133,684 used machines on RESALE, but how to find them? Machine Search
TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...
Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600
PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...
Technical data Weingarten Mechanics Press 1600 to Nominal press force from 20 mm before UT 16000 kN Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min Setup stroke number 5 - 10 stroke/min Plunger stroke 600 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 1150 mm Table top dimensions, length x width 3600 mm x 23 Plunger plates dimensions, length x width 3600 mm x 23 Passage between uprights in length 3650 mm Passage between the uprights in the width of 2300 mm Transfer height above press table 750 mm Quick Tension Plunger Plate: Swivel voltage, stationary 4 pcs. on each side Tool clamping flange thickness 70-0.2mm Clamping force ...
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Extension: 105mm, with accessories. including table Auction-ID: A1-49001-15
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.
Capacity (ton) 315 Table size, mm 2500 x 1250 Slider stroke, mm 400 Shut height,mm 750 Strokes per min 25 Press weight, kg 50900
Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz
Inv. Num. : 9233 Type: LUD 500/2500-F1 Producer: ZDAS Created: 1975 Parameters: Compressive force: 500 t Maximum stroke rate upper table: 20 1/min Ram stroke: 315 mm Main motor power: 55 kW
Hello, we offer you a Erfurt Crank Press, PKZZ 1V 500 Pressing force 500 tons Width between the uprights 2800 x 2800 mm Lifting of the ram 500 mm Adjustment of the ram 500 mm Distance between table and ram 1100 mm Table Sliding Table Table Surface 2800 x 2800 mm Technical information on request.
We offer you a Two-column crank press ERFURT Type. PKZZ1V 500 Pressing force. 500 tons Working area 2810 x 2850 mm Sliding table 2800 x 1500 mm
We offer for sale . Two-column crank press ERFURT PKZZ 1V 500/2800 TS Pressing force 500 tons Working area 2800 x 2850 mm max. tool installation height 1100 mm
Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.
MWM TBG 234-V12, MWM TBD 234-V12 2 piece crankshaft, recon incl. gear and counterweights TN: 1216 3119 / 6.234.0.140.016.6 1st stage Price/piece: € 4,250.00 (ex works) Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
2x crankshaft, recon incl. gearwheel and counterweights PN: 1216 3119 / 6.234.0.140.016.6 2x 1st step Price/each: € 4.250,00 Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- Sales to commercial customers only! ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
Crankshaft Recon Completely ground to 1st level: 0.025'' Tn. 6L7500 Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
FOR SALE STANDARD SIZE MEASURMENT CRANKSHAFT OF MAK 6M 332AK TO WHOM AT MAY CONCERN; THE CRANKSHAFT HAD BEEN PUT ON V BLOCK AND FOLLOWING TESTS HAD BEEN CARRIED OUT. -Main and crankpin journals measurements had been carried out. -MPI test had been carried out and no. crack had been observed. Crankshaft were found typical. -Run-out measurement had been carried out found in good order. -Hardness test had been carried out to all crankpins and main bearing journal. All values had been found in permissible limits. -Crankshaft had been polished. CRANK SHAFT READY TO TRANSPORT AT IZMIR - TURKEY. WITH FULL SEVICE REPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY ...
Recon Part number: 1230 2078 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Standard size Part number 1213 5136 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON -completely polished on 1st level -incl. weights Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T
RECON MWM TBD604 BV16 / TBG604 BV16 9190150117 - fully polished, on standard size 150/125 mm - part number 1208 7576 = 1213 5133 - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON 9190150128 - Completely sanded on 1e level undersize 123,75/97.75 mm - part number 0400 1106 - incl. counterweights and gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Standard size part number: 1230 2056 = 1507 7534 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON C-Version Polished Ground bearing standard measure 155 mm connecting rod pin standard size 145 mm Incl. Counterweights and Gear Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us.
RECON Part number: 6.440.0.140.036.4 -completely on 1st level 199.5/174,5 mm polished -incl. DNV GL decrease by 2015 -incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 245831 / 245833 - Standard size 180/150 mm - E-version - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 1213 5131 / 1213 5135 GL-test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON 1st level sanded ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 1216 0857 = 6.232.0.140.044.6 complete 0.25mm undersize ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
maximum number of results exceeded
please refine your search
10 € 
