crankshaft grinding used for sale

Manufacturer: Carl Zeiss Model: OVS 250 Machine type: Automatic glass grinding machine Current type: D Frequency: 50 Hz Operating voltage: 380 V Rated current: 7.6 A Control voltage with/without transformer: 220 V / 24 V Rated fuse current in the supply line, without/with increased delay: 20 A Wiring diagram number: 85 24 31 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Carl Zeiss Model: HKM063 Machine type: cylindrical grinding machine Technical Specifications: - Frequency: 50 Hz - Operating voltage: 380 V - Rated current: approximately 10.1 A - Control voltage with/without transformer: 220 V / 24 V - Rated fuse current in the supply line, without/with increased delay: 16 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Control cabinet for ELB surface grinding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price

STUDER S 20 FAVORIT ist eine Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenhöhe 100 mm, Spitzenweite 400 mm, Längsweg 420 mm; Scheibe Ø350×50 mm (Bohrung127), Breite 30 mm; Werkstück 20 kg. Techn.: Umfang 30 m/s; Spindel 30–1200 t/min st.; Tisch 100–3500 mm/min st.; Motoren 3 kW/0,5 kW; 3×380 V; 10 kVA; Gewicht ~1600 kg; Abm.2350×1480×1400 mm. Zubehör: Reitstock, Innen-Schleifeinrichtung, Abrichtgerät, 3-Backenfutter Ø100/160, 2×CBN, Spannzangen W20. Erreicht enge Toleranzen; Einsatz: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhren. Technische Daten ohne Gewähr

HAAS Schleifmaschinen MULTIGRIND CA ist eine CNC Werkzeugschleifmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Sie verfügt über 5 Achsen: X 630 mm, Y 345 mm, Z 430 mm; Schleiflänge 500 mm; Schleifdurchmesser 260 mm; max. Schleifscheibendurchmesser 250 mm; C-Achse (Spindel) Auflösung 0,001°; Schwenkwinkel -225° bis +70°; Auflösung 0,0001 mm. Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 8500 kg; Abmessungen L 2650 x B 2400 x H 3200 mm. Ausgestattet mit Lade- und Entlade-Roboter sowie Feuerlöschanlage. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Mitutoyo Length Measurement Mod. KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the puller, including the air conditioning unit, Tip width: 630 mm, the machine has no tailstock and was specially used for forage work, max. grinding diameter: 280 mm, max. grinding wheel size: 400 x 40 x 127 mm, (none included), Speed of grinding spindle 2040 min-1, 6 speed levels of the tool spindle: 22.4 to 280 min-1, Drive motor 4 kW, Accuracy / Smallest part value: 0.001 mm, Taper in Riding and Tool Spindle Morse 4 Largest table length movement: 760 mm, Mass between tips 120 kg, Total power: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine Dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: correspond to production no.: 1989 - 1991 Swivelling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and autom ...

Key data: 40 mm, 150 mm, 150 mm

Used and refurbished centerless cylindrical grinding machine Palmary PC-12-SPS, year of manufacture 2017, 2025 mechanical and electrically overhauled with new SIEMENS S7 control system. Including coolant with paper tape filter, various support rulers, Newly painted. The machine is in mint condition. The machine does not have a fixed center. Machine has a CE mark, spare parts and training can be done by the salesman. Current delivery time approx. 10 weeks Grinding wheel: 305x150 mm, regulating disc 205x150 mm, regulating disc speed 10-100 (250) mm, rotational speed the SS 33 m/sec, grinding spindle drive 5.5 kW, weight 1.65 to, space requirement approx. 2.05 x 1.2 m

REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA

This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4 color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details.

Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible.

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 € : 1660.74 € : 1015 mm : 600 mm : 1000 x 400 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 - 32 mm : 450 mm : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4400 x 2300 x 2400 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 € : 1581.36 € : 810 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 450 mm : 0 - 675 mm/min : 480 mm : 500 - 2200 1/min : 3,75 (optional 5,5 / 7,5) kW : 1.5 kW : 3250 mm : 3075 mm : 2250 mm : 2900 kg : 175 kg : 350 kg : 355 x 50 x 127 mm : 1,1 kW Fully enclosed splash guard 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angula ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 € : 1267.62 € : 800 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1.1 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator a ...

VELP OV 625 homogenizer complete with grinding rod and stand New equipment in its original packaging Model No.SA20900470 OV625 Materials: Aluminium – Technopolymers Volume: 0.2 ml – 2.5 L H2O Maximum viscosity: up to 5,000 mPa s Speed: 3,000 – 25,000 rpm Speed Control: Digital Speed adjustment accuracy: 200 rpm With 20mm diameter dispersing tool With stand Power consumption: 800 W Weight: 2.4 kg Dimensions: 92x280x130 mm (3.6x11x5.1 in)

grinding diameter: 750 mm grinding length: 5400 mm centre height: 375 mm max. workpiece diameter: 750 mm workpiece weight: 10000 kg table - swivable +/-: - ° grinding wheel size: 750/650 x 75 x 305 mm grinding wheel turining speeds: 750 U/min turning speed range - workpiece: 14,5 - 86 U/min main drive motor: 15 kW workpiece drive: 7,5 kW feeds - fine adjustment: 0,00635 - 0,0508 mm/min total power requirement: - kW weight of the machine ca.: 27 t dimensions of the machine ca.: 13,5 x 3,4 m Refurbished 2023 and equipped with: - DRO - Table swivable - 9 x steadies - Coolant/Filtration Tank Machine has had over 85000,-€ of retrofit work in 2023 including: -- replacement of air bearing liners -- 7 x steadies fully overhauled -- Overhaul of top table & centre heights of workhead & tailstock -- New electrical wiring & cabinet The data for this ad was created with ModulMWS - the software s ...

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 € : 122.59 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 € : 149.25 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

grinding length: 300 mm grinding width: 500 mm workpiece height: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SAACKE Model No.: UWIE Year: 2003 Condition: Used Stock No: 9484 Switch-on hours: 134460 h Hours: 15884 h X-axis travel: 340 mm Travel Y: 240 mm Travel distances Z-axis: 840 mm Maximum spindle speed: 10000 1/min Machine height: 2090 mm Machine length: 2450 mm Machine width: 2050 mm Machine weight: 3900 kg

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Key data: 1600 mm, 880 mm

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Key data: 1600 mm, 880 mm

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Machine no. 2037.04 See photos !

max. grinding diameter: 175 mm grinding length: mm workpiece length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 450 mm, 200 mm

Surface grinding machine, used, Grinding area: 450x200x250mm, with magnetic plate, puller, holders, coolant device, ...

Internal cylindrical grinding machine, Tripet Swiss, 1991, Grinding slide. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...

This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details.

grinding length: - mm grinding width: 600 x 2000 mm workpiece height: - mm Control: - table surface area: ca. 600 x 2400 mm x-travel: 2100 mm y-travel: 550 mm z-travel: 560 mm max. dia. of grinding wheel: 400 mm total power requirement: kW weight of the machine ca.: ca 7,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment

Complete disassembly Cylindrical grinding machine STUDER RHU 500 – MIRA Retrofit We have a complete exploded view from a STUDER RHU 500 cylindrical grinding machine, ideal for spare parts, repair or maintenance. The machine has been dismantled by MIRA Retrofit, specialists in the reconstruction and modernization of grinding machines, preserving its main assemblies and components for sale as spare parts. Available, among others: - Workpiece holder head and its components. - Tailstock headstock. - Grinding head and grinding assemblies. - Motors and drives. - Spindles and mechanical elements. - Trolleys, guides and moving elements. - Steering wheels, controls and mechanisms. - Hydraulic and pneumatic components. - Electrical elements. - Protections, supports and accessories. - Different original STUDER parts. Sale by individual components or possibil ...

STUDER internal grinding spindle – 40,000 rpm with accessories High-speed spindle for internal grinding STUDER is for sale, in excellent condition and properly stored in its original wooden protection box. Key features: - Type: 102540B - Maximum speed: 40,000 rpm - Compatibility: Studer S30, S40, S31, Favorit, etc. - Application: Internal grinding - High-precision construction. - Includes wheel holders/accessories and tools shown in the photographs. - Includes documentation and instructions. - Wooden box for storage and transport. Ideal as a replacement for STUDER grinding machines, for replacing an existing spindle or for repair projects. The set is delivered with the available accessories shown in the photographs, offering a particularly interesting solution for grinding workshops that need hard-to-find STUDER original equipment. National and inter ...

STUDER S20 Favorit – Universal cylindrical grinding machine 400 x 100 mm – Complete retrofit The STUDER S20 Favorit universal cylindrical grinding machine is offered for sale for high-precision external and internal grinding work. Machine completely rebuilt and subjected to a comprehensive retrofit by specialists, including mechanical, electrical and functional review. Key features: - Manufacturer: STUDER - Model: S20 Favorit, year 2002 - Distance between centers: 400 mm - Height between centers: 100 mm - External and internal grinding - CE marking - Version equipped with PLC and updated automation - Completely rebuilt machine - Revised, refurbished and adjusted components - Proven geometry and function - Excellent mechanical and aesthetic condition - Wide range of accessories available on request The machine has been carefully checked and adjusted by spe ...

Key data: 250 , 400 , 125

STUDER S21 CNC – Universal cylindrical grinding machine – 400 x 125 mm – Integral retrofit The STUDER S21 CNC universal cylindrical grinding machine is offered for sale. High precision machine designed for external, front and internal grinding operations, rebuilt and modernized by MIRA Retrofit, specialists in grinding machine reconstruction and retrofit. Equipped with turret wheel head, configured for: - 2 wheels for external grinding - 1 internal grinding wheel Description: - Manufacturer: STUDER - Model: S21 CNC - Year: 2008 - Distance between centers: 400 mm - Height between centers: 125 mm - CNC Control: GE Fanuc 21i-TB Series - Type: CNC Universal Cylindrical Grinding Machine The machine will be delivered completely rebuilt, adjusted, checked and ready to work. Availability: please consult National and international shipments. For more i ...

Machine number: 2355 Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 45 kW Control: SIEMENS SINUMERIK Center height: 320 mm Center width: 3000 mm Max. grinding length: 3000 mm Grinding spindle diameter: max. 620 mm Grinding spindle tool holder: 80 mm diameter, taper 1:5 Swivel capability: +- 10° Workpiece spindle bore: MORSE K 6 mm Swivel capability: +30° incl. extensive item spare parts and accessories, documentation, grinding wheels, belt filter system, extraction and filter Hours read: 2667 Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-231

Manufacturing number: 160090 Operating voltage: 400 V Frequency: 50 Hz Rated current: 70 A Connection: 48 kVA Tip height: 260 mm Center width: 2000 mm Control: SIEMENS SINUMERIK Max. grinding length: 2000 mm Grinding wheel diameter: max. 520 mm Max. grinding length for plunge grinding: 125 mm Max. workpiece weight: 500 kg Tool holder: Taper 1:10 D=120 Drive power: 22 kW incl. belt filter system, extraction, various cones Auction-ID: A7-49089-356

Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 60 kW Control: SIEMENS SINUMERIK Center height: 180 mm Center width: 4100 mm Max. grinding length: 4100 mm Grinding wheel diameter: up to 360 mm Max . grinding length for groove grinding: 125 mm Max. workpiece weight: 1200 kg Tool holder: D=120 Drive power: 30 kW Spindle bore: 50 mm incl. two tailstocks, documentation, a workbench as well as extensive machine accessories such as various tips and cones, tailstock holders, steady rests as well as belt filter system and suction Attention: the machine can be transported on a truck up to 3000 mm wide ! Auction-ID: A7-49089-353

Machine number: 2356 Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 45 kW Control: SIEMENS SINUMERIK Center height: 320 mm Center width: 3000 mm Max. grinding length: 3000 mm Grinding spindle diameter: max. 620 mm Grinding spindle tool holder: 80 mm diameter, taper 1:5 Swivel capability: +- 10° Workpiece spindle bore: MORSE K 6 mm Swivel position: +30° incl. extensive batch Tips in different sizes, matching steady rests, documentation, belt filter system, suction Hours read: 2355 Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-235

Manufacturing number: 103136 Operating voltage: 380 V Frequency: 50 Hz Connection: 23.4 kVA Rated current: 40 A Clamping length: 2468 mm Grinding length: 2405 mm Workpiece table max. swivel: 3°/5° Tip height: 180 mm Centering tip: MK 5 Grinding headstock max. travel: 180 mm Max. grinding wheel diameter: 500 mm Bore diameter: 203.2 mm Workpiece weight max. between tips: 400 kg Max. in chuck (including chuck): 100 kg incl. digital display, documentation, an extraction system and suitable accessories such as tips and tailstock holders Attention: the machine can be transported on a normal standard truck up to a width of 3000 mm! Auction-ID: A7-49089-354

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !

Surface Grinding Machine Jung JF625

Surface Grinding Machine Jung JF 520

Grinding spindle incl. grinding wheel, 2 holders, belt wheels, electric motor, wheel cover, balancing mandrel, and description. Fortuna, 14 UA 85, Outer Ø : Ø 85 mm Length : approx. 400mm Other grinding spindles on request. See photos !

STUDER S30 Favorit – High-precision universal cylindrical grinding machine Completely refurbished and modernized machine (complete retrofit), intended for cylindrical grinding of exterior and interior surfaces. Technical data: - Distance between points: 650 mm - Height between dots: 175 mm - External and internal grinding - Fagor digital measurement system Complete Refurbishment / Retrofit: - The machine has been completely disassembled and rebuilt piece by piece. Work carried out: - Complete mechanics overhaul - Revision and refurbishment of the guides - Refurbishment/overhaul of bearings and wear elements - Completely new electrical cabinet - New electrical installation and wiring - Complete modernization of the electrical system - Installation of Fagor digital visualizer - Review and adjustment of all sets - Full geometric adjustment and precisio ...