136,473 used machines on RESALE, but how to find them? Machine Search
A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10 ...
Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.
Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg
Distance between points: 1000 mm, Ø max to be rectified: 400 mm, Maximum length to be rectified: 600 mm, Max travel Z axis: 1300 mm, Max travel X axis: 378 mm, Height of points: 205 mm, Ø of the grinding wheel: 600 mm, Grinding wheel width: 63 mm, Maximum width of grinding wheel: 125 mm, Grinding wheel hole Ø: 203 mm, cnc brand: SIEMENS, cnc model: 840D, Main engine power: 22 Kw, Grinding wheel speed: 45 m/s, tailstock cone: mk5, Counterpoint tour: 100 mm, Workpiece head cone: mk5, Workpiece head rotation: 90º, Maximum piece weight: 300 Kg, Working accuracy of the machine: IT4 ISO, Fine taper adjustment +/-: O, 1 mm/a, speed of the working feed of the table: from 0 to 7.5 m/min, Plan dimensions: 4500x3000x2500 mm, Weight approx.: 8000 Kg
Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Max. diameter to be rectified: 250 mm, Height of points: 125 mm, Working wheel dimensions (od x id x width): Ø 406 x Ø127 x 50 mm, Max. grinding wheel diameter: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, CNC model: 18TB, Main engine power: 7.5 Kw, Z and X axis resolution: 0.1 µmm, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, tailstock cone: MORSE 4, Rotation speed of the workhead: 8 to 800 rpm, Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg
Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg
VIZAS VZ-818 tool grinding machine was manufactured in 2014 in Belarus by OJSC «VIZAS» Works. The machine has worked for a small number of hours and is in very good technical condition. The VIZAS VZ-818 is designed for grinding cutting tools and performing other grinding operations in workshops and tool rooms. It enables the machining of workpieces with a maximum diameter of 200 mm and a length of 500 mm, clamped onto a magnetic plate or directly onto the worktable. The grinding wheel spindle features 4-step rotational speed adjustment in the range from 2800 to 8000 rpm, enabling precise adjustment of parameters to the type of machining performed. The VIZAS tool grinding machine is offered with a comprehensive range of equipment, consisting of, among others, a tailstock and a grinding wheel dressing device, which restores the grinding wheel’s original geometry and properties. The ...
This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details.
External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Voltage: 380 V Dimensions (L x W x H): 3500 x 2000 x 2200 mm Weight: approx 3,2 T
This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details.
grinding length: 600 mm grinding width: 350 mm workpiece height: mm table surface area: 1720 x 400 mm dimensions of grinding wheel: 400 x 50 x 127 mm table height over floor: mm : 600 x 300 mm grinding spindle speed: 3000 U/min table load capacity: kp total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3,0 x 2,0 x 2,2 m Surface grinding machine - Magnetic grinding wheel - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information.
used
Sanding belt width: 200 mm Sanding belt length: 1800 mm Table support surface: 230 x 600 mm 5 grinding speeds by V-belt step pulley drive electr. Connection: 400 V, 0.55 kW
filling capacity: 400 Liter Usable Volume: 300 Liter filling amount: max. 850 kg workpiece sizes: max. 850 x 200 mm Individual weight of workpiece: max. 30 kg turning speeds: 4.0 - 15.0 U/min Inner drum width: 925 mm drive motor: 380 V weight of the machine ca.: 1950 kg. range L-W-H: 3100 x 1600 x 2000 mm good / well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=xxnCddCmXe4 Description: - LIMA cleaning machines for long concrete formwork parts, formwork clamps for flame-cutting parts, plasma-cutting parts, laser-cutting parts for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the ...
CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...
CNC gantry grinding machine Ziersch Z1030 Control: Mitsubishi Touch Year of manufacture: 2018 Internal machine no. 64 Travels: Grinding area: 3,000 x 1,200 mm Transverse movement: 1,100 mm Longitudinal movement: 3,500 mm Distance table to spindle center: 1,050 mm Size of the magnetic clamping plate: 3,000 x 1,000 mm Feed longitudinal axis: 5,000 – 30,000 mm / min. Feed transverse axis: 0.01 – 5,000 mm / min. Vertical axis feed: 0.001 – 3,000 mm / min. Power grinding spindle motor: 22 kW Accessories: Belt filter system Electronic handwheel
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Tall: 1.535 mm, Weight: 2.200 kg
Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg
Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg
grinding length: 600 mm grinding width: 400 mm workpiece height: 350 mm table-size: 820 x 350 mm dist. center of grinding spindle - table: 140-525 mm table movement: 660 mm workpiece weight max.: 400 kg diameter / bore of grinding wheel: 350 x 50 x 76,2 mm table speeds: 2-28 m/min power capacity - grinding motor: 3,7 kW total power requirement: 8 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Solver - KS360 - belt sander - Motor power: approx. 1.6 – 2.6 kW - Grinding Length / Material - Endless -Grinding diameter 3 - 70mm - Belt speed: approx. 7.5 – 34 m/s (depending on the pulley) - Drive: Electric motor with belt drive - Sanding belt length: 2,500 mm - Sanding belt width: 5 – 75 mm - Contact washers: Ø approx. 100 – 225 mm - Strap system: 3-roller system Dimensions: LxWxH 0.9x0.7x1.8 meters / Weight 350Kg
Key data: 600 mm, 300 mm
Wagner FSG1224ADIII Grinding path 600 x 300 Magnetic clamping plate 600 x 300 Travel 650mm Travel manual 700mm Grinding removal 99,999mm Drive power 3.7 Kw Touch panel 8" TFT Compensation Training Adjustable adhesive force Automatic Nonwoven Roll Filter Stepless speed control 750 – 2100
A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible.
CNC Surface Grinding Machine LGB R12070 Year of Make: 2005 Internal machine no. 65 Grinding width: 600 mm Grinding length: 1,200 mm X-axis: 1,320 mm Y-axis: 480 mm Z-axis: 730 mm Grinding height above table max.: 520 mm Accessories: Belt filter system Magnetic plate approx. 1,000 x 500 mm
grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...
CNC Surface Grinding Machine LGB R12070 Year of Make: 2005 Internal machine no. 65 Grinding width: 600 mm Grinding length: 1,200 mm X-axis: 1,320 mm Y-axis: 480 mm Z-axis: 730 mm Grinding height above table max.: 520 mm Accessories: Belt filter system Magnetic plate approx. 1,000 x 500 mm
Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sharpening machine MADO type MNS 630 Type of current: 400 volts, 50 Hz three-phase current Dimensions : 520 x 365 x 368 mm Weight: 17 kg Footprint : 180 x 340 mm With the SUPERSCHLIFF from MADO you can achieve the correct "spherical grind", which is recommended by the experts of leading knife manufacturers. iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
Ø min/max to be rectified: 3 - 300 mm, Dimensions of the grinding wheel: Ø610xØ304.8x508 mm, Dimensions of the regulating wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW
Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: - mm grinding length: - mm centre height: - mm diameter: - mm length: - mm tool adaptor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Bavelloni Type: PR88 Machine Type: Flat Glass Polishing and Grinding Machine Serial number: 02.30.52 Year of manufacture: Revision 2017 Weight: Approx. 3,600 kg Connected load: 16.7 kW / 400 V Operating pressure: 7–8 bar Length: 7,400 mm Width: 1,500 mm Height: 3,000 mm Working height: 900 mm Transport dimensions (L × W × H): 4.0 × 2.5 × 2.4 m Max. feed speed: 0.5–5 m/min Glass thickness (min.–max.): 3–30 mm Glass dimensions (min.–max.): Min. 50 × 50 mm Number of Spindles: 8 Spindles Machine condition: Functional, disassembled General condition: Very good Photos/videos available: Some photos show a different, but identical machine
A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible.
Double side grinding of flat mass parts, e.g. cams, piston rings. Machine type: Planet V7 Machine No.: 381019 Technical data Double page flat grinding Part diameter: max. 180 mm Part thickness: max. 100 mm Condition: Technical – very good, Optical – as good as new (Pictures partly similar) Seller Offer No. resale 770057
Speed Finishing Device Processing of rollers, including for the paper, printing and steel industries. Machine Type: Speed Finisher Machine No.: 721615 Technical data Workpiece diameter 80 – 500 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)
Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A horizontal surface grinding machine Elb is available. Grinding process: peripheral grinding, table dimensions X/Y: 915mm/255mm, magnetic chuck dimensions X/Y: 600mm/310mm, grinding dimensions X/Y: 600mm/300mm, max. grinding height: 400mm, feed rate: 30m/min, speed: 2600rpm, machine dimensions X/Y/Z: approx. 2000mm/1600mm/2100mm, weight: approx. 2750kg. An on-site inspection is possible.
This PALMARY GU32x60S cylindrical grinding machine was manufactured in 2015. It features a swivel over table of Ø320 mm and a distance between centers of 600 mm, allowing for a max external grinding diameter of Ø300 mm. With a grinding wheel speed of 45 M/s and a spindle speed up to 300 r.p.m., this machine is ideal for precision work. If you are looking to get high-quality grinding capabilities, consider the PALMARY GU32x60S machine we have for sale. Contact us for more information.
Key data: 700 mm, 350 mm
A Blohm Simplex 7 surface grinder is being sold. Grinding length: 700 mm Grinding width: 350 mm Table clamping surface: 1,100 x 300 mm Self-dismantling and self-collection. Price is net plus VAT All information without guarantee
Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding ...
Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible.
Table size: 3000 x 1000 mm Drive power: 4.0 kW Sanding belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Sanding belt lengths: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: -Two sanding belts for pre-sanding and finishing sanding -Triangle guide of the straps for a clear view and freedom of movement -Pneumatic abrasive belt clamping with ball guides -Adjustable belt speed -Tilting of the sanding belts up to 90° -Self-centering abrasive belt -Pneumatically opening belt channels -Manual workpiece movement in 3-axis -Each axle with brake or lock -Vacuum tension for the workpieces
A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible.
A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.
A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.
A CNC tool grinding machine Ewag for rotationally symmetrical tools is available. Travel X/Y/Z: 460mm/190mm/730mm, Rapid traverse: 6m/min, Max. tool length: 500mm, Spindle interface: ISO50. Machine dimensions X/Y/Z: approx. 3300mm/2300mm/2500mm, Weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, feed X/Z: 8m/min, workhead spindle taper: MK4, tailstock taper: MK4, tailstock quill travel: approx. 35mm, grinding wheel dimensions: 400mm/50mm/127mm, grinding spindle speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. internal grinding wheel diameter: 100mm, filter volume: 300l, filter capacity: 100l/min, chuck diameter: 160mm, operating hours: approx. 350h. Including chuck, magnet and dressing device. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
