cr used for sale

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

NEW, 219 kg weight, 2 cylinders, with Euro mount

NEW, - 150cm width, - 219 kg dead weight, - 2 cylinders, with Merlo mount, photos are only an example !

NEW, 100 cm width, 125 kg heavy, with Weidemann attachment - 670 mm attchment width, 322 mm attachment height

NEW, opening width 1350 mm, 8 teeth, 385 kg, suitable for Kramer mounting (86.5 cm mounting width), with standard hydraulic couplings, surcharge for plug-in connectors & socket flat sealing: € 60, - net, with various mountings suitable for e.g. Euro, Bobcat , Merlo, JCB, Terex, Manitou, Schäfer, Weidemann etc. available

arm length: 3600 mm total column height: ca 5500 mm weight max. in kg: 1000 kg travel of hook: 3000 mm height of hook: ca. 4000 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2016 - technically efficient, ready to work – after full service - profile supports - lowered thrust unit

Crushing plant Husmann HL Uni 7.5 BJ 2024

Filling line for cream Manufacturer: Kugler Type K 54 R Masch.-Nr. 12943 Composed of: 1x rotary table 1x Kugler filling machine, type K 54 R single-digit, built in 1983 with transport pin belt and sealing device Hopper for lids including feed and support, currently designed for filling into cans Lid Screwdriver Inkjet printer EBS 6000 Straffbanderolierer, Fabr. Pest Pewo Pack Type 450 SN including shrink tunnel Film width 30-450 mm Film thickness 0.02-0.1 mm Roll diameter max. 300 mm Film type: PE

Rotor Dia. x W: 1.300 x 1.300mm. - Inlet: 1.360 x 1.000mm. - With 160KW E.Motor and Control-cabinet with soft-starter - New spare-parts in stock.

Rotor Dia. x W.: 1.300 x 1.340mm. . With E.Motor and Inlet.

Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors

Cross rung milling machine Make Stegherr Type KSF 2/4 with milling cutters Suitable for milling cross bar joints on e.g. windows, doors and furniture equipped with 3 milling units one upper and one lower milling unit each mill the two mitre-like recesses in unison and a third aggregate at the same time the plating The machine table is moved pneumatically-hydraulically. The forward and return speed is adjustable. With foot control 2 motors each approx. 2.2 kW Connected load approx. 4.5 kW Pressure 6 bar Voltage 380 V 50 Hz Suction nozzle diameter 180 mm

Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.

Mach. No.: AD 26953 - Motor: Scania - Rotor size: 1.400 x 1.500mm - Included: Conveyors, Overband Separator, Dumpbunker, Feeders, Pre-screen and Hydraulic openingssystem

Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor

Overhauled, with hydraulic-unit, electrical motor and voith turbo coupling. Without frame

Inlet: 1.320 x 680mm. - With Frame, Pre-screen, E.Motors and Spare-jaws.

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted

Inlet size: 1.020 x 700 mm - Rotor W x Dia.: 980 x 1.260 mm - With Electrical motor

Rotor Dia. x W.: 1.000 x 680mm. - Inlet: 690 x 350mm. - Included: 55KW E.motor, control-unit, hydraulic-unit and frame. New spare-parts in stock.

Inlet size: 1.200 x 900 mm - With electrical motor, Inlet and many spare-parts

Inlet size: 400 x 130 mm - With electrical motor - With/without frame - 6 Pcs. (3 sets) new jaws - Crusher will is overhauled, sandblasted and painted

Inlet size: 600 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

Inlet Size: 1.800 x 1.400 mm, Included electrical motor and new jaws.

Inlet size: 820 x 640 mm - With electrical motor - Crusher will be sandblasted and painted

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

SPECIFICATIONS: Hopper opening: 1300 x 600 mm Installed power: 15 kW Rotor: Ø 250 mm Rotor width: 600 mm 014 Knife Screen: 16 mm EQUIPMENT: Replacement Knife

Used bread roll line LIPPELT, type: G3000-CSC -In very good bakery condition- For Kaiser and sliced rolls - Head machine SVP - 3 rows - Digital control - Pre-proofer Z-B049 - with side discharge - Stamp shapes, such as HEART stamps, are available separately from the manufacturer -El. Connection: 3x 400 V, 50 Hz, 10 A, 2.2 kW - Capacity: 2,500 - 3,000 pcs./h The system is in a very good and well-maintained used condition and is immediately ready for use. Inspection and test run are possible by arrangement.

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

Max. size= 46 x 32 cm, Availability= 122025, Input Paper standard Size: max 320 x 460 mm, min 140 × 150 mm. For longer sheets an optional feed tray is required Input Paper Weight: 110 - 350 gsm Paper Type: Uncoated paper, coated paper, laminated paper Feeder Capacity: 100mm Feeder Type: Belt suction Number of Creases: Up to 15 creases per document across the paper direction Crease Depth Adjustment: 3 steps (from control panel) Tolerance of creaser: / - 0,3 mm Memories: 30 Minimum Repeat Distance: 0,1 mm Dimensions: (LxWxH) 1262 × 618 × 1090 mm Weight: 114 kg Power suppy: 230V AC, 50Hz, power consumption 160W, 0.6A LOT Loaded in truck or container

approx. 1.400 pieces, Euro stack transport crates, SSI Schaefer, EF 6220 D1, 60x40x 22cm, with half-height opening on the narrow side - used - : Price from location: 5.250.-€ (net)! Only complete acceptance! Manufacturer: SSI Schaefer Type: EF 6220 D1 Year of manufacture: unknown Colour: red Metrics Exterior width [mm]: 400 Exterior height [mm]: 220 Exterior length [mm]: 600 Basic dimensions: 600 x 400 Inner width [mm]: 353 Interior height [mm]: 216 Inner length [mm]: 553 Usable height in stack [mm]: 196 Condition: good Available: immediately Location: NRW

Manufacturer: GZTU Type: LNE Year of Make: 2004 Lifting capacity: 8 t Wingspan (conical vertex spacing): 10.4 m Overall width: 10.6 m Travel speed: 20 m/min 400 V / 50 Hz Net weight: 3.1 t Noise level: Lm(A) ≤ 85 dB(A) With radio remote control and documentation. More information and exact dimensions can be found in the pictures.

Dimensions (L/W/H): 6400x1500x1780 mm Total power requirement: 19 kW Weight: 1800 kg Control: Arbeits- und Platzersparnis, sicherer Betrieb.Kombinierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Vetter Rotomax Turning Crane 80 to Details Type Rotomax Vetter Rotomax Load Turning Crane 80 to Machine no. 003074/1 Year of construction 2000 Load capacity 80,000 kg Net weight: 12,200 kg Wheel distance 1,600 - 6,000 mm Angle of inclination of the turning devices ß = 20 Max. torque 95,000 Nm Rotation speed 1.9 m/min Voltage UB 400 V 3 AC Control voltage Ust 24 V 1 AC incl. new slings and used slings incl. radio remote control

Condition: used,Manufacturer: Gram Equipment,Total height: 1,850,Total length: 2,100,Total width: 630,Remarks: The continuous ice cream freezer GIF-2000 (built in 2008) from Gram Equipment is a high-performance freezer that can be operated with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yoghurt, sauce, etc. The system was in use until September 2023 and was then professionally inspected for rapid

TECHNICAL DATA: Single beam system Track width: 12.9 ml Lifting height: 6 m Lifting speed: 5.00/0.83 m/min Lifting force: 2 t Installed power: 2.7 kW Voltage: 380 V COMPLETE WITH: 06 masts: 5 m each 04 Crossbars/Travel Paths: 10.35 m each

Solo Crown corker Arol with 8 capping heads capacity: approx. 18.000 bph incl. cap feeder year of manufacturing: 2019 delivery time: Oktober /November 2026 The machine can be inspected any time.

A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Stock number: 4015 TRAVERSE CRANE Manufacturer: KONE, Type: SWL 20 T KR2 Machines NO.: 93541, Year of manufacture: 1986 Specifications: Gr. lifting capacity 20000 kg Lifting height 13500 mm Wingspan 19000 mm Lifting speed 5000/300 mm/min Total power 18.5 kW Feinheiss. true Radio Controlled Length: 19.000 mm, Height: , Width: , Weight: 20.000 kg

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

Item condition: in working order Availability: immediately • Cooling • Display control • 2 motor speeds • 4 program presets Each of our cream machines is equipped with integrated cooling that keeps your cream fresh and chilled at all times, so you always get a perfect consistency. For optimal adaptation to your individual needs, the machine has several features. The disinfection system ensures hygienic cleaning of the device and eliminates unwanted germs and bacteria, which contributes to even safer use.

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

winch: inkl. lifting capacity: max. 2t. auf 2,7 Meter lifting capacity: max. 1 Tonne auf 5,3 Mete Number of working hours: 270 h electrical: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This fully automated line is designed for sorting, repositioning and palletizing mixed beverage crates and has an integrated ERP connection. - Pallet unloader Robogrip 4A-0795 - Modulpal PRO 2A pallet loader - Higher-level control - MultiCo S container transport - Pallet transport Pal CO S - Film wrapper Fabr.Haloila - 2xPallet labeller Fabr. Logopak - Network technology - Site Pilot Line Diagnostick with IT hardware - Electrical energy distributors - Technical documentation