crank press kg used for sale

PROMESSE UFM-60 ist eine Exzenterpresse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Es liegen keine Angaben zu Arbeitskapazitäten (Durchmesser, Hub, Werkstückmaße) vor. Detaillierte technische Daten (Drehzahlen, Leistung, Abmessungen, Gewicht) sind nicht verfügbar. Die Maschine ermöglicht das Erreichen enger Toleranzen und eignet sich für Anwendungen in der Automobilindustrie, Werkzeugbau, Luft- und Raumfahrt, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

CMP 100 TOPN ist eine Hydraulische Presse, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Arbeitsdaten: Gesamtabmessungen HxBxT 1700 x 2300 x 950 mm; Maschinengewicht ca. 600 kg. Technische Eckdaten: kompakte, stabile Bauweise für stationäre Belastungen. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

STENHOJ ist eine Garagenpresse (hydraulische Presse), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten (Hub, Kraft, Werkstückmaße) richten sich nach Ausführung und Anwendung. Technische Daten variieren je nach Modell und Ausstattung. Erzielt enge Toleranzen; typischer Einsatz in Kfz-Werkstätten, Fahrzeugwartung und industriellen Werkstätten. Technische Daten ohne Gewähr

Automatic Channel Baler  Manufacturer: AVERMANN   Type: AVOS 1410-BR4-45/80 Year of manufacture 2018 Operating hours: approx. 5,000 h Technical data:   Press force: 80 t   Specific pressing force: 9.63 kg/cm² Drive power: 45 kW Idle capacity (theoretical): 226 m³/h Throughput capacities: - At 35 kg/m³ approx. 7.0 t/h - At 60 kg/m³ approx. 8.5 t/h - at 100 kg/m³ approx. 16.0 t/h    Filling opening: 1,400 x 1,000 mm Channel format: 1,100 x 750 mm Binding: 4-fold vertical Bale weight: up to approx. 650 kg   Machine weight: approx. 24,000 kg without feed belt without shredder  Subject to errors in the technical data

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 999.9 mm   sheet length min: 2000 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individua ...

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

elektrische achteraanslag elektrische diepteregeling amada tooling opname bovenaan Buigvoorbeeld: 10 mm over een lengte van 3 meter Capacity: 160 ton x 3100 mm Backgauge: elec Max stroke: 300 mm Depth of throat: 340 mm Table width: 200 mm Length: 3400 mm Depth: 2000 mm Height: 2600 mm Weight: 8 ton Capacity: 160 ton Bending length: 3100 mm

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 € : 1196.75 € : 100 to : 2550 mm : Y1 / Y2 / X Achse : 265 mm : 2200 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 11 kW : 3800 mm : 1670 mm : 2850 mm : 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

: neu : 2026 : 080186 : prompt, Zwischenverkauf v : Türkei : 81476 € : 1309.77 € : 1 : 69300 € : 135 to : 3050 mm : Y1 / Y2 / X und RAchse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 120 mm/s : 500 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 150 l : 15 kW : 4250 mm : 1700 mm : 2850 mm : 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7400 € : 142.82 € : 100 to : fix : 300 mm : 1070 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2200 mm : 1500 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 € : 1665.34 € : 220 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 140 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 4250 mm : 1770 mm : 3000 mm : 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112800 € : 2131.92 € : 220 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 11 kW : 4250 mm : 1770 mm : 2900 mm : 12250 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces fo ...

: neu : ca. 4 Monate ab Auftragse : Italien : 92000 € : 1738.8 € : 200 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 2 mm/s : 2950 mm : 2500 mm : 2600 mm : 6500 kg : horizontal verschiebbar : 2050 mm : 1450 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 € : 2407.86 € : 220 to : 4050 mm : Y1 / Y2 / X und R Achse : 265 mm : 3600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 5250 mm : 1770 mm : 2900 mm : 15000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 104800 € : 1980.72 € : 150 to : 500 mm : 950 x 650 mm : 1200 x 750 mm : 750 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3650 mm : 9500 kg : 254 bar : 32 to : 200 mm : 120 mm : 160 bar : 40 mm/sec. : 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 € : 600 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 700 mm : hydraulisch : 80 mm/s : 6,5 mm/s : 80 mm/s : 750 mm : 280 l : 2 x 11 kW kW : 7600 mm : 2650 mm : 3950 mm : 52500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 123713 € : 2338.18 € : 320 to : 4050 mm : Y1 / Y2 / X Achse : 365 mm : 3600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 18.5 kW : 5250 mm : 1770 mm : 2850 mm : 20000 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52400 € : 990.36 € : 60 to : 1250 mm : 3 (Y1, Y2, X) : 265 mm : 1050 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 900 mm : 104 mm : 100 l : 7.5 kW : 2300 mm : 1550 mm : 2850 mm : 4700 kg Standard accessories: 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear gu ...

: neu : Türkei : 70700 € : 1336.23 € : 100 to : 600 mm : 900 x 500 mm : 800 mm : 400 mm : 220 mm/s : 1 - 20 mm/s : 250 mm/s : 14,65 kW : 1900 mm : 1700 mm : 4400 mm : 6000 kg : 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 16 t throat: 210 mm stroke: 8-68 mm table:: 480 x 380 mm strokes per minute: 150 ram adjustment: 50 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 400 mm stroke: 355 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180/360 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 0416-01 / 1x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.

A deck press, also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen

Year of Make: 1998 Operating voltage: 3 AC 400 V Control voltage: 230 V Temperature range: 5 – 40 K (ambient temperature) Current Type: 3 PEN ~ 50 Hz Rated current of the system: 12 A Connected load: 5.2 kW Degree of protection: IP 54Mass (weight): 0.85 t (850 kg)

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: DELEM feed down: 100 mm/sec feed bending: 10 mm/sec total power requirement: 15 kW weight of the machine ca.: 11.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4000 mm Working height: 2550 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H: 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for mortise and tenon corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550 mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure p ...

PRESSURE GAUGE DK-T-6x12-1/2PT DENKI BIMETAL THERMOMETER MODEL: DK-6x12-1/2PT(0-200C) RANGE: 0-200C/F DIAL SIZE:6", STEMLENGTH: 12" Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

PRESSURE TRANSMITTER MODEL : MBS 3000-2011-A1AB08 OUTPUT 4-20 MA PRESSURE 0-10 BARG G 1/2" Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Baler Presona LP 85 VH2, built in 2018, including spare parts package Technical data: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Bonding 5-fold vertical, (3-fold horizontal) Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operations. The following work was carried out by us: New wear plates in the press channel Gasket completely replaced on the master cyl ...

Key data: 200 t, 3100 mm

Bending capacity 200 ton Bending lenght 3100 mm Number of axes 4

Pressure sensor, pressure transmitter, pressure transducer -Condition: Original packaging very good -Manufacturer: WIKA, Pressure transmitter type Transmitter S-11 -Measuring range: 0-600 mbar -Input: 10-30 VDC -Output: 4-20 mA -Thread: 1 inch -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 180/80/H60 mm -Weight: 0.4 kg

Description Item # 9369 - COCOA BUTTER PRESS FILTER HOLDING PLATE Manufactured by GSR (Italy) Vertical Press for the filter holding plate mounting Model PMT Year 2013 1.1kW, 400Volts, 50Hz The press for the filter holding plate mounting series PMT has been designed to ensure an easy, fast and correct assembly of the filter cloths on the filter-holding plates, essential condition to guarantee a longer life of the filter cloths. This specific equipment ensures the centering of the filter cloths with respect to the plate, a proper positioning of the cloth as well as the insertion of the Teflon cord to be pressed in the seat, through an hydraulic group, for a perfect fastening of the cloths on the plate with an even tension. The double push button station with simultaneous activation system ensures a safe use in compliance with the most restrictive safety rules

Offer 26222 Technical data: - Pressure capacity 200 t - Working width 4100 mm - Passage between the uprights 3050 mm - Table width 220 mm - Projection 500 mm - Installation height 550 mm - Feed speed 80 mm/sec. - Working speed 0 to 7 mm/sec. - Retraction speed 70 mm/sec. - Plunger stroke 300 mm - Pneumatic connection - Drive 400 V / 18 kW - Space requirement approx. W 4800 x H 3150 x D 2200 mm - Weight approx. 17000 kg - with: - Swivel arm – control panel with control DELEM DA 65 Bj.2009 - Safety light barrier - Mot. Backgauge - Sharpening tool + universal die - Two-hand control panel with foot switch,

Plate dimensions: 2.200 x 1.250 mm Daylight opening: 400 mm Number of daylights: 1 St. Heating: Elektrisch Specific pressure: 2,2 kg/cm² Total pressure: 60 to Motor output: 0,75 kW Dimensions (L/W/H): 2.750 x 1.380 x 1.785 mm weight of the machine ca.: 3.000 kg safety device: Notausseil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 300 mm dayligth: 570 mm working feed: 21.0 mm/sec return speed: 200.0 mm/sec work height max.: 970 mm Control: PPS-TS Touch total power requirement: 37.0 kW weight: 27500 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Special price upon request Equipment: - CNC electro-hydraulic press brakes Intuitive, touchscreen-based user interface Easy navigation Tool and program library Control system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26235 Technical data: - Working width 4100 mm - Pressure capacity 170 t - Passage between the uprights 3600 mm - Projection 400 mm - Max. installation height approx. 400 mm - Plunger stroke 225 mm - Working height approx. 920 mm - Motor power approx. 18 kW - Oil filling approx. 300 l - Space requirement approx. W 4800 x H 2750 x D 2300 mm - Weight approx. 12500 kg - with: - Swivel arm – control panel with ESA control - for 4 axes Y1 + Y 2 , X , Z - Mot. Backgauge with mot. controlled height adjustment - Cambering - Safety – light barrier - 4-fold Univ. matrix + divided. Deer foot tool 4000 mm - Sharpening tool 4000 mm - Deer foot tool 3000 mm - V – Die 3000 mm - E.- Footswitch, - Support arms can be moved sideways

Features: Volume 3150 L Material No. V2A Max. operating overpressure 0.99 bar Total height 3000 mm Diameter 1300 mm Outer diameter 1400 mm Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Working temperature 20 C Cylinder length 2000 mm Description: Topsoil: Clapper bottom Threaded nozzle DN40 central Threaded nozzle DN40 side Check valve Cylinder: Manhole 440 x 340 oval Sample tap DN15 Ladder hooks Downward-swept CIP line DN40 with disc valve and pressure gauge Threaded welding nozzle DN25 with disc valve Cooling coil with inlet and outlet 3/4" Blind Cover Flange Neck DN125 Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with disc valve DN50 flush with the tank wall 3 profile feet with calottes - height adjustable

Motor Power 200 kw Dics diameter 6 mm Used for wood pellet production Can be inspected under power

Qty. 1 Second-hand extrusion press Mfc.: UBE Force: 8000 MT Built: 2001 Stopped: 2015 Billet dia.: 450 -560 mm Length: 500 – 1600 mm Max. extrusion pressure: 28.7 MPa, 80.39 MN (26.8 MPa, 70 MN)

Type EURO SPECIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1.5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)

Manufacturer: Wemhoener Model: DEK 06 Type of Machine: Single-Level Short-Cycle Press Year of Manufacture: 2001 Condition: Good condition, still produces occasionally Press Counter: currently 13.65 million pressings Technical Specifications: - Heating plate format: 5,700 x 2,300 mm - Plate format capacity: 5,600 x 2,220 mm - Total press pressure: 49,728 kN - Specific press pressure: 400 N per square centimetre - Working pressure: 320 bar - Maximum operating temperature: 220 degrees Celsius - Required drive power: 63 kW - Operating voltage: 400 V, 50 Hz - Tank filling: 2,000 / 4,000 litres - Pump type: 2xA2F032/61L-P6H4-2x/050R - Secondary heating medium: thermal oil - Electrical control: Siemens S7/400 PLC Output and Capacity: - Minimum cycle time: 20 seconds, equal to 180 cycles per hour in single-format setup - Minimum cycle time: 25 seconds, equal to 144 cycles per hour in do ...

Offer 26697 Technical data: - Pressure capacity 320 t - Working width 3050 mm - Passage between the uprights 2550 mm - Projection 460 mm - Installation height approx. 630 mm - Plunger stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - with: - swivel arm – control panel with control - CYBELEC EVA-10S ; Y 1 + Y 2 ; X , R , Z - Mot. Backgauge - Mot. Crowning - Safety – light barrier - E. footswitch - 4-fold universal die split - V – Matrices - Split sharpening tool set, various other tools

Fully automatic baler Manufacturer: EUROPRESS Type: 6000 V5 Hook lift mount Year of Make: 2013 Technical data: Pressing force: 60 t Main drive power: 2 x 22 kW Filling opening: 1,450 x 1,000 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical Machine weight: approx. 13,800 kg Bale weights: up to approx. 600 kg Transport height: approx. 2,587 mm Transport width: approx. 2,500 mm Transport length: approx. 6,645 mm Subject to errors in the technical data!

Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details.

The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible.

Key data: 500 t

Manufacturer: BUCHER-GUYER Model: AEBI 500 Year: 1969 Condition: Used Stock number: 9455 Control system: SIMATIC S 5 (CPUS 115) Compressive force: 500 t Piston diameter: 525 mm Piston rod diameter: 498 mm Stroke length: 412 mm Machine weight: 18000 kg The press underwent a complete overhaul in 1992 (hydraulics and control system). Equipment: Technical documentation Hydraulic power unit Switchgear

pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: max. 45 Hub/min table plate: 1000 x 720 mm ram surface: 750 x 380 mm daylight: 330 mm weight of the machine ca.: 8,7 t dimensions of the machine ca.: 1270x2310x2595 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 t stroke: 20-150 mm ram stroke - adjustable min/max: 20 - 150 mm table-size: 1780 x 1250 mm ram surface: 1500 x 1000 mm total power requirement: 75 kW weight of the machine ca.: 46 t - Installation height with max. stroke at bottom adjustment at top 500 mm - Passageway in the table : 1200 x 300 mm - Milling in the table : 1300 x 400 x 80 mm - Infinitely variable stroke rate : 20 120 Hübe min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available. Technical Specifications Stroke Power 500 kN (50T) Table area: 940 x 580 mm Tool length max. 950 mm Operating hours 49637 Strip width: Max. 202 mm Machine dimensions: 3100 x 2700 x 1800 m ...