crank press kg used for sale

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Year of delivery: 1994 Factory number: 035-021/73 Nominal force: 100 kN Permissible delay time: 118 ms Safety distance hand control tool: 190 mm Table dimensions: 500 x 400 mm Passage: approx. 100 mm incl. A thermoforming device with foot pedal

Table dimensions: approx. 190 x 110 mm incl. installed tools

Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance

Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

Serial number: 042-024/51 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220/60V Connection: 17 kW Nominal current: 80 A Nominal force: 1000 kN Operating pressure Speed: 200 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between table and plunger: 800 mm Table dimensions: 900 x 560 mm

with mounted punching tool

Key data: 200 mm

used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump

Equipped with 10 crimp sets; unused

Equipped with 10 crimp sets; unused

Machine number: 3-0512 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 160 mm incl. installed punching tool

two pieces of different designs

Length approx. 1800 mm; WILA NS Recording

Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool

Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves

Equipped with 3 crimp sets; unused

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.

25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

52,100 LITRE RIEGER SPARKLING WINE PRESSURE TANK / STORAGE TANK 8 BAR WITH SIDE MIXER, ROUND STANDING MADE OF V2A / SADDLE TANK https://eurolux.de/product/24-0515euba-52100-liter-rieger-sektdrucktan k-lagertank-8-bar-mit-seitlichem-ruhrwerksmixer-rund-stehend-aus-v2a-s atteltank Manufacturer: RIEGER Wall thickness cylinder 11 mm Surface inside 2B=IIIC sanded Surface marbled on the outside Volume 52100 L Material V2A (AISI 304) 1.4301 Total height 8000 mm Cylinder height 5500 mm Diameter 3250 mm Operating pressure 8 bar Working temperature 20 C Agitator Propeller Stirrer Vertical design Number of feet 5 Parts in contact with the product: Yes Last Use Food Technical Documentation Yes AS UNI-RILL 047-500 Topsoil: Klöpperboden 4 crane eyelets downward CIP line DN 50 with flange connection with pressure line DN 25 Tank cylinder: Manhole ovall 35 ...

Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

Key data: 10 t, 300 mm, 300 mm

more info on request

Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System  Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on  ...

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.

Machine number: 2-0538 Compressive force: 28 kN Stroke: 12 Table dimensions: approx. 200 x 160 mm incl. installed punching tool

Machine number: 2-0513 Compressive force: 28 kN Stroke: 60 Table dimensions: 200 x 160 mm with pneumatic punching tool mounted

equipped with manual crowning and 1 set of flatbed tools; Recently equipped with new control and laser security

Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

including 1 set of tooling

Wheel diameter: 800 mm Table dimensions: 370 x 230 mm

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm

Machine number: 2810292 Operating voltage: 380 V Connection: 1.5 kW Max. pressing force: 250 kN Projection: 190 mm Plunger strokes: 120/min Plunger adjustable: 5 mm Stroke adjustable: 4 - 60 mm Table dimensions: 550 x 430 mm incl. straightening device from the manufacturer REBENDER

ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons

Including various tools;