134,831 used machines on RESALE, but how to find them? Machine Search
For sale are a total of 6 ABUS double-girder overhead travelling cranes, each with a lifting capacity of 16,000 kg and a span of 16,155 mm. The cranes date from 1990, 1999 and 2000 and are equipped with ABUS electric wire rope hoists from the GM 6160 series. Manufacturer: ABUS Crane Type: Double Girder Overhead Crane Load capacity: 16,000 kg Wingspan: 16,155 mm Hoist: Electric wire rope hoist Wire rope hoist series: ABUS GM 6160 Wire rope hoist types: GM6160F6 and GM6160L06 Years of manufacture: 1990, 1999 and 2000 Location: Heilbronn Number of units available: 6 pieces The cranes were freshly serviced in 2026, and we are happy to offer help with the expansion.
Cross-flow fan, cross-flow fan, centrifugal fan, centrifugal fan ELEKTROGERÄTE BAD BLANKENBURG QL II type QL 2/1 7020.7/1 2 stages blower motor : 25 W 220 V 50 Hz New !br / Dimensions: 190 x 120 x 150 mm
I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0815LDS Load capacity: 450 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.77 m x 1.50 m Height: 2.46 m Railing folded down Height: 1.87 m Weight approx.: 3253 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 30 % Drive via battery 8x6V / 240 Ah Integrated charger 48V/40 A Support with automatic level compensation. Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in ...
High Pressure Centrifugal Pump, Water Pump, Centrifugal Pump GRUNDFOS CRN3-3. G-V-HQQV Q =3 m3/h H = 15.1 m H max = 19.9 m P max 25 bar engine: 0.37 kW 380 / 480 V connection: 1 1/4 inch used, tested ! Dimensions: 370 x 210 x 450 mm
I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0710LDS Load capacity: 230Kg Lifting capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Extendable platform + 0.90 m Transport Dimensions 2.45 m x 1.01 m Height: 2.18 m Railing folded down Height: 1.83 m Weight approx.: 1940 Kg Working height: 8.7 m Platform height: 6.7 m Climbing ability up to: 25 % Drive via battery 24V / 260 Ah Integrated charger 24 V/ 36 A Support with automatic level compensation. non-marking chains German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA wil ...
In-line pump, centrifugal pump, water pump GRUNDFOS CRNE5-36 A-P-GI-E-HQQE Q: 5.8 m3/h H: 189.2 m H max: 248.4 m 25 bar with frequency converter ! motor: 5.5 kW 380 - 480 V New ! with operating instructions ! Dimensions: 1610 x 330 x 300 mm
I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...
MKF crane beam adjustable with motor Adjustable trusses are used when towing distances and load centres vary. Facilities & Highlights: Central suspension point: Solid triangular eye for the crane hook Electrical center of gravity correction: Electromotive drive (connection via 230V CEE plug) for balancing uneven loads directly at the touch of a button. Ergonomic control panel: Height-adjustable control unit panel on a vertical rail guide with drag chain (energy chain) to protect the cables. Clear controls: Controls for bolts (open / closed / impermissible position) and centre of gravity correction (incl. LED display for the centre position) as well as a central emergency stop switch. Transport frame included: Robust, mobile base made of square steel for safe and compliant storage. Technical data Manufacturer: MKF Helmut Möschl GmbH Payload: 9,000 kg Net weigh ...
In-line pump, vertical centrifugal pump, water pump, GRUNDFOS CRE64-1 A-F-A-E-HQQE Q: 64 m3/h H: 21.1 m H max: 31.9 m 16 bar with frequency converter ! motor: 5.5 kW 380 - 480 V New ! Dimensions: 960 x 380 x 330 mm
heavy 40s Gillardon with cross table
Working width: approx. 3600mm, load capacity: 2500kg. An on-site inspection is possible.
Stock 2 pieces fitnes astra cros Auction-ID: A7-49700-15
Crane bridge drive, bearing system drive. Sentence. 4 pcs. CIMCORP SLAVEMBR400TP 2 thereof with antrib. SIEMENS / ALPHA 1FT6102-08AH71-4SH1 / TP 110X-MF2-25 -0k1-25 ( 1FT6102-08AH71-4SH1/TP110X-MF2-25-0k1 -25 ) all rolls with cleaning system CLEAN UNIT TSN-P041K Roll dimensions: Ø 350 mm x 110 mm Disc housing: 412251 used, tested ! Dimensions: 1200 x 800 x 500 mm
A gantry crane in need of repair is offered. Load capacity: 5000kg (formerly 10000kg), Demag wire rope hoist installed, bearing worn out. An on-site inspection is possible.
Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.
Manufacturer: Metso Outotec Finland Oy Year of Manufacture: 11/2021 Model / Type: J90 Type of Machine: Mobile Crusher (Jaw Crusher) Technical Specifications: - Nominal Power: 162 kW - Mass: 22700 kg - Operating Hours: approximately 1250 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines
Dimensions 60x40x17,5 cm; stackable Auction-ID: A1-48959-705
With aluminium cryorack system Auction-ID: A1-48959-571
Auction-ID: A1-48959-81
Auction-ID: A1-49790-1079
Column swaying crane, Demag / J.D. Neuhaus, 125kg with pneumatic chain hoist – used - : Price from location: 1.500.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: J.D. Neuhaus Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Height of the column and length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp
Auction-ID: A1-49790-1076
Various dimensions, on and including 6x pallet Auction-ID: A1-48959-706
Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK
Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.
With aluminium cryorack system Auction-ID: A1-48959-572
With aluminium cryorack system Auction-ID: A1-48959-288
Optimizing Cross-Cut Saw manufactured in 2021. This OPTIMA 60SNC 6200 CE features a maximum workpiece height of 110 mm and a width of 300 mm, with an impressive infeed length of 6,200 mm. It offers a feeding speed of 60 m/min and a saw blade diameter of 450 mm. If you are looking to get high-quality cutting capabilities, consider the OPTIMA 60SNC 6200 CE machine we have for sale. Contact us for further details.
5500 SSI Schaefer Picking Crates – Front Opening with Bar Used goods, see pictures Color: Red or gray Dimensions: 60x40x40cm 20 pieces per pallet Negotiation price: € 2,- net from stock P10268 Other variants available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks
description: DRINK has one of the largest warehouse for conveyor belt systems worldwide. If you need bottleconveyors, crateconveyors, palettconveyors, trayconveyors you are at the right place. Used, new, conversion, hardware, software, layout, assembly, on-site conversion, overhaul, commisioning. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your ...
Auction-ID: A1-49790-1078
Specifications: - Saw blade dimensions 315 x 2.5 x 32 mm - 2 saw blade spindle speeds approx. 40 + 80 rpm - Cutting range at 90° around 95 mm - flat 110 x 70 mm - at 45° around 90 mm - flat 85 x 70 mm - Mitre adjustable left + right up to 45 ° - Material vise - Drive 400 V / 0.75 / 1.3 kW - Space requirement approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg
Auction-ID: A1-49790-1021
Auction-ID: A1-49790-1075
Auction-ID: A1-49790-1080
description: The paddel dirstributor allows a 1 line-> 2 line distribution. This offer does not include a distribution table (can be offered separately). The distribution is incl. paddle/ frame/ switchboard / software serial number: 041483 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technic ...
Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.
description: Content: approx. 52m crate transport straight 7st. x 90° magnetic curve 13st. x motors further information on request for 190mm chains effective width 430mm All information without guarantee transport size: 2400 x 4000 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK ...
Auction-ID: A1-49790-1077
Auction-ID: A1-49790-1020
incl. reel chassis HFW 1 and electric chain hoist EKZT 10-2
ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good
Auction-ID: A1-49790-1074
maximum number of results exceeded
please refine your search
180 € 
.jpg)
