cross cut saw used for sale

Cutting height 90 246 mm Cutting height 45 165 mm Cutting height 30 113 mm Fuse 32A Speed 3000 rpm Saw blade D650 mm

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

General Manufacturer: MEP Type: Cobra 352 NC 5.0 Year of Make: 2017 Control: Volution TS50 Cutting speed: 1,700 / 3,400 rpm Saw blade diameter: 350 mm Cutting performance Round tube: 120 mm Square tube: 105 / 100 mm Rectangular tube: 180×70 / 135×60 mm Solid material round: 50 mm Solid material square: 80 / 55 mm Solid material rectangular: 160×35 mm Dimensions and weight Dimensions: 1,750 mm x 2,360 mm x 1,700 mm Weight: approx. 600 kg Condition Condition: Used Functional: Tested and fully functional

miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 2200 mm

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm 2 saw motors Motor power 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2500 mm 2 front stop rails 1 piece length 1200 mm, 1 piece length 2400 mm With extraction connection and pipe Including 10 saw blades with a diameter of 400 mm Weight approx. 1300 kg Shipping Dimensions 3900 mm x 1300 mm x H 1200 mm

ID3689 Benetti VIP916 year/Baujahr 2020 Wire saw Wire Saw

Key data: 380 mm

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

A semi-automatic horizontal bandsaw Knuth is available. Miter range: 0°-60°, min. cutting range: 25mm, max. cutting diameter: 325mm, max. cutting diameter X/Y: 400mm/315mm, saw band speed: 100m/min, saw band dimensions X/Y/Z: 4380mm/34mm/1.1mm. Machine dimensions X/Y/Z: approx. 2150mm/2150mm/1650mm, weight: approx. 1800kg. An on-site inspection is possible.

Key data: 500 mm

Aluminium circular saw, semi-automatic aluminium underfloor circular saw for mitre cuts 0 to 67.5 degrees to the left and right - Machine with solid cast construction - Large solid rotary table - 7 main angles with fixed stops - Mitre 0 to 67.5 degrees left and right - 2 pneumatic vertical and horizontal vises - Two-hand safety control - Infinitely adjustable saw blade feed Great condition, machine hardly used. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Saw blade: 500 mm Colour: blue/yellow Total power requirement: 380 V Weight: 550 kg Dimensions: 1140 x 1150 x 1740 mm Speed min./max.: 2860 Cutting area at 90 degrees square 160 x 160 mm Cutting area at 90 degrees rectangular 260 x 100 mm Cutting area at 45 degrees square 145 x 145 mm Cutting area at 45 degrees rectangular 185 x 100 mm Angle a ...

A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

CANALI log band saw system model BBS. V - PACIFIC - 1800 Type 555 Refurbished 2024 CANALI pneumatic clamping carriage with 4 clamping claws, speed 6-120 m/min., 100 kW 3 log turners, 4 ejectors, cutting thickness adjustment 150 mm/sec. Log feeding station with insert, hole pull with model cross conveyor complete sharpening room equipment Iseli stellitizing machine SAA, Iseli leveling machine EBW-E, rolling machine with straightening bench, Band saw sharpening machine and leveling machine Electrical cabinets and control panels, control cabs Refurbished 2024

A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.

Offer 26002 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds + 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Hydr . Metal Clamping - Coolant device - Feed – roller conveyor approx. 3000 mm - Discharge – roller conveyor with measuring stop approx. 4000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Casolin sliding table machine mod. Used ASTRA SE 400 sliding carriage on hardened guides of round section carriage length mm. 3200 width mm. 400 scoring unit scoring blade mm. 120 5.5 Hp engine max blade diameter mm. 400 CE

Heavy Duty Semi-Automatic Vertical Panel Saw Wood Her Supercut 1216 Cutting area 5300 x 2200 mm Cutting depth max. 80 mm Swivelling control panel Central display for horizontal and vertical cutting pneum. Lifting and lowering the transport rollers pneum. Latching during vertical cutting pneum. Horizontal cut locking pneum. Immersion of the sawing unit Interface extraction Saw motor 5.5 kW CE version Machine is FUNCTIONAL in VERY GOOD CONDITION From stock Lieboch 

Panel saw SCM mod. SIGMA 65 - CE rules - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm - N. 6 clamps - Saw carriage speed: 12m/min - Main blade diameter: 300mm - shaft diameter 80mm - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 - S/N AE/22614 - Year 2001

saw blade diameter: 450 mm capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 210 x 170 mm capacity 45 degrees: square: 145 x 170 mm turning speeds: 2900 U/min total power requirement: 2,3 kW weight of the machine ca.: 600 Kg dimensions: 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.

This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information.

This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information.

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.

This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine.

This Behringer HBE 511 A was manufactured in 2018. Ideal for precision metal cutting, this Metal Band Saw features a robust design and is well-suited for a variety of metalworking applications. Consider the opportunity to buy this Behringer HBE 511 A Metal Band Saw. Contact us for more information.

This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine.

This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. Its mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information.

This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information.

This 3-axis SELCO WN750 panel saw was manufactured in 2009. It is designed for efficient and precise cutting of panels. Consider the opportunity to buy this SELCO WN750 panel saw. Contact us for more information.

This panel saw was manufactured in 2000. Consider the opportunity to buy this GIBEN panel saw. Contact us for more information.

This Paul Reinhardt K34G / 1500 panel saw was manufactured in 1995. It features a multi-blade saw with a feeding and stacking system, ideal for efficient panel cutting operations. Contact us for more information.

This Martin T72 table saw was manufactured in 1989. Ideal for woodworking, it offers reliable performance for precision cutting. Consider the opportunity to buy this Martin T72 table saw. Contact us for more information.

mitre joint cuts -/+ degrees: 90 : ja : 250 weight: 400 kg Dimensions (L/W/H): 1500 x 1000 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 400 kg : ja Dimensions (L/W/H): 1600 x 800 x 1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja miter: 1500 mm : 230 mm weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed -  ...

Table dimensions X/Y: 2000mm/1750mm, cutting range: 0mm-305mm, max. blade guide height: 300mm, saw blade length: 4920mm. On-site inspection is possible.

Cutting length: 4300mm, cutting height: 2200mm, cutting depth: 80mm, saw blade diameter: 30mm, bore: 30mm, speed: 4000rpm, machine dimensions X/Y/Z: approx. 5400mm/2900mm/1700mm, weight: approx. 1100kg. On site inspection is possible.

Sharpening machine Vollmer For circular saw blades Type CHC 25 H Year of manufacture 1985 Automatic sharpening machine for breast, back and free grinding Carbide-tipped circular saw blades Circular saws Outer diameter from 80 mm to 810 mm Bore diameters from 10 mm to 220 mm Blade thickness up to 5 mm Tooth pitch from 7 to 100 mm Rake angle from 6° to 45° Bevel grinding of tooth backs up to 45° Tooth breast up to 15° Grinding speed infinitely variable from 0.5 to 6 mm/s Working speed up to 18 teeth Grinding wheel diameter 125 mm Bore diameter 32 mm Circumferential speed 26 m/s Coolant pump flow rate 40 l/min. Connected load approx. 1.6 kW Areas of application Flat tooth at an angle on one side, left and right Interchangeable tooth, roof tooth, trapezoidal flat tooth, group tooth, Uneven tooth pitch, omitted teeth, format chipper saws Weight approx. 680  ...

Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed

CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)

A glass glazing bead saw Elumatec is available. Saw blade diameter: 400mm, max. speed: 3800rpm, machine dimensions X/Y/Z: approx. 1250mm/650mm/800mm, weight: approx. 250kg. Including roller conveyors. Dokumentation vorhanden. An on site inspection is possible.

Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer

Sliding table length: 2800mm, Cutting width: 1000mm, Saw blade tilting: 45°, Saw blade diameter min./max.: 250mm/450mm, Motor power: 5.5kW, Weight: approx. 1250kg. An on-site inspection is possible.

This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine.

This panel saw was manufactured in 2011. It features a maximum panel width of 4500 mm and length of 2200 mm, with a saw blade projection of 127 mm. It includes a lifting table, 9 grippers on the sliding stop, and flexible grippers for NC positioning. The saw unit supports a tool diameter up to 470 mm and operates with a motor power of 18.5 KW. Consider the opportunity to buy this SELCO WNTR 730 panel saw. Contact us for more information.

Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg