cross cut saw used for sale

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50

Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer)  ...

Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL

Key data: 800 mm

Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...

Dimensions (L/W/H): 3900x2230x3900 mm Weight: 1500 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200

Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - ...

Automatic optimization crosscut saw: Technical data: Follow later!

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm saw blade turning speeds: 5000 U/min Motor output: 2,0 kW machine weight ab.: 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Key data: 500 mm, 125 mm

Safe-Solid-Fast The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2 hand control - Protective shield rigid - 1 meter roller conveyor to the right of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece of pneumatically swivelling stop with 200 mm Length and control switch on the saw frame - 1 piece HM saw blade 500 mm, Z = 108 Technical data: Maximum Cutting Range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW  ...

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

Auction-ID: A1-48430-7

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

Manufacturer: OMGA Type T55 300 Saw heigth: 75mm saw length 135mm Saw: ø300mm Saw spindle: ø30mm Motor: 1.2 kW Toerental 3000 tpm Dust extraction: 80mm incl. fan Condition: Full Functional

Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

Code: 0444 Brand: STROMAB Model: TR 500 MATRIX 4 - CE Standard Automatic cut-off saw equipped with pusher Matrix 4 - with defects removal and 4 optimizing criterials - CE Standard For the sizing and end-trimming of boards, strips, squares of solid wood or timber products Blade diameter 500 mm - Motor Hp 10 – Blade revolutions n° 3000 Cutting dimensions : With thickness 60 mm cutting width mm 360 – With thickness 100 mm cutting width mm 325 – With thickness 115 mm cutting width mm 300 – With thickness 135 mm cutting width mm 250 Worktable height mm 1000 Speed from right to left Electronic programmed pusher Matrix 1 for programmed cutting in sequence Technical data MATRIX: Automatic or semi-automatic cutting cycles Stored cutting cycles 99 Programmable measures for each cycle 15 Useful stroke mt. 7 Positioning speed mt/min 0-40 Max return speed mt/min ...

Cross-cut saw Dewalt 220 V The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

Radial saw MAGH-OMGA RADIAL 700, engine hp 3 , reach 700mm Not to CE standards, for export

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Angle cutting machine

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996