crankshaft used for sale

RECON Part number: 0215 3299 incl. GL test Diam.: 123,50mm / 97,75mm (2nd/1st stage) incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

WARTSILA 6L20 CRANKSHAFTS , STD SIZE , 2 PCS TOGETHER WITH GEARS AND COUNTERWEIGHTS

Crankshaft Deutz BV12M 628 NEW Part number: 0406 2874 -all main journals sanded to 1st step level 209, 50 mm -all connecting rod pin standard dimensions: 175 mm -without counterweights and gear -incl. GL test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

FOR SALE. USED 320 CYLINDER HEADS. FIRST TIME OF THE ENGINE. THESE HAVE NOT BEEN RECONDITIONED BEFORE AND ARE READY TO BE RECONDITIONED AND USED AGAIN. NO CRACKS, NO DAMAGE. IN VERY GOOD CONDITION AND CLEAN AND PRESSURE TESTED. WE HAVE 40 PCS. PRICE ON REQUEST. EX-WORKS UK WE ALSO HAVE 320 BLOCK, CRANK SHAFT-2 PCS IN EXCELLENT CONDITION AND MANY OTHER USED 320 PARTS FROM DISMANTLED/DECOMMISSIONED ENGINES.

FOR SALE... STORK WARTSILA 16SW 280 CRANK SHAFT TO WHOM IT MAY CONCERN; WE VE CRANK SHAFT OF STORK WARTSILA 16SW 280 AT OUR STOCK STANDARD MEASUREMENT WITH REPORT. WITH GEAR & COUNTERWEIGHTS. PLS FIND CRANK STAMP DETAILS ON BELOW. 1111SW 131 F013215 LLOYD S STU. 300240 6.93 STU. 9601908 YOB 1993 CRANKSHAFT READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/ aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Recon - Part number 0405 2465 - Completely polished - Standard size 119/98 - Flange diameter 160mm - Incl. counterweights & gears - With old GL-test stamping ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Recon - 5240301010 - Standard size - Incl. counterweights & gears ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

MAK 6M20 crankshaft Condition: Refurbished Part number: 1.13.7-25.1001-01 and 1.13.7-25.1000-11 - all base pins are standard size (180mm) - all connecting cones are 1st stage undersize ground (151,50mm) - incl. gear and counterweights - incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We are happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part number: 0208 9754 Complete standard dimensions: 210/175mm incl. counterweights and gear incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

MaK 6M552C CRANKSHAFT , STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

DEUTZ 6M628 CRANKSHAFT, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

STX crankshaft for engine 28/32 MAN. Part number - 101180B

Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

MAK 8M25 Crankshaft 2 pieces available in stock Standart sized Measurement report is available Tested for cracks, hardness and oscillation For further information please contact us at info@fin-marine

Wartsila 6L46 crankshaft available from stock standard sized Without any cracks or welding Measurement report available

Wartsila 8R32 Crankshaft Standard sized Measurement reports available Without cracks or weldings

SUB: FOR SALE... MAN 8L 20 / 27. USED CRANKSHAFTS AT TURKEY HAVE A GDY SIR WE VE 2 PCS USED MAN 8L 20 / 27 CRANKSHAFTS AT OUR STOCK AT TURKEY.. CRANSHAFTS MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

SUB: FOR SALE... MAK 8M 282AK . USED CRANKSHAFT AT TURKEY HAVE A GDY SIR WE VE 1 PC USED MAK 8M 332AK CRANKSHAFT AT OUR STOCK AT TURKEY.. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

MaK 8M453C crankshaft Std sized Without cracks or weldings With reports available

Recon Standard dimension Polished Part Number: 7W0212 Iincl. 2 gears Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part number: 559 031 36 01 ground 140.5/104.6mm Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 26.10-26/01 ground thin shaft 114.5/99.5 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1204 7170 Standard dimension without old stamp Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 301111 Completely standard size Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Mak 8M332 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

MAN 6L23/30 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

Used crankshaft immediately available

RECON - Part number 0405 2460 - Fully polished - from a new engine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Wartsila 12V32LN Crankshaft Suitable for 12V32 Vasa type Free Of cracks or welding With measurement reports available 1 pcs in our istanbul Stock

New Part Number: 561 031 04 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 8L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 6L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

SOLD New Wartsila W20V32 Crankshaft For Sale, Unused Also suitable for Wartsila 20V34SG engines 2 units in stock In New unused condition, from a surplus engines Other engine parts available

SOLD New Wartsila 20V34SG Crankshaft For Sale Unused Also suitable for Wartsila W20V32 engines 2 units in stock In New unused condition, from a surplus engines Other engine and power plant equipment available.

Key data: 1500 mm, 220 mm, 1700 mm

1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...

TO WHOM IT MAY CONCERN ; WE VE USED IN STANDART SIZE CONDATITION OF CRANKSHAFT OF ULSTEIN BERGEN KVGB-16 AT OUR STOCK THE CRANKSHAFT JOURNALS ARE IN STD SIZE LIMITS. IF YOU VE ANY FURTHER QUESTIONS PLS DO NO HESITATE TO CONTACT WITH US . BYE THE WAY WE VE ALSO BELOW LISTED MAJOR PARTS OF KVGB-16 ENGINES CYLINDER HEADS / PISTONS/ CON RODS / FUEL PUMPS / EXH GAS TURBOCHARGERS / OIL PUMPS / FUEL FEED PUMPS / WATER PUMPS ETC ETC AT EX STOCK. IZMIR TURKEY Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

Key data: 3000 mm, 850 mm

Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition

workpiece length: 1500 mm stroke: 0 mm swing dia.: 500 mm total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 5000 mm swing dia.: 1100 mm clamping length: 6000 mm grinding diameter: 1100 mm grinding wheel diameter: 1300 mm workpiece weight: 2500 kg main drive motor: 22 kW crankshaft bearing diameter: 275 mm steady: 100-250 mm speeds of tool: 400/500 U/min workpiece turning speeds: 20-40 U/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. Y ...

1x Crankshaft for Wartsila 20V34 SG NEW For Sale from Stock

1x Crankshaft for Jenbacher 624. No. 444990,444989,444988 1x Crankshaft for Jenbacher 624 No. 444990,444989,444988 1x from Stock Available

SUB: FOR SALE... SULZER 6S 20 USED CRANKSHAFT AT TURKEY HAVE A GDY SIR WE VE 1 PC USED SULZER 6S 20 CRANKSHAFT AT OUR STOCK AT TURKEY. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

workpiece length: 2700 mm swing dia.: 630 mm clamping length: 2700 mm stroke position adjustment: 40-130 mm grinding wheel diameter: 1000 mm total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data a ...