crank used for sale

Recon Part Number: 26.10-26/01 ground thin shaft 114.5/99.5 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

Recon Part Number: 301111 Completely standard size Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Recon Part Number: 1204 7170 Standard dimension without old stamp Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Wartsila 8R32 Crankshaft Standard sized Measurement reports available Without cracks or weldings

MaK 8M453C crankshaft Std sized Without cracks or weldings With reports available

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Mak 8M332 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

MAN 6L23/30 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

Crankcase for Mitsubishi S6R-PTA for sale. Year of Make: 2012 Power: 515KW/1500RPM

RECON - Part number 0405 2460 - Fully polished - from a new engine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Used crankshaft immediately available

New Part Number: 561 031 04 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Wartsila 12V32LN Crankshaft Suitable for 12V32 Vasa type Free Of cracks or welding With measurement reports available 1 pcs in our istanbul Stock

Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000

Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 8L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

SOLD New Wartsila W20V32 Crankshaft For Sale, Unused Also suitable for Wartsila 20V34SG engines 2 units in stock In New unused condition, from a surplus engines Other engine parts available

TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 6L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

SOLD New Wartsila 20V34SG Crankshaft For Sale Unused Also suitable for Wartsila W20V32 engines 2 units in stock In New unused condition, from a surplus engines Other engine and power plant equipment available.

Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

workpiece length: 1500 mm stroke: 0 mm swing dia.: 500 mm total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TO WHOM IT MAY CONCERN ; WE VE USED IN STANDART SIZE CONDATITION OF CRANKSHAFT OF ULSTEIN BERGEN KVGB-16 AT OUR STOCK THE CRANKSHAFT JOURNALS ARE IN STD SIZE LIMITS. IF YOU VE ANY FURTHER QUESTIONS PLS DO NO HESITATE TO CONTACT WITH US . BYE THE WAY WE VE ALSO BELOW LISTED MAJOR PARTS OF KVGB-16 ENGINES CYLINDER HEADS / PISTONS/ CON RODS / FUEL PUMPS / EXH GAS TURBOCHARGERS / OIL PUMPS / FUEL FEED PUMPS / WATER PUMPS ETC ETC AT EX STOCK. IZMIR TURKEY Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

Key data: 3000 mm, 850 mm

Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition

1x Crankshaft for Wartsila 20V34 SG NEW For Sale from Stock

Capacity (ton) 315 Table size, mm 2500 x 1250 Slider stroke, mm 400 Shut height,mm 750 Strokes per min 25 Press weight, kg 50900

SUB: FOR SALE... SULZER 6S 20 USED CRANKSHAFT AT TURKEY HAVE A GDY SIR WE VE 1 PC USED SULZER 6S 20 CRANKSHAFT AT OUR STOCK AT TURKEY. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

1x Crankshaft for Jenbacher 624. No. 444990,444989,444988 1x Crankshaft for Jenbacher 624 No. 444990,444989,444988 1x from Stock Available

Inv. Num. : 9233 Type: LUD 500/2500-F1 Producer: ZDAS Created: 1975 Parameters: Compressive force: 500 t Maximum stroke rate upper table: 20 1/min Ram stroke: 315 mm Main motor power: 55 kW

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

We offer you a Two-column crank press ERFURT Type. PKZZ1V 500 Pressing force. 500 tons Working area 2810 x 2850 mm Sliding table 2800 x 1500 mm

Hello, we offer you a Erfurt Crank Press, PKZZ 1V 500 Pressing force 500 tons Width between the uprights 2800 x 2800 mm Lifting of the ram 500 mm Adjustment of the ram 500 mm Distance between table and ram 1100 mm Table Sliding Table Table Surface 2800 x 2800 mm Technical information on request.

We offer for sale . Two-column crank press ERFURT PKZZ 1V 500/2800 TS Pressing force 500 tons Working area 2800 x 2850 mm max. tool installation height 1100 mm

Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.

Key data: 1000 mm, 280 mm

We are pleased to offer the following machine for sale: JUNKER CNC Crankshaft Grinding Machine Specifications: Swing Diameter: 280 mm Maximum Chucking Length: 1,000 mm Maximum Grinding Length: 1,000 mm Grinding Wheel Diameter: 18” Maximum Workpiece Weight: 130 kg Machine Base Weight: 13,000 kg Electrical Cabinet Weight: 1,500 kg Features: Fanuc 160C CNC Control with Junker F400 JUWOP Software Converted to JUMAT 5000/50 Oil Filtration System Coolant System and Spindle Chiller Two Grinding Spindles Vitrified CBN Grinding Wheels Two Movomatic In-Process Gauges Z-Axis Lateral Locator Electrical: 480V / 3-Phase / 60Hz / 85 kVA Price: on request The machine is available for inspection by appointment. Please let me know if you are interested, and I will be happy to provide additional information, photos, and packing/shipping details.