable speed, timer and temperature controls, 3Ph

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

On frame. Width 115 cm

Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

48× HSK-A63 Tool Holders   mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled.   The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included.

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

Grinder mill with blades, cutting chamber: 1000x900 mm, motor: 55 Kw (75 hp), open rotor, 4 rows of blades on the rotor, 3 side rows, scissor cutting. With electrical panel.

Works flawlessly With large and small machine vise with threading devices With foot pedal With lighting With attacks Loading 100 EUR

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

6000w TruDisc 3000 x 1500mm Big specification

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box

Bowl cutter Kramer+Grebe SM 80 Overhauled Technical data overall dimensions 2000x1150x1800 mm; bowl 80 ltr; power supply 400 V, 50 Hz; power: main motor 15/20 kW; bowl motor 1,1/1,4 kW; mixing motor 1,3/1,8 kW; unloader motor 0,75 kW; 2 knives speeds 1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; weight 1500 kg

Compex brand grinding mill with blades, cutting chamber: 400x400 mm. Open rotor, 5 rows of blades. Engine: 25 hp (18.5 KW) and electrical panel. Vacuum cleaner and cyclone with Big Bag support.

Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box

still worked with it in 2026. perfect machine for clothing and shoe industry of a solidity and simplicity that was only made in the past

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): No; Maximum cutting thickness 45mm; Unused in box

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Rondo Doge Cutting Table Year of construction 2002 63cm bandwidth completely stainless steel with calibration head attached Cutting frame with protective grille with bracket for 2 rollers with attached filler#ät with 2 Tichter with adjustable guillotine Speed adjustable Band height 90cm

Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).

Equipped with input power: 7.6 kVA; input voltage 1-phase 230 V AC 50 Hz; duty cycle 45%; protection class: IP21S; Max cutting thickness: 12mm steel; Unused in box

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...

" Bundle of used cutting tools and accessories from the workshop inventory. The item includes, among other things: • Various end mills (e.g. coated/uncoated, different diameters) • Disc milling cutters / angle milling cutters (multi-edged) • Tool holders and adapters • DIN 2187 extension sleeves, including MK 3 to MK 2 (original packaging partially available) • Other milling cutters and accessories Weight • Net weight: 13 kg "

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box