126,718 used machines on RESALE, but how to find them? Machine Search
Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W 4200 x H 16 ...
Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5) Auction-ID: A1-45681-847
Scope of delivery: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Auction-ID: A1-45681-736
Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Auction-ID: A1-45681-829
An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.
Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.
Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm
Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station
Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor
Key data: 230 mm
suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece
TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%
Casolin sliding table machine mod. Used Astra DGT with digital parallel guide control Carriage mm 3200 with sliding on 8 rollers Blade diameter max mm. 400 Engraver with independent motor and electro-pneumatic start-up intervention Maximum opening parallel guide mm 1300 with controlled axis Automatic star/delta blade motor start Installed power 4.5 Kw Possibility of removing the parallel guide by unscrewing a single knob Parallelogram protection rotation for passage of tall workpieces Year of manufacture 2004 CE compliant
Key data: 45 °, 3000 mm, 1100 mm
MARTIN T74 Classic YOC 2007 Main sawing unit: 5.5 kW Rated current: 22 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 – 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Rip fence can be lowered manually max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor 5.7" touchscreen control Digtial length stop Parallelogram cross table with digital display Main Saw Blade Change: ProLock Central lubrication Compressed air supply required Operating hours read: 596 h Extraction connection: 120 + 100 mm Weight: approx. 1900 kg
Pull, cross-cut and mitre saw FESTOOL KS 120 EB year 2011, blade ø 260/30 mm, S/N 10763964, 1,600 W, w. 2 roller raceways metal, each approx. 160x45 cm, roller block
Double mitre saw HAFFNER DGS 188 built in 2011, blade ø approx. 400 mm, machine length approx. 600 cm, 400 V, max. 6 bar, S/N 11003
Vertical panel saw HOLZ-HER 1270 Automatic built in 1987, machine no. 262/8-75, machine width approx. 500x210h cm
Wooden band saw HOLZMANN HBS 470, S/N 11105Q0055, passage width approx. 47 cm, passage height approx. 35 cm, table dimensions approx. 55x55 cm
Mobile circular saw MAFELL Erika 60 E built in 2011, 1,300 W, S/N 0988734
Sliding table saw ALTENDORF F45 EvoDrive year 2023, blade max. 450 mm, 7,208 kVA 400 V, S/N 230112016, digital display, control ALTENDORF, double mitre gauge Altendorf Duplex
Circular saw blades div. approx. 30 packs, partly used, partly as good as new, partly sharpened, partly unsharpened, w. wooden shelf
Band saw METABO BAS 505 Precision WNB, No. 7115510655, 230 V, built in 2017, table size approx. 536 x 640 mm, cutting height 280 mm, total height on pallet approx. 200 cm
A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Cutting stroke 500 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-15
Qty 2. Weights and dimensions per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-78
Qty 2. Weights and dimensions per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-77
Qty 2. Weights and dimensions per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-76
CIRCULAR SAW - MEP COBRA - N° 017048 NTR SERIES FOR ALUMINIUM Auction-ID: A1-45663-22
Qty 2. Weights and dimensions per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-79
Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-32
Qty 2. Weights and dimensions per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-81
HORIZONTAL BAND SAW KASTO SBL 280 U FROM 1996 - METALWORKING MACHINE - SERIAL NUMBER 6003102458 WITH DOCUMENTATION Auction-ID: A1-45663-3
Qty 2. Weights and dimensions per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-80
OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export
Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg
saw blade diameter: 400 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: flat: mm turning speeds: 1400 / 2800 U/min engine output: 4,0 kW weight of the machine ca.: 180 Kg dimensions: 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Excellent condition - Fully operational - Loading / Transport possible! hood for miter cuts, 2cnd longitudinal fence and hold-down
Excellent condition - Fully operational - Loading / Transport possible! Cutting length approx. 3200 mm, program slide travel max. approx. 2500 mm, with 5 stops, angular back fixture, cutting height approx. 50 mm, diameter main saw blade approx. 300 mm, scoring saw blade approx. 150 mm, motor main saw 5,5 kW, scoring saw 0,55 kW, saw carriage feed approx. 6 to 32 m/min, return approx. 32 m/min, slide approx. 0,8 m/min and 14 m/min, control TRIA 460, 3 air cushion tables approx. 1830 x 610 mm, length stop at the 1. air cushion table.
Excellent condition - Fully operational - Loading / Transport possible! saw blade diameter max 500 mm speeds 2000 to 6000 1/min cutting length 5,000 mm guide slot width of the riving knife 13 mm voltage 400 V current 35 A frequency 50 Hz main motor make ATB type YAF 112 M/21-11 power 5.5 kW digital length stop scoring saw saw blade diameter 120 mm diameter of the tool holder 22 mm scoring motor make ATB type MAF 80/2 A-11 power 0.75 kW , 8200 1/min includes vacuum table and 2 pcs. Laser splitting wedge Altendorf 3 pcs insertion protection Altendorf Leitz throat milling disc
Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.
Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.
Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile
Excellent condition - Fully operational - Loading / Transport possible! cutting length: 4300 mm cutting depth: 4250 mm Saw Blade Protection: 80 mm clamps piece: 6 (75 / 275 / 475 / 1050 / 1850 / 3450) piece Main saw blade: 350 mm Scoring Saw Blade: 180 mm saw carriage speed forward: 1 - 150 m/min saw carriage speed reverse: 150 m/min program fence speed forward: 90 (EU max 25) m/min Program Fence Speed Reverse: 90 m/min Air table: 4 x (2240 x 770 mm) Main motor: 13.5 kW scoring saw: 2.2 kW control: PLC software: CADMATIC 4.1 PROFESSIONAL total power approx: 20 KW
maximum number of results exceeded
please refine your search
149 € 
