133,937 used machines on RESALE, but how to find them? Machine Search
FOR SALE STANDARD SIZE MEASURMENT CRANKSHAFT OF MAK 6M 332AK TO WHOM AT MAY CONCERN; THE CRANKSHAFT HAD BEEN PUT ON V BLOCK AND FOLLOWING TESTS HAD BEEN CARRIED OUT. -Main and crankpin journals measurements had been carried out. -MPI test had been carried out and no. crack had been observed. Crankshaft were found typical. -Run-out measurement had been carried out found in good order. -Hardness test had been carried out to all crankpins and main bearing journal. All values had been found in permissible limits. -Crankshaft had been polished. CRANK SHAFT READY TO TRANSPORT AT IZMIR - TURKEY. WITH FULL SEVICE REPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY ...
used
<br><br><br>Still in operation: Yes<br>Available: immediately
used
bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort
10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons
folder creaser gluing machine double crease head, 1 head to use for perforation as option 3 folding pockets + gate fold glue system Format 50x100cm up to 480 grams machine very well suited for covers with flaps, heavy stock gate fold brochures etc optional pocket folding possible MHGraphics is Fidia dealer. we can organise installation and instruction by trained mechanic Available: immediately/sofort
Recon Part number: 1230 2078 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Autumn HR rapid 15 cream maker, old model with double jacket, beaters and Stainles. Heating is untested, as the jacket is not filled. Machine is equipped with stepless speed regulation. Scraper for boilers is not to install. Machine should be checked by time.
RECON Standard size Part number 1213 5136 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
used
Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T
RECON MWM TBD604 BV16 / TBG604 BV16 9190150117 - fully polished, on standard size 150/125 mm - part number 1208 7576 = 1213 5133 - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
For sale crown corks press SACMI. Type PTC 170 produced 2006 year. Sheets 811,5 x 564,8 mm. Perfect condition.
RECON 9190150128 - Completely sanded on 1e level undersize 123,75/97.75 mm - part number 0400 1106 - incl. counterweights and gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON -completely polished on 1st level -incl. weights Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Standard size part number: 1230 2056 = 1507 7534 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
RECON C-Version Polished Ground bearing standard measure 155 mm connecting rod pin standard size 145 mm Incl. Counterweights and Gear Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us.
Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...
RECON Part number: 6.440.0.140.036.4 -completely on 1st level 199.5/174,5 mm polished -incl. DNV GL decrease by 2015 -incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.
Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...
RECON Part number: 245831 / 245833 - Standard size 180/150 mm - E-version - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Crane hook Capacity: 80 tons Crane hook fully functional, but not suitable for our use.
RECON Part number: 1213 5131 / 1213 5135 GL-test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON 1st level sanded ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 1216 0857 = 6.232.0.140.044.6 complete 0.25mm undersize ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 312844 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm
RECON - pn. 0405 2497 - standard size, polished - flange diam. 178mm - incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine ...
RECON Part number: 0215 3299 incl. GL test Diam.: 123,50mm / 97,75mm (2nd/1st stage) incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
used MoCo shredder main machine with gearbox and motor 7,5 kw
WCB Ice Cream freezer Freezing, mixing and whipping of mix and air to ice cream. Scraped surface freezing of other products. The Technohoy MF Freezers are self-contained with built in refrigerant units. They are designed for use with cooling water up to + 25 degC. Manufacturer: WCB Ice Cream A/S Type: MF50 Model year: 2002 Capacity: 20 – 80 liters / h Material: Stainless steel Electricity: 3 x 400 v., 50Hz, 32 A, 9 kW Refrigerant: R404A, 3.75 kg Compressed air: 50 liters / min, 6 bar Cooling water 0.5 – 1.3 m3/h, 30 L Machine dimensions: Length 1200 mm, Width 650 mm, Height 1600 mm Weight 600 kg Cooling part Built-in cooling system Cooling cylinder Closed rotor Piston pump, valve Rotor speed control Pump speed control Air flow Digital display Mass flow L/min Air flow L/min Ice cream temperature C Mass quantity Rotor speed rpm The machine has bee ...
Crankshaft Deutz BV12M 628 NEW Part number: 0406 2874 -all main journals sanded to 1st step level 209, 50 mm -all connecting rod pin standard dimensions: 175 mm -without counterweights and gear -incl. GL test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h
FOR SALE. USED 320 CYLINDER HEADS. FIRST TIME OF THE ENGINE. THESE HAVE NOT BEEN RECONDITIONED BEFORE AND ARE READY TO BE RECONDITIONED AND USED AGAIN. NO CRACKS, NO DAMAGE. IN VERY GOOD CONDITION AND CLEAN AND PRESSURE TESTED. WE HAVE 40 PCS. PRICE ON REQUEST. EX-WORKS UK WE ALSO HAVE 320 BLOCK, CRANK SHAFT-2 PCS IN EXCELLENT CONDITION AND MANY OTHER USED 320 PARTS FROM DISMANTLED/DECOMMISSIONED ENGINES.
TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...
28 fields pallet rack with 2 truss levels each - 29 stands / 112 trusses - Truss length 2.70 m - Load per level 2.4 tons - Shelf height: 3.50 m depth 1.10 m -Dismantled - all small parts (screws, locking pins, feet/floor plates etc.) new! Item location: Bavaria (Rosenheim area) / Germany / Hesse (Fulda area) / Germany / Tyrol /Austria Prior sale is reserved ______________________________________________________ Freight / Delivery Current non-binding estimated freight costs for the German federal territory amount to 450 euros. Delivery time up to approx. 4 weeks Shipping throughout Europe by arrangement and mail confirmation. Commercial customers from EU countries (Austria, Italy, etc.) with a corresponding VAT number (e.g. AT/IT) will each receive a net invoice. Assembly On request, we will also be happy to make you an offer for the assembly. Contact ...
Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price
Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet
maximum number of results exceeded
please refine your search
