cr used for sale

We offer a Microslicer BMC125-7.5 food machine for the production of flowable products and bulk materials. It is ideally suited for fine shredding and emulsification for meat, sausage, confectionery and delicatessen production. Application examples: - Emulsification of sauces and dressings in circulation, such as desserts, sauces, emulsions, dips, mayonnaise, ketchup, pastes - Production of boiled sausage and cooked sausage meat, rind emulsion - Crushing and straining of fruits and vegetables - Nut and almond crushing - Crushing of biscuit and chocolate curds The machine consists of a 50 litre hopper incl. lid with an agitator incl. scraper and a knife for pre-shredding, a contactless 125mm cutting set (rotor-stator principle, 3,000 rpm, 0.5mm cutting gap), a motor block with a powerful 7.5 KW motor (400 volts) incl. 6m cable and 32A plug, a round spout optionally for liquids  ...

Used hood rinsing machine HOBART, type: UXS-10NB -In very good condition- - It has not been used for 4 years now, but everything has been technically checked again - 3 Automatic programs - Automatic tank filling - Complete and ready to connect - Inlet and outlet hoses - Tank heating, drain pump, flushing basket all in order - Incl. dosage for cleaning agent and rinse aid - incl. operating instructions - EL. Connection: 400 V, 50 Hz, 3/N, 15.6 kW, 24.8 A - Protection class: IP X4 - Dimensions: W 78 x H 198 x D 95 cm Visits and test runs are possible by arrangement.

Crick Tire 80 Tons, never used packed in its original   packaging Overall dimensions: 1200 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-49495-185

Self-leveling cross laser. Designed to project slanted diagonal lines at any angle, thanks to the locking function. Auction-ID: A7-49495-167

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-49495-32

Crick Tire 80 Tons, never used packed in its original   packaging Overall dimensions: 1200 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-49495-351

Self-leveling cross laser. Designed to project slanted diagonal lines at any angle, thanks to the locking function. Auction-ID: A7-49495-67

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-49495-132

Hydraulic cable crimping pliers. This tool will help you crimp wires and connectors much easier. Auction-ID: A7-49495-19

Hydraulic cable crimping pliers. This tool will help you crimp wires and connectors much easier. Auction-ID: A7-49495-219

The 1000 kg hook scale is a professional device designed with the most demanding users in mind. Its robust construction and high precision (Class III) make it an indispensable tool in industrial and logistics environments. The large 1.12-inch backlit LCD display ensures that results are easy to read, even in difficult lighting conditions. The measuring range of the scale covers values from 0 to 1000 kg and the battery protection function signals low charge with an \"LO\" message, ensuring a long and safe run time Auction-ID: A7-49495-12

Hydraulic cable crimping pliers. This tool will help you crimp wires and connectors much easier. Auction-ID: A7-49495-119

Mini crawler excavator, model KV15, 360 degree fifth wheel rotation, seat edge control joystick, electronic controls, hammer hydraulics, various accessories, equipped with standard 400 mm bucket + 200 mm digging bucket + 800 mm bucket, never used 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2500 x 1000 x 2500 mm Weight: 1200 kg Auction-ID: A7-49495-306

The 1000 kg hook scale is a professional device designed with the most demanding users in mind. Its robust construction and high precision (Class III) make it an indispensable tool in industrial and logistics environments. The large 1.12-inch backlit LCD display ensures that results are easy to read, even in difficult lighting conditions. The measuring range of the scale covers values from 0 to 1000 kg and the battery protection function signals low charge with an \"LO\" message, ensuring a long and safe run time Auction-ID: A7-49495-212

Mini crawler excavator, model KV15, 360 degree fifth wheel rotation, seat edge control joystick, electronic controls, hammer hydraulics, various accessories, equipped with standard 400 mm bucket + 200 mm digging bucket + 800 mm bucket, never used 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2500 x 1000 x 2500 mm Weight: 1200 kg Auction-ID: A7-49495-382

Crick Tire 80 Tons, never used packed in its original   packaging Overall dimensions: 1200 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-49495-245

Crick Tire 80 Tons, never used packed in its original   packaging Overall dimensions: 1200 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-49495-270

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-49495-232

Self-leveling cross laser. Designed to project slanted diagonal lines at any angle, thanks to the locking function. Auction-ID: A7-49495-267

The 1000 kg hook scale is a professional device designed with the most demanding users in mind. Its robust construction and high precision (Class III) make it an indispensable tool in industrial and logistics environments. The large 1.12-inch backlit LCD display ensures that results are easy to read, even in difficult lighting conditions. The measuring range of the scale covers values from 0 to 1000 kg and the battery protection function signals low charge with an \"LO\" message, ensuring a long and safe run time Auction-ID: A7-49495-112

Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 – 6,300 mm Input thickness: 12 – 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany

Cross-section milling machine Festo Universal profiling cutter Type: UP 65 Milling finger tines and finger joints Cross-profiling in endless cycle succession Milling depth maximum 65 mm Maximum working height 100 mm Tool clamping width 200 mm Support table length x width 657 mm x 272 mm Motor power 7.5 kW Speed of the milling spindle 4,300 rpm Tool flight circle maximum 250 mm Milling spindle diameter 40 mm Cutting speed 56 m/sec. Working cycles maximum 8 per minute Air consumption per work stroke 14 NI (standard liters) Cutting cross-section per stroke maximum 60 cm² Air requirement 20 m³/min. Extraction connection 1 x 250 mm x 140 mm, 1 x 120 mm diameter Speed of table movement up and down can be regulated Weight: 300 kg L x W x H : 850 mm x 700 mm x 1,170 mm

Mobile jaw crushing plant Kleemann Mobicat MC 110 Z Year of manufacture 2007 Operating hours approx. 8600 UVV up to 23 Crushing performance depending on material Approx. 330 t/h Accessories: Magnetic separator Feed size max. 1,050 x 650 mm Crusher inlet 1,100 x 700 mm Transport width 3,000 mm Transport length 14,900 mm Transport height 3,600 mm Transport weight 39,500 kg Price from location near Magdeburg

Pillar slewing crane type LS 200 - Abus Load capacity 1000 kg Column height 3100 mm Projection 3000 mm Dimension UK boom 2600 mm Year 1998 Crane classification - DIN 15018 H2B2 Corridor operation via push-button button Control - electric Cat landing gear - by hand Hoist - Chain hoist - Abus GM 3 1000.4-211 F4 Lifting speed 4.00 / 1.00 m / min original crane book Column and boom overhauled and repainted Power Flat Cable - new Foundation Plate Btto 380 kg

Manufacturer: FABO Year of Manufacture: 2026 Model: FTI-110-S Technical Specifications: - Total Power: 284.66 kW - Weight: 50000 KG - Width: 3275 MM - Length: 16706 MM - Height: 3635 MM - Color: RAL 7021, RAL 1033 - Frequency: 50 Hz - Voltage: 380 V - Current: 540 Amper - Generator Fuel Type: Diesel - Generator Power: 360 kVA - Generator Frequency: 50 Hz - Generator Voltage: 400 V - Motor Number: 7460605 - Operating Hours: approximately 500 hours

Creation Technique Multibox M06-2MB-B Carton Erector Packaging Machine Multi-format automatic carton/tray erector capable of 1,000 trays/hour, forming 300-400 x 80-150 mm cartons (expandable to 400-600 x 150 mm), using hot-melt gluing and a robust servo-driven forming system. Auction-ID: A1-48805-35

With C-Stic cryo level gauge Auction-ID: A1-48959-570

Creation Technique Multibox M06-2MB-B Carton Erector Packaging Machine Multi-format automatic carton/tray erector capable of 1,000 trays/hour, forming 300-400 x 80-150 mm cartons (expandable to 400-600 x 150 mm), using hot-melt gluing and a robust servo-driven forming system. Auction-ID: A1-48805-36

Demag D-TS360 Jib Crane, 5 ton capacity Floor Mounted 5 ton, 7 meter reach, 360 slewing pillar-mounted jib crane Auction-ID: A1-48805-111

Installed at this location in 2022, level controller type M505CE Auction-ID: A1-49790-1549

Multibox M06 PCK Carton Erector 1,000 trays/hour capacity With ITW Dynatec hot melt gluing Auction-ID: A1-48805-14

Greation Technique Multibox M06-2MB-B Carton Erector Auction-ID: A1-48805-12

With C-Stic cryo level gauge Auction-ID: A1-48959-568

With C-Stic cryo level gauge Auction-ID: A1-48959-569

Key data: 1000 mm, 280 mm

We are pleased to offer the following machine for sale: JUNKER CNC Crankshaft Grinding Machine Specifications: Swing Diameter: 280 mm Maximum Chucking Length: 1,000 mm Maximum Grinding Length: 1,000 mm Grinding Wheel Diameter: 18” Maximum Workpiece Weight: 130 kg Machine Base Weight: 13,000 kg Electrical Cabinet Weight: 1,500 kg Features: Fanuc 160C CNC Control with Junker F400 JUWOP Software Converted to JUMAT 5000/50 Oil Filtration System Coolant System and Spindle Chiller Two Grinding Spindles Vitrified CBN Grinding Wheels Two Movomatic In-Process Gauges Z-Axis Lateral Locator Electrical: 480V / 3-Phase / 60Hz / 85 kVA Price: on request The machine is available for inspection by appointment. Please let me know if you are interested, and I will be happy to provide additional information, photos, and packing/shipping details.

CNC FIDIA CXR Axis Travel: X mm 2500 Y mm 1000 Z mm 1200 rapid feedrate mm/min 15.000 TABLE: Dimensions mm 2700x900 MAx load on the table 8000 kg n. 7 T slots 22 mm RAM square section mm 390x390 spindle motor power 20 Kw SPINDLE automatic birotative milling head 1 / 3 degree Spindle nose ISO 50 Max spindle speed 4500 rpm Max torque Nm 760 EQUIPPED WITH: n.2 chip conveyor Movable and rotating operator panel Cooling unit Auction-ID: A1-48745-14

With mobile undercarriage and protective gloves Auction-ID: A1-49790-1237

Installed at this location in 2022, level controller type M505CE Auction-ID: A1-49790-1550

Including toiletpaper, Stainless steel Falcon dispencers etcetera, total length of various shelving approx 12.45 meter Auction-ID: A1-49790-1548

level controller type M505CE, including severall loose parts Auction-ID: A1-49790-1557

With mobile undercarriage and protective gloves Auction-ID: A1-49818-1237

Installed at this location in 2022, level controller type M505CE Auction-ID: A1-49818-1550

level controller type M505CE, including severall loose parts Auction-ID: A1-49818-1557

Including toiletpaper, Stainless steel Falcon dispencers etcetera, total length of various shelving approx 12.45 meter Auction-ID: A1-49818-1548

Installed at this location in 2022, level controller type M505CE Auction-ID: A1-49818-1549

ID3854 Metso C80 year/Year of construction 2008 Jaw crusher, feed opening 800 x 510 mm, shaft is seized, incl. 4 spare crushing plates, housing repaired, machine is complete in terms of parts (flywheel, drive pulley, motor, bearing housing, covers), machine is disassembled. Jaw crusher, inlet opening 800 x 510 mm, shaft is fixed, incl. 4 spare crushing plates, housing repaired, machine is complete on parts (flywheel, drive wheel, motor, bearing housing, covers), machine is disassembled

Radius 6 m Load capacity 250 kg YOC 2004 Chain hoist Demag DC Com 2 complete with wall bracket, power and control cable Btto 300 kg

Includes plastic storage box and various accessories. Auction-ID: A1-49846-421

Auction-ID: A1-49846-380

Auction-ID: A1-49846-319