127,838 used machines on RESALE, but how to find them? Machine Search
Size: 0x0 Equipments: With hot glue machine
80-liter slicing machine with adjustable speed and rotation; capable of cutting to the desired dimensions. Servo motor PLC-controlled, adjustable
This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information.
General SKU364X914 MakeDMN Machinefabriek LocationBarneveld CEcheck TypeAL-175 DAI MZC Main Features MaterialStainless steel Motor0.55 KW Inlet diameter175 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter175 mm Rotor width200 mm Number of locks:8 Lock sizes80 x 80 mm Capacity5,5 l/rev. Inlet175 mm Inlet flange sizes300 mm Outlet175 mm Outlet flange sizes300 mm Installation height350 mm With motor0,55 kW, 220—242/380—420 volt, 1380 rpm Rotor speed14 rpm Air purged sealingscheck Information No.122625 Year of construction2012 Floorspace0,95x0,65 m Total height0,50 m Weight120 kgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...
General SKU271S307 MakeDMN Westinghouse Machinefabriek (NL) TypeMALD200 1 No.990510 / 40821 Year of constructionunknown LocationBarneveld Main Features MaterialMild steel Motor0.55 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialMild steel Rotary valvecheck Rotor width260mm Number of locks:8 Lock sizes260x90x100mm Inletdia. 200mm Inlet flange sizesdia. 345mm stc 295mm Outletdia 200mm Outlet flange sizesdia. 345mm stc 295mm Installation height400mm With motor0,55 kW 230/400 Volt Rotor speed140 rpm Air purged sealingscheck Information Floorspace0,6x0,6 M Total height0,4 M Weight100 KgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...
General SKU090W551 MakeBrabender Year of constructionunknown, With electric heating LocationBarneveld Main Features Motor6.5 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer (1x) Motor6,8 KW Variable speedcheck Speed± 5-120 Rpm Information Extra Specifications- With 7 interchangable measuring heads DiscountViscosity test machinesBrabenderDiscountPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU307S485 LocationBarneveld CEcheck MakeCampen Machinery A/S (DK) TypeAN 200500 Main Features MaterialStainless steel Motor5.5 KW Rotor240 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 240x400mm Inletdia. 40mm Outletdia. 45mm With jacketcheck Motor5,5 kW 400 volt With Monopumpcheck MaterialStainless steel Information No.02 03 350 Year of construction2002 Mounted on wheelscheck With switch(as is) Floorspace2,4x1,7 M Total height1,9 M Weight1000 Kg Extra SpecificationsIncludes a spare mono pump Foam mixersCampen Machinery A/SMixers > Foam mixersBrand > Campen Machinery A/S What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...
USED TETRA PAK A1 TCA 200ML FILLING MACHINE FOR SALE YEAR 2013 VERSION 900v Item #: Usm-238 Category Tetra Pak A1 Used Tetra Pak A1 TCA 200ml Filling Machine For Sale. Year of manufacturing 2013c version 900v, speed 14000 packs per hour. Working hours 5920 Conversion to 65ml available.
Used Used Case Packer Machines TMG: Year: 2018 Condition: Good Used Case Packer Machines TMG Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections Case packer tmg Box closing machine tmg Code: JM 91 More details: https://bottlingscout.com
Henkovac T4 – Professional Vacuum Packaging Machine (2019), Reliable vacuum performance with robust build quality for food‑industry environments., The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products., Technical Specifications, - Model: Henkovac T4 (Tabletop), - Year: 2019 (design generation from this period), - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations, - Chamber Dimensions: approx. 530 × 590 × 460 mm, - Seal Bar Length: approx. 420 mm, - Weight: ~55 kg, - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request), Key Features, - High ...
High tipping bucket 240 cm with Euro hitch, - Own weight: 793 kg, - HYDRAULIC CONNECTOR 1 Euro quick-release coupling ISO 12.5 M18x1.5 â Socket, - HYDRAULIC CONNECTOR 2 Euro quick-release coupling ISO 12.5 M18x1.5 â plug, - profiled sides to increase volume, - Volume: 2.28 m³, - Dig scraper strip HB500 150x16, - Scraper strip HB500 150x16 easy access to bolt lubrication, - tilt angle 109°
This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm
Overview This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3
A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.
Rondo jumbolina machine Stainless, Jumbolina machine with twin cutting station, belt dimensions 5400mm x 640mm, variable speed, with various different cutting heads and blades, mobile, 3Ph
General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous Motor5,5 kW, 400 volt MaterialMild steel Information Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0.75 kW, 40 ...
Continue spiraalschroefmachine voor de productie van industriële schroeven. Spiraalvormige schoepen worden gevormd door een metalen strip onder druk door conische rollen te leiden. Maximale strookbreedte: 200 mm Maximale stripdikte: 11 mm spiraalrichting naar links of naar rechts optimale rolsnelheid: 80 tpm Spoelcapaciteit: 5 ton Gewicht van de machine: 12 ton vermogen: 75 pk Inclusief rolslijphulpstuk: hiermee kunnen de conische rollen opnieuw geslepen worden zonder ze uit de machine te hoeven verwijderen. Inclusief hydraulische guillotines: geschikt voor het doorsnijden van alle soorten vleugels. Standaard steek: de buitendiameter is gelijk aan de steekmaat. Korte spoed: de spoed is kleiner dan de buitendiameter. Lange spoed: de spoed is groter dan de buitendiameter. Lintvlucht: vergrote binnendiameter door gebruik van smal basismateriaal. Komvormige vliegwiel: het vliegwielblad staa ...
Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...
Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2510 € : 150 mm : 150 x 2000 mm : 200 x 150 mm : 530 mm : 3.5 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 115 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 150X/2 with 2 speeds € 2.960,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2100 € : 75 mm : 75 x 2000 mm : 200 x 75 mm : 530 mm : 3 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 100 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 75X/2 with 2 speeds € 2.530,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Size: 385 x 700 mm Equipments: Max sheet size 700mm x 385mm Min sheet size 210mm x 140mm Min paper thickness 110mm Max paper weight 400gsm Speed 6000 (A4 creased and folded) Dimensions (L)2020mm (W)680mm (H)1265mm Power supply 240v 50/60hz Weight 190kgâs
General SKU349U858 MakeServolift LocationBarneveld CEcheck TypeHF 250 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information No.10815 Year of construction2003 With switchcheck Floorspace0,65x0,67 m Total height4 m Weight650 kgCatalysts & fillersFeed additivesPaper & otherLifting/tilting machinesSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes ...
: gebraucht : 2016 : 9737 : prompt, Zwischenverkauf v : 9800 € : 1 : 8330 € : 2025 mm : 3 mm : 500 mm : 4 kW : 2500 mm : 1720 mm : 1200 mm : 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TRITURATORE MONOLABERO LUNGHEZZA ROTORE 3000 DIAMETRO ROTORE 800 POTENZA MOTORE ELETTRICO 250 kW ORE LAVORO CIRCA 29000 GRIGLIE: 1 set foro tondo Ø 30mm 1 set foro esagonale 70mm 1 set foro a rombo 40mm 1 set foro tondo Ø 60 mm 2 griglie foro tondo Ø 100 mm
Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter b ...
used
Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T
Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels
Key data: 1500 mm, 220 mm, 1700 mm
1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...
Key data: 3000 mm, 850 mm
Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition
workpiece length: 1500 mm stroke: 0 mm swing dia.: 500 mm total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece length: 5000 mm swing dia.: 1100 mm clamping length: 6000 mm grinding diameter: 1100 mm grinding wheel diameter: 1300 mm workpiece weight: 2500 kg main drive motor: 22 kW crankshaft bearing diameter: 275 mm steady: 100-250 mm speeds of tool: 400/500 U/min workpiece turning speeds: 20-40 U/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. Y ...
workpiece length: 2700 mm swing dia.: 630 mm clamping length: 2700 mm stroke position adjustment: 40-130 mm grinding wheel diameter: 1000 mm total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data a ...
MWM TBG 234-V12, MWM TBD 234-V12 2 piece crankshaft, recon incl. gear and counterweights TN: 1216 3119 / 6.234.0.140.016.6 1st stage Price/piece: € 4,250.00 (ex works) Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
2x crankshaft, recon incl. gearwheel and counterweights PN: 1216 3119 / 6.234.0.140.016.6 2x 1st step Price/each: € 4.250,00 Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- Sales to commercial customers only! ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
Crankshaft Recon Completely ground to 1st level: 0.025'' Tn. 6L7500 Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
FOR SALE STANDARD SIZE MEASURMENT CRANKSHAFT OF MAK 6M 332AK TO WHOM AT MAY CONCERN; THE CRANKSHAFT HAD BEEN PUT ON V BLOCK AND FOLLOWING TESTS HAD BEEN CARRIED OUT. -Main and crankpin journals measurements had been carried out. -MPI test had been carried out and no. crack had been observed. Crankshaft were found typical. -Run-out measurement had been carried out found in good order. -Hardness test had been carried out to all crankpins and main bearing journal. All values had been found in permissible limits. -Crankshaft had been polished. CRANK SHAFT READY TO TRANSPORT AT IZMIR - TURKEY. WITH FULL SEVICE REPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY ...
Recon Part number: 1230 2078 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON MWM TBD604 BV16 / TBG604 BV16 9190150117 - fully polished, on standard size 150/125 mm - part number 1208 7576 = 1213 5133 - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON 9190150128 - Completely sanded on 1e level undersize 123,75/97.75 mm - part number 0400 1106 - incl. counterweights and gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Standard size Part number 1213 5136 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON Standard size part number: 1230 2056 = 1507 7534 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON -completely polished on 1st level -incl. weights Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON C-Version Polished Ground bearing standard measure 155 mm connecting rod pin standard size 145 mm Incl. Counterweights and Gear Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us.
RECON Part number: 6.440.0.140.036.4 -completely on 1st level 199.5/174,5 mm polished -incl. DNV GL decrease by 2015 -incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 245831 / 245833 - Standard size 180/150 mm - E-version - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
maximum number of results exceeded
please refine your search
