136,320 used machines on RESALE, but how to find them? Machine Search
Kemper Dough Weigher Kemper Abwieger Type: Imperator CT large plastic funnel with oil sprayer with long discharge conveyor Adjustable speed with bemehler can be moved on castors Year of construction: 2005 400 volts / 50 Hz Fuse 16 A Height: 185cm Width: 140cm Depth: 70cm
3.6x35 mm, blank ring, 102 boxes, 5 kg per box Auction-ID: A1-50964-44
Number of units [pcs.] 7 Auction-ID: A1-40983-131
Used Dunkes DF 350 punching machine/printing press Auction-ID: A1-50936-134
Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm
MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...
Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph
Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm
It is a used, reconditioned Rego stirring and beating machine SM 2 (20 liters) for sale. The speed of the machine is infinitely adjustable. With automatic running of the timer, bowl height adjustment by crank revolution. Electrical conversion from beating to stirring, real deflection due to stationary shaft. The machine has a new stirring head, has been completely re-mounted and painted. It is in very good condition and runs very smoothly. External dimensions: width: 60cm, depth: 50cm, height: 140cm Incl. bowl, stirring tool, beating tool. Price on request.
Tamper Evident labelling machine for applying labels to both sides of folding boxes. Machine incl. PCE Pharmacontrol Pilot 4.1.0. which controls and manages units such as printer, cameras and scanner. Labeller is fitted with WOLKE Printer
Brake boring device Hunger 6.5 A 400 V System Brake drum & disc with accessories Grinding spindle Safety grilles
Viewing by appointment Auction-ID: A1-51065-31
Automatic labeller for the application of self-adhesive vignettes and tamper evident seals. Balcony design. Capacity: up to 180 pcs/min. The machine is equipped with: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - Dopple REAJET printing system, type HRpro with camera control system - Preparation for Vision System LAETUS WT Commandor - Carton Transport Belt: pitch 250 mm - Various control systems for label presence with ejection etc.
x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t
A used spiral kneading machine Kemper SP 125 L is currently for sale and immediately available in our warehouse in Bielefeld. Spiral kneading machine Kemper SP 125 L - Stainless steel boiler - Stainless steel spiral - 2 x automatic timers - 2 x slow and fast speeds - with flour dust cover - for 125 kg of flour or 200 kg of dough The machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.
Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data
Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
MBO T 460 folding machine; good condition; cleaned and tested; new folding rollers; new warehouses; new straps; 4 folding pockets; shed display; .max. Format 46x66cm;, min.15x17cm; MS control; knife shafts; Flat stack feeder. Folding machine MBO T 460; good condition; cleaned and checked; new rollers; new bearings; new belts; four pockets; stream delivery; max.size 46x66cm, min.15x17cm; MS counter; slitter shaft rollers; Folding Pile Feeder.
swing diameter:80 mm workpiece length:450 mm weight of the machine ca.:3500 kg
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg
max. wheel diameter:40-200 mm total power requirement:31,3 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,8 x 2,2 x 1,8 m
CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)
Radial drilling machine, used Manufacturer: KOVOSVIT Type: VO 50 Year built:1999 Projection: 1600 mm Drilling capacity: 60 mm Quill stroke 310 mm Table / footprint 1470 x 986 mm Weight: approx. 5 t
horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg
max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm
Dressing diameter: Planing width: min. module: for Reishauer RZ150
Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm
Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978
Nock C460 Meat derinder Serial: 1956290 Stainless, cutting width 430mm, cutting speed 19m/min, with 10 spare brand new blades, 0.75Kw, mobile, 3Ph
DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...
Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min
maximum number of results exceeded
please refine your search
50 € 
