128,205 used machines on RESALE, but how to find them? Machine Search
OTT Comet-2 1100 • Wide belt sanding machine • Grinding width 1100 • Machine is unchecked • Service recommended • No Guarantee / No Warranty • From stock Lieboch NET € 1.500,00
Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...
Edge Grinding Machine Gartner FLK 4 -used-incl. Mitre stop---------- Technical data ----------sanding belt width: 200 mm, sanding belt length: 2,350 mm, dimensions work table: 870 x 400 mm, belt speeds: 4, suction nozzle Ã: 80 mm, motor: 3 kW
Graver grinding machine Make: Lid Model No.: S0 Built in 1994
CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...
An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.
gebr. Double Bench Grinder Fabr. Griffin Diameter 200 mm Revolutions 3,000 rpm.
Double bench grinder, Fabr. Cordes & Sluiter, Type DOT-300 -Motor power 0.85 kW -Speed 1400 rpm -max grinding wheels Ø 300 x 40 mm -Operating voltage 380 volts
Long belt grinding machine TYPE: LZG-M-1 Table size 2500 x 1000 mm with speed control •For grinding, matting and polishing steel Strip speed: 5-30 m/s infinitely electronically adjustable by potentiometer Electromotive, maintenance-free table height adjustment; Adjustment range: 350 mm Working area: 2300 x 1000 mm Belt dimensions: 6800x150 mm Motor power sanding belt: 5.5kW Max. table load: 200 kg Steel table structure with wooden slats; Incl. adjustable workpiece stop Table guide by means of hardened and ground guide shaft Ø 35 mm and 6-way ball bearings on each side Dimensions sanding pad: 320x350 mm Central and clear control panel Single-sided large column projection: 1000x350 mm Incl. workpiece lighting Fold-out extraction hood for better dust extraction- Diameter of drive roller: 0 300 mm- Diameter of suction nozzle: 0 180 mm- Air Velocity: 2 25 m/s- ...
Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.
weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible.
These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive
Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.
Centerless grinding machine, ROSSI MONZA 410 Monzesi, Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation, auto plunge, overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel ...
A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
4. Specifications Item Unit OGM-250UDX Capacity Swing diameter over table mm 220 Distance between centers mm 500 Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (center of workpiece) Grinding wheel Outer diameter x width x bore mm 305x25x 127 Rotational speed (by changing the belt) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding headstock X-axis travel mm 203 Angle of inclination degrees + 30o Min. travel increment mm 0.001 Feed value with hand wheel mm/min 2 per revolution of the wheel Table Z-axis travel mm 640 Angle of inclination degrees 4 to 9 Feed rate with hand wheel mm 7.5 per wheel revolution Automatic feed rate mm/min 50 to 4000 Head Workpiece Spindle type - Spindle for combination of non-rotating- rotating Morse taper No. 3 Spindle through hole diameter mm 17.5 Spindle speed min-1 10-500 Angle of inclina ...
Code: 0217 Brand: SAMCO Model: F 3000 Belt sanding machine with double gooseneck and 3 motors, for wood, carpentry, metals, aluminum, composite materials, and various other materials Technical data: Table length mm 3000 Table width mm 800 Vertical adjustment of table mm 850 2-speed belt motor rpm 1400/2800 - Hp 3/4 Automatic table lifting Sanding belt length mm 8000 Sanding belt width mm 120 Gooseneck useful depth mm 600 Gooseneck height mm 200 Overall dimensions mm 4300 x 1500 x 1800 h Weight kg 740
4-position tool grinding machine Fabr. SOLID Type DS 3 CD incl. cooling device and base with adjustable tables Grinding wheel pre-grind C: 200 x 50 x 51 mm Table: 400 x 150 mm Grinding wheel regrinding C: 200 x 50 x 51 mm Table: 400 x 150 mm Grinding wheel lap cut diamond: 125 x 12.5 x 51 mm Table: 400 x 150 mm 1 grinding wheel: 100 x 8 x 51 mm 2 engine speeds: 1400 / 2800 rpm. Drive power: 0.6 kW Dimensions L x W x H/: 1120 x 1000 x 1300 mm Weight: approx. 330 kg
Key data: 400 mm, 200 mm
Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg
Key data: 1300 mm, 4 , 70 mm
IMEAS Wide Belt - Calibration and Grinding Machine Model Combi 4.4/130 Refurbished in 2020 PLATE CALIBRATION LINE According to the attached pictures. 1- Plate feeding system 1- "IMEAS" COMBI 4.4/130, with electrical control panel 1- System for unloading the plates 1- Dust extraction system, consisting of fan, socket filter and duct network Electrical cable duct for power supply Machining width 1300mm Calibration.- Abrasive belt width 1350mm Min. thickness 10mm max. thickness 70mm Final tolerance +- 0.075mm Opening height 120mm Working height 1400mm Feed speed 30m/min. Sanding belt speed 26m/sec. Compressed air 7 bar Space requirement approx. 21.5 x 5m Errors, changes and prior sale reserved
Subject to prior sale - errors possible Internal reference number: D-1143-6
Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesï» ...
Table dimensions X/Y: 400mm/800mm, max. workpiece height: 300mm, grinding wheel diameter: 300mm-350mm, weight: approx. 2000kg. An on-site inspection is possible.
Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible.
Belt grinding unit for machining the side surfaces of the workpiece with pneumatic belt tensioner. Specifications: Belt grinding unit: - Tilt device from -1° to +15° - Strap size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - With protective cover and nozzle ø 120 mm for hose connection to the dedusting system - Two-roller device for free belt grinding. Roller diameter 75 mm, wheelbase adjustable from 225 - 320 mm - Swivelling horizontal slide, travel 130 / 220 mm, actuated by handwheel - Fixed bracket for grinding unit - Feed device, pneumatically controlled, travel 5 - 20 mm Table unit: - Linear workpiece carrier table with autom. Feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working path freely programmable by the automatic machine - Track crawler for cable duct for electrical cables and pneumatic hose - Clamp ...
grinding diameter: 360 mm grinding length: 1000 mm centre height: 260 mm grinding wheel dia. x width: 500x80 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dia. of draw-in collets: 4 - 24 mm max. radius to grind: 12 mm grinding range: 4 - 24 mm grinding wheel-diameter: 100 mm total power requirement: 0,4 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1 x 0,6 x 0,4 m Function: ready for operation: Electric 380 Volt: Base with drawer: Diverse collets: Draw-off device: Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Manufacturer: Thielenhaus Model: MicroStar 284 Year of Manufacture: 2020 ( unit 1 ) 2018 ( unit 2) Power Supply: 3-phase (3~) Frequency: 50 Hz Operating Voltage: 400 V Rated Current: 48 A Control Voltage: 230 V / 24 VDC Main Fuse Rating: 63 A Certification: CE Find more here - / Contact us at -
Tripet TST201CNC nr 3520.17.137 BJ.1987
Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible.
Key data: 600 mm, 375 mm
ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future
The Zafferani FLAT 8FPE L is an electronic straight-line glass processing machine designed for grinding and polishing glass edges. Here are the key specifications of this model: ⚙️Technical Specifications of the Zafferani FLAT 8FPE L Characteristic Specification Number of grinding wheels 8 Glass thickness 3–22 mm Minimum glass size 80 × 80 mm Working height 890 mm Feed rate 0.4–3.2 m/min (16–128 in/min) Weight 2,100 kg Installed capacity 11.0 kW Power supply 230–400 Vac This machine is ideal for precision machining of glass in industrial applications, such as windows, mirrors and interior glass. 02.1.209
grinding length: 400 / 500 / 600 mm grinding width: 200 / 300 mm workpiece height: 300 / 350 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: EWAG Model: EWAMATIC sharpener with electric spindle Type of Machine : Grinding Machine Voltage: 400 Volt Frequency: 50 Hz Certification: CE Find more here - / Contact us at -
Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg
Distance between points: 1000 mm, Max external diameter to be rectified: 320 mm, Working wheel dimensions (od x id x width): Ø500 x Ø127 x 80 mm, Max internal diameter to be rectified : 200 mm, Height of points: 175 mm, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: 16GC, Maximum length to be rectified: 1000 mm, Max. piece weight: 130 Kg, Maximum length to be rectified in plongeé: 80 mm, Main engine power: 7.5 Kw / 2870 rpm, Ø min/max to be rectified: 2 - 320 mm, Total power: 30 Kw, Indoor power head: 15 Kw, Turning range: 220º, Max. revolutions of the workhead: 30 - 750 rpm, Strain: 380 V / 50 Hz, X-axis feed: 0.0001 – 5,000 mm/min, main engine: 7.5 Kw, Z-axis feed: 0.0001 – 10,000 mm/min, Air pressure: 1.5 - 3 bar, Coolant flow rate: 100 L/min, Max travel Z axis: 1050 mm, Max travel X axis: 275 mm, Max. rotation of workpiece table: 8.5º, Inner cone of workpiece ...
drill diameter: 32 mm drill diameter: 32 mm drilling length: 0 mm drilling length: 0 mm lip angle: ° lip angle: ° total power requirement: kW total power requirement: kW weight of the machine ca.: t weight of the machine ca.: t dimensions of the machine ca.: m dimensions of the machine ca.: m Universal Drill Bit Grinder lots of accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1350 mm grinding width: 660 mm workpiece height: 522 mm control: mit Steuerung surface area: 1500x750 mm magnetic cut-off: grinding wheel size: 350x60 mm turning speeds: 1500 U/min power capacity: 11 kW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding area 650x350 mm, Machine weight: 2500 kg in need of repair
Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear
SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels
grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...
Key data: 1300 mm, 150 mm
Breitbandschleifmaschine Boere wide belt sander SANDRITE 1300 C-SP-V8 Specifications: • Only approx. 100 operating hours (comes from 1-man operation) • Commissioning took place in 2021 • 1-belt machine with full equipment • Machine is still in operation • 400 V, 50 Hz, 26 A, 13 kW, 2,380 kg • 1,300 mm sanding width • Vacuum carpet • 3 – 150 mm sanding height • 70° Shore • 2.5 – 11 m/min feed speed • Pressure shoes for intermediate lacquer sanding, veneer sanding and callobaring • approx. 30 abrasive belts still available Year of manufacture: 2018 Price: €25,000.00 plus VAT Available from: immediately Terms of delivery: ex site – EXW (Kassel district) Recommendation: Drive to the loading ramp with a truck and move with a pallet truck Payment Terms: Payment before pickup Accessories without guarantee. The following app ...
Specifications: Areas of work: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 1/min Grinding area, max.: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing machine, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table-spindle center: 800 mm Table height: 900 mm Table load, max.: 2200 kg Weight, approx.: 12,000 kg Equipment: - Control Siemens SINUMERIK 840D, control panel OPO12 -System - Electro-magnetic clamping plate - Full-space encapsulation -Central lubrication - Mist extraction - Clamping system for autom. Disc replacement - Coolant device - Cooling water recooler
Vertongen M-300 Combi Through Grinder Working width 300mm Working height up to 200mm Combi unit with boot Pneumatic Oscillation Manual lifting and lowering of the workbench Two feed speeds 5.5kw main motor Sandpaper 300x1900mm Weight about 600kg
Centerless grinding machine, PARAGON RC16, 200400 G.W., through-feed grinding, under power in our warehouse (see video)
maximum number of results exceeded
please refine your search
