cross cut saw used for sale

Key data: 3220 mm, 1550 mm

HARWI 1550 Giraffe Vertical Panel Saw Brand: Harwi Type: Giraffe 1550 Year: 1995 M-Nr: 5000 CK Max. cutting width: 1,550 mm Max. cutting length: 3,200 mm Max. cutting depth: 50 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 2.2 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Open back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 4.300 x 1.910 x 1.250 m Weight: 495 KG

Key data: 4300 mm, 1850 mm

HARWI 1850 Giraffe Vertical Panel Saw Brand: Harwi Type: 1850 Giraffe M-No.: 5008KM Year of Make: 2003 Max. cutting width: 1,850 mm Max. cutting length: 4,300 mm Max. cutting depth: 55 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 3.0 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Closed back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 5,200 x 1,300 x 2,700 mm Weight: 570 KG

Bauer 300 mm

Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scorin ...

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of Make: 2017 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

Type MJ900-X3 Spindle diameter 74 mm Diameter of sawblades 205 mm Cutting width 900 mm Cutting thickness 5-25 mm Speed 2600 rpm Motor power 15 kW Feed speed 0-12 m/min. Feeding motor 1,5 kW Transport dimensions 2100x1400x1350 mm Weight 1700 kg Delivery term: ~ 3 months.

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

HOLZMA HCV 11 Angle Center Double Angle Panel Saw Cutting length 4.300 mm Bevel cutting length 2,200 mm Lift width 2,200 mm Number of Grub Teeth 13 Feed rate max 125 m/min Stepless feed Saw Table Top Allowance 125 mm Saw top diameter max 450 mm Main motor 18 kW Undercutter Yes Postforming scoring machine Loading with vakkum jack Feed table rear Yes Turntable in machine table For delicate items Yes Left Stop Page HOLZMA Central pressure device for angle setting Waste flap HOLZMA Electromagnetic Measurement System HOLZMA Power-Lock HOLZMA Soft-/ Postforming VVSH HOLZMA Integrated Face Cutting HOLZMA Two-finger clamp HOLZMA CADMATIC control Other offers - click - Gabiani Biesse Giben Panhans Schelling Meyer Holz-Her Scm Holzma Rema Scheer panel saw loading panel cutting table saw sheet package sheet machining center plate machining center nesting automatic efficie ...

Stanko Ø 400 mm

Cutting and miter saw • Saw blade diameter: 420 mm • Saw blade holder: 40 mm • Cutting length: 410 mm (at 90°) • Cutting height: 170 mm (at 90°) • Machine can be swivelled on both sides via hand crank (from 90° to left by 45° and from 90° to right by 30° to max. 60°) • HM circular saw blade for wood (420 x 3.4/2.4 x 40 mm 48 WZ neg) • stable cast iron construction • Precise ball bush guidance of the tool slide on hardened and ground steel shafts • Saw feed manually • Miter range horizontal: 45° - 90° - 25° • Miter range vertical: 90° to 45° (left) • re-adjustable fixed stops • Lower saw blade protection can be connected to a suction system (diameter suction nozzle = 100 mm) • incl. machine stand for type 170 N • Weight: 120 kg Engine data: • Power: 3 kW • Speed: 2710 rpm • Voltage: 400/230 V • Rated current: 6.4 ...

Key data: 280 mm

Ref.nr 00898 Name of the system: Used band saw Manufacturer: Bauer HS 280 GZA: For automatic sawing of small diameter ranges, universal application by the miter device, hydraulic material feed. Model HS 280 GZA Year of construction 2012 Technical data: (according to data sheet) Automatic saw design Cutting range 90° Round Diameter 280mm 90° Flat 300 x 230mm 45° Flat 220x230mm 30° Flat 130x170mm Cutting angle 0-30° Saw motor 1,100/1,400 Saw Blade 3000x27x0.9mm Belt speed 1: min 30m/min 2: max. 60m/min Coolant Pump 90W Hydraulic Pump 370W Mains connection 400V / 50-60 Hz Clamping force adjustment infinitely variable 10-40 bar Stroke length 500mm Working height / infeed height 500mm Dimensions (L x W x H) 1700 x 2100 x 1400mm Weight 1100 kg Scope of delivery / standard equipment Completely ready for connection, machine stand with chip collectio ...

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

1. Dear Ladies and Gentlemen, I refer to your mail to Mr. Schmidt and send you information about the sawmill for sale as requested. I would like to sell the system completely to a buyer and then agree on a package price for the following parts of the system after viewing. The plant is located at the site and is still fully connected. It consists of: 2. 1. Log feeding (cross conveyor, EWD step pusher, block hoist with 2 ejectors) 2. Creel system, Esterer HD 30, with splitting wedge (Arta), outfeed roller conveyor with liftable cross conveyor, and roller conveyors for recutting with lifting cross conveyor to the Costa plant 3. Separation step to the Costa feeding, with infeed roller conveyor to the Costa Mamut cross-cut saw, incl. metal detector 4. Costa Mamut model cross-cut saw, for cutting from 800 to 3000 m, with transfer to Costa double shaft saw "Leone"  ...

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

For sale is a complete, well-maintained used sawmill plant with EWD sawing line, consisting of modern components for log processing, sorting and disposal. The facility has been regularly serviced and is in excellent condition. Part of the line is still in operation and can be visited by appointment. Available from approx. June 2026. System components at a glance: Log yard: Sorting, surveying and debarking plant, SPRINGER, built in 2017 Nicholson debarking machine, built in 1992 Microtec surveying system, built in 2015 30 sorting boxes Cross-cut plant, built in 2017 Sawing line – EWD: Twin-shaft circular saw DWK 700, built in 1999 Profile chipper PF 19-3SP/V, year of manufacture 2003 Resawing circular saw BNK 225/6, built in 2003 Complete mechanization and control Edger EWD Optimes BK-100B Sawn timber sorting and ancillary facilities: 7 sort ...

Key data: 4200 mm, 115 mm

Panel Saw with Lift Table Loading Scheer Type: PA 7004 Year of Make: 1999 CE with automatic lift table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, Linux operating system with PA software S5 Cutting length 4200 mm Travel of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade protrusion 135 mm Panel Saw Size FM22 Main saw blade diameter maximum 450 mm Scoring saw blade diameter maximum 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher 30 m/min in the flow, 70 m/min in the return. Remaining section device SP5004 Saw motor 11 kW, scoring 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lift table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front Air Cushion Support Tabl ...

Key data: 6500 mm, 100 mm

Horizontal panel sizing saw Longitudinal saw with 6,500mm cutting length Panel dimension 6,300mm Main saw motor 35KKW frequency-controlled Feed speed saw carriage 5-80m/min. Max. saw blade diameter 550mm with 130mm protrusion Saw blade deviation sensor Cut-gap closers Pressure device 2,600 - 100mm Material tray 6,300mm Extension to 10,900mm 9 Parcel jammers 4 Cross aligners Pressing device 100- 2,600mm, approx. 2,000mm behind the cutting line Pressing device 100- 2,600mm, approx. 4,000mm behind the cutting line Electronic Control PC6200 Machine Tables Air Cushions with Steel Nozzles 1 angle table 2,600x1,000mm with angle stop rail 4 side table 2.600x800mm More information on request!

M.Nr. AE/030883 Year of Make: 2007 Motor data: 380 V - 50 Hz - 38 A Type: SEZ. MON. E Cutting dimensions: 3200 mm x 3200 mm Scoring Weight approx.: 2400 kg Equipment: 1 x Front fixed table with guide 1500×600 mm, air cushion 2 x Front fixed table 1500×400 mm, air cushion Automatic switching off of the scoring saw blade Main saw blade motor 7.5 kW (10 hp) Star-delta start-up for main saw blade motor Groove design with manual adjustment of the main saw blade 3D simulator on the machine Graphical editor Cutty – Cut Optimization Software PC Machine feet / pedestals Electrical equipment A.E.V400/50 "N" with microswitch, scoring cut-off, 0YD, grooves

Pendulum circular saw Irion Cutting width 350 mm Roller table 3000 mm L x W x H: 600 x 500 x 1800 mm Weight approx. 250 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Part Number: 7807 SPECIFICATIONS - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table top dimensions 1900x790mm - height from the base to the tabletop 830mm -in advance - 2 rows of ratchets/fluffers - 2 Slip Rollers, Smooth, Metal - shaft with saws - 2 sliding rollers, pressure – from below - guide strip - Ratchets/Fluffers -caterpillar - Electric body height adjustment - central lubrication - Infinitely variable speed control on the inverter - 4kW feed motor - main motor 75kW - Diameter of the extraction port 2x150mm - overall dimensions l/w/h 2050x1800x1800mm - weight about 3500kg ADVANTAGES – German production – DTR documentation – used multi-saw – very good condition Net price: 58900 PLN Net price: 14024 EUR depending on the price 4.20 EUR  ...

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Part Number: 7805 SPECIFICATIONS - track width 340mm - shaft width 340mm - blade hole diameter 80mm - 350mm discs on the upper shaft - mounted discs on the lower shaft 300mm - max cutting height 200mm - min length of the processed material 700mm –in advance - 2 rows of flingers - smooth, slippery, pressure shaft - Flingers - 2 slip shafts, smooth, pressure shafts - shaft with saws - 3 pressure rollers, smooth – from below -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed regulation - main motors 2x approx. 55kW - 3kW feed motor - Electric body up/down lifting - manual adjustment of shafts with saws - central lubrication - Extraction port diameter 2x200mm - dimensions l/w/h 2700x1800x2150mm - weight about 5000kg ADVANTAGES – German production – twin-shaft – 2x55kW motor – used multi-saw, very goo ...

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

Part Number: 7804 SPECIFICATIONS - track width 350mm - shaft width 330mm - 300mm disc fitted - max blade diameter 400mm - blade bore diameter 70mm - max cutting height at the blade 400mm, 150mm - table top dimensions: 2240x770mm –in advance - Flers/ratchets - Slide shaft - Flingers - smooth, sliding roller - shaft with saws - 2 sliding rollers, pressure shafts – from below - roller in front of the countertop -Guide -Triggers -caterpillar - central track lubrication - electric shaft lifting with 0.75kW saws - electric body lifting 0.75kW - infinitely variable feed speed regulation - Diameter of the extraction port 320mm - main motor 45kW - overall dimensions l/w/h 2280x1820x2040mm - weight 2850kg ADVANTAGES – Czech production – used multi-saw – DTR documentation – very good condition Net price: 62900 PLN Net price: 149 ...

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Double Mitre Saw Manufacturer: Duespohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°

Part Number: 7806 SPECIFICATIONS - track width 300mm - Shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - blade hole diameter 60mm –in advance - 2 rows of ratchets/fluffers - smooth pressure shaft, sliding - shaft with saws - smooth pressure shaft, sliding – from below -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - main motor 22.37kW - central lubrication - table top dimensions l/width 1430x700mm - Diameter of the extraction port 150mm - dimensions l/w/h 2100x1450x1400mm - weight 1311kg ADVANTAGES – Italian production – very good condition – used multi-saw Net price: 29900 PLN Net price: 7119 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

JRIMAC Circular Saw/Multifunction Saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left – right/ right – left - Flexible and rational working - Air cushion table for pleasant processing of sheet goods - 90° – Stop ruler for cross-cut cuts - Collets for optimal processing of sheet material - Force-guided pneumatic hold-down device with zero-cutting device - Various options for incision initiation - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade – quick clamping system "JRIMAC" - High level of occupational safety -Friendly - Cutting accuracy +/- 0.5 mm

The Sulak PTS325F is a powerful vertical saw designed for cutting laminated glass and other specialty glass types. Here are the key specifications and features: Technical Specifications Maximum glass thickness : up to 60 mm Cutting types : o Normal glass o Laminated glass o Fire-resistant glass o Bulletproof glass o Cutting angle : o Straight cut (90°) o Fixed angle of 45° via simple mechanical switching o Cutting direction : Vertical from top to bottom o Cutting speed : Adjustable via frequency converter ( 0.1 – 1.6 m/min ) o Cooling system : Closed circuit with tank, water pump, nozzles and collection system Dimensions : approx. 3650 × 1900 × 4600 mm o Power supply : 3×400 V (or 3×230 V), 50/60 Hz o Power : 3.3 kW o Weight : approx. 1110 kg o Noise level : 78 dB o Saw blade diameter : 350 mm or 400 mm Maximum cutting lengt ...

CML 2-blade mobile multi-blade rip saw model SCA320 2R T350 , with separation line and return of pieces to the operator: – machine management from a separate control panel, with: CNI electronic programmer 2 joysticks for managing the 2 units with moving blade Variable feed speed (inverter), with digital display motorized positioning of the blade unit, with digital display Motorized positioning of the presser, with digital display Motorized positioning of the machine infeed guide – 1 fixed blade + 2 mobile recirculating blades – 1 fixed laser + 2 mobile lasers, for cutting lines – 350mm belt, 320mm useful cutting width – blade diameter from 220 to 350/360mm max – useful cutting height with 360mm mobile blades: 100mm – useful cutting height with 350mm movable blades: 95mm – useful cutting height with fixed sleeve and 350mm blades: 120mm – blade moto ...

Circular saw sharpening machine Vollmer Cne

Hand cabinets for gate saws Tsa

Full gate Esterer SS45 was generalueberholt Pass 450 mm 340 upm 500 Hub with complete hanging, saegen blaetters and Templates with hydraulic roller lifting with wedge wedge with drive power 30 kW with hydraulic unit with complete control cabinet

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

Band saw Saw machine Brand: HESKA Type: ESU-H63 S/N 793322 Infinitely adjustable 16-3200 m/min Hydraulic feed table with approx. 410 mm stroke, to the right approx. 45° and to the left approx. 15° inclined Band length: 4700 mm Operating instructions are available. Sold only to commercial enterprises! All information without guarantee

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

Table circular saw Schelling SKR with SUVA protection with stop Bösch L x W x H: 2200 x 1800 x 1100 mm Weight approx. 750 kg Built in 1973 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 430 mm, 5200 mm

Band saw machine Bauer SA 430 ZA with accessories Year of construction 2009 Serial number 09-98002 Space requirements: Dimension L 3110 mm W: 2210 mm H 2400mm Total machine weight approx. 2,500 kg Electr. Connection 400V Motor power 4 KW Coolant pump yes Hydraulic pump yes Sawing area: 430mm Saw blade dimensions 5200 x 43 x 1.3 mm Cutting speed: Infinitely variable Saw blade guide: deflection rollers and carbide jaws Material tension: hydraulic Saw frame stroke: hydr. Cutting pressure control Material feed: manual, hydr, automatic pliers Accessories: roller belt, chip conveyor, express lowering, preselection of cutting pressure and force via touchscreen on the control panel, storage for cut parts, saw blades >5 pieces, SIGMA 5200x43x1.3 mm available Ready to use.

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

Abbund Chain Saw Sauer ZKS 2033 Sword length 330 mm a replacement chain plus chain wrench available Built in 2008 This blow chain saw was little used and looks almost like new. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Code: 0301 Brand: PAOLONI Model: P45 - CEStandard Panel saw with tilting blade and scoring unit for panels, furniture, custom-made furnishings, doors, wooden window frames, composite materials, plastics, and various materials - CE Standard Technical data: Aluminum sliding carriage length 3200 mm Carriage lock in any position Cutting width on parallel guide 1250 mm Max blade diameter 450 mm Hole 30 Cutting height at 90° mm 157 Cutting height at 45° mm 111 Tilting blade unit 0-45° Saw shaft speed rpm 3000/3600/4200 Blade motor power 7,5 Hp Automatic saw unit lift Manual tilt with saw unit handwheel Scoring saw unit: Blade diameter mm 125 - Hole 30 - Scoring motor power Hp 1 - Horizontal and vertical scoring saw adjustment Parallelogram blade guard Eccentric clamping arm Saw blade tilt indicator Weight kg 820

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg