crate used for sale

Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.

Fully Automated Craft Brewery 30hl/brew with Meura Mash Filter This fully automated 30 hl craft brewery, installed in 2015–2017, is in excellent condition and represents high-end European brewing technology. The system is a complete, turnkey solution including all necessary auxiliary equipment. The brewery is still installed and fully operational. The brewhouse has a capacity of 30 hl per brew and is capable of producing approximately 6–8 brews per day. It features a traditional three-vessel configuration equipped with a Meura mash filter for efficient wort separation. The brewery has been used to produce a wide range of both filtered and unfiltered beer styles. The cold block includes 3 × 75 hl fermentation tanks and 2 × bright beer tanks. Additionally, the system is equipped with advanced beer filtration capabilities, including a GEA centrifuge (unitank-compatible), kies ...

Cramer LS 5000 Leaf Vacuum Manufacturer: Cramer Model: LS 5000 Model year: ZIXMM Type: Leaf Vacuum / Leaf Blower Vacuum Weight: 70 kg Speed: 3600 rpm Use: Pick-up and shredding of leaves and light garden waste Features: robust used device with high air flow, mobile and suitable for commercial use Location: Bremen

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Description ELECTRO CRAFT - SERVO MOTORE BRUSHLESS Model: F-4030-Q-H00AA Manufacturer Code: 2142-00-802

Description ELECTRO CRAFT - BRU-200 SERVO DRIVE Model: DM-20 Manufacturer Code: 9101 - 1302

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 6000 mm workpiece weight: 30 t turning speeds: 100 U/min : total power requirement: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 5000 mm workpiece weight: 25 t turning speeds: 0,6-300 U/min : 4-jaw-chuck diameter: 800 mm control: Siemens transmission ratio: 3 total power requirement: 100 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg

Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 500 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates

LENGTH :17200M DOUBLE GIRDER

Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

A Klotzki spiral crate washing machine for open plastic beverage crates is available. Crate dimensions X/Y in longitudinal flow: 400mm/300mm, crate dimensions X/Y: 200mm/300mm, crate height range: 270mm-300mm, conveying direction: cross flow, throughput capacity: 1500-2000crates/h, treatment section: approx. 34m, number of units: 48pieces, material: stainless steel, treatment time at 1700 and 2400crates/h: approx. 91s/65s, crate infeed height: 1100mm, crate outfeed height: 4100mm. Machine dimensions X/Y/Z: approx. 3000mm/2000mm/5000mm, weight: approx. 1500kg, control system: Logo. Without platform. The crate indexing and spraying units may need repair. Documentation available. A visit on site is possible.

Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x649.5 Part 3 Crane 1/2 -Art.No.: 1031 4148 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece -Dimensions: Ø 120 x 649.5 mm -Weight: 35 kg/piece

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: SWF, crane chassis with electric cable winch -Cable pull: Type 50H8d -Load capacity: 10,000 kg -Main stroke: m/min -Drive system: S0.85-4 -Travel speed: m/min -Roller spacing: mm, dimensions see photos -Drum speed: m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1250/1960/H820 mm -Weight: 1320 kg

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist, crane hook crossbeam, load crossbeam -Manufacturer: Seil Becker, crane traverse -Load capacity: 100 kg -Steel rope: Ø 4 mm -Dimensions: 1015/80 / H440 mm -Net weight: 9.2 kg

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Crane cross member claws: 3 pieces -Crane cross beam claws: to move on the cross beam -Traverse support: 220 mm -Price: complete -Dimensions: 335/180/H350 mm -Own weight: 39 kg

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=110x550 -Number: 1x axle available -Dimensions: Ø 110 x 550 mm -Weight: 38.9 kg

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 -Number: 1x axle available -Dimensions: Ø 240 x 545 mm -Weight: 70 kg

This MiDi LS15.17 RD of Euro Crane S.A. (Spain) is a modern and professionally designed mobile trailer crane, built in 2025. The crane is CE marked and equipped with a digital Omron control and load control system that displays the load in kilograms and percentage in real time, contributing to safe and efficient operation on site. The maximum lifting capacity is 1,500 kg, depending on the configuration. With a maximum boom length of 17 meters, the lifting capacity is approximately 510 kg. The boom has a working range of 6 to 17 meters, making the crane suitable for a variety of lifting activities. The modular ballast system consists of stackable ballast blocks of 400 kg each, with a total ballast of up to approximately 2,800 kg, which ensures optimal stability during use. The crane is mounted on a trailer chassis and is therefore easy to transport and can be used quickly at various loc ...

Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.

Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

hall crane, crane, crane runway, crane rails, overhead conveyor, light crane system -Manufacturer: Demag, 2x straight sections overhead conveyor for light crane system KBK II -Load capacity: 800 kg -Dimensions: 1x 6015/105/H195 mm / 1x 5630/105/H195 mm -Delivery/Price: complete -Total weight: 189 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Friction wheel, running wheel for bridge crane, hall crane, assembly crane, workplace crane -Wheel: for crane chassis -Art.No.: 1031 4146 -Type:500h11 Part 1 Crane Chassis -Tread diameter: 500 mm -Wheel intermediate size: 90 mm -Hole: Ø 165 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 540 x 120 mm -Weight: 172 kg/piece

Intermediate plate for column jib crane, crane foundation plate, overhead crane, workstation crane, crane foundation plate -Column jib crane: Intermediate plate/base plate, outer diameter: Ø 1050 mm -Thickness: 50 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Empty weight: 676 kg