Manufacturer:
(Category: 1405)
Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg
K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg
TOC 900 kg vacuum lifter was built in 2021 in Poland by Przedsiębiorstwo HAK Sp. z o.o. The device, designed for lifting parts with a flat surface, is an irreplaceable tool in, among others, the handling of industrial machinery. An electricity-powered vacuum generator is located directly on its design, significantly reducing operating costs compared to pneumatically powered pumps. Furthermore, the OC-900 vacuum lifter is extremely versatile and can be mounted on the hook of any lifting device. Technical specifications of the TOC 900 kg vacuum lifter - maximum lifting capacity: 900 kg - maximum lifting area (L x W): 7000 x 2000 mm - minimum lifting area (L x W): 1000 x 500 mm - suction cup diameter: 250 mm - suction cup number: 10 - main beam length: 6000 mm - main beam cross-section: 80×80 mm - crossbeam length: 1200 mm - crossbeam cross-section: 40×40 mm - handle length: ...
ABUS-Einträger-Laufkatze Typ GM3100 / ABUS single-girder trolley type GM3100 Load capacity: 10 t Hakenweg / Lifting height: 10 m Reeving: 4 / 1 Lifting speed/lifting speeds: 0.66/4 m/min Zwei Fahrmotoren / Two travel motors Linear actuator and the contactor box damaged Einsatz auf Ein-Träger-Laufkran Typ ABUS ELK / Use on single-girder overhead traveling crane type ABUS ELK Price ex works, loaded Please do not hesitate to contact us for further information.
Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book
Crane frame 6800 mm This frame for cranes offers you the possibility to attach your crane and a trolley, as well as hanging scales or other hanging lifting equipment A-shaped supports for the necessary stability. Supports: Square tube 80 x 80 mm Double T-beam: 120 x 85 mm Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow More items - new and used - can be found in our shop! International shipping costs on request!
Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book
Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg
DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Headliner (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: laterally 3 meters and forward/backward 2 meters Steel beams: included in the offer Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Su ...
capacity: 5 t condition: gut amount: 2 auf Lager Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: DEMAG : . : 20 Euro .The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: ca. 1988 arm length: 2000 mmweight max. in kg: max. 1000 kgheight of hook: max. 2000 mmWITHOUT LIFTING DEVICE: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 2.200 mmheight of hook: 2.600 mmweight of the machine ca.: 1,8 tweight max. in kg: 1000 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mieth Maschinenhandel
