129,243 used machines on RESALE, but how to find them? Machine Search
RECON 1st level sanded ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h
RECON Part number: 1216 0857 = 6.232.0.140.044.6 complete 0.25mm undersize ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...
---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm
28 fields pallet rack with 2 truss levels each - 29 stands / 112 trusses - Truss length 2.70 m - Load per level 2.4 tons - Shelf height: 3.50 m depth 1.10 m -Dismantled - all small parts (screws, locking pins, feet/floor plates etc.) new! Item location: Bavaria (Rosenheim area) / Germany / Hesse (Fulda area) / Germany / Tyrol /Austria Prior sale is reserved ______________________________________________________ Freight / Delivery Current non-binding estimated freight costs for the German federal territory amount to 450 euros. Delivery time up to approx. 4 weeks Shipping throughout Europe by arrangement and mail confirmation. Commercial customers from EU countries (Austria, Italy, etc.) with a corresponding VAT number (e.g. AT/IT) will each receive a net invoice. Assembly On request, we will also be happy to make you an offer for the assembly. Contact ...
RECON Part number: 312844 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Creasing/scoring/cutting machine Schöber Model A80 Year 1996 Working width 800 mm feeder can be connected to any sheet feeder or used in-line, we can supply a feeder on request as wel as a delivery belt or jogger Available direct
Used crown corks press SACMI /Italy/ type PTC 027. Perfect working condition. 27 dies, 27 strokes. Produced in Italy.
Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.
The scope of delivery includes: 01x Stacking crate / Euro container, used Manufacturer: Bekuplast Type designation: Basicline Material colour: grey Product dimensions: 600 x 400 x 320 mm (LxWxH) Internal dimensions: 567 x 367 x 317 mm (LxWxH) Volume: 64.5 l Weight: approx. 2.28 kg / pcs. Material: Polypropylene Handles: closed Front wall: foldable on one side Side version: closed Bottom finish: smooth, closed Note: -Insensitive to acids and alkalis -Cold and heat resistant It is a second-hand item, there may be scratches, dents and traces of use exist. The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place ...
RECON - pn. 0405 2497 - standard size, polished - flange diam. 178mm - incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
used MoCo shredder main machine with gearbox and motor 7,5 kw
Technical data for the crate rack: Shelving system: SSI Schaefer Type: R3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,056 mm Number of shelves / row of shelves: 01 pcs. á 994 mm Number of levels plus floor level: 07 pcs. The scope of delivery includes: 02x Shelf Stand, Choice II Material colour: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. transverse and diagonal struts The stands are unassembled 1,534 mm high 300 mm deep 07x shelves, second choice Material colour: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / piece: approx. 2.64 kg max. load per floor at Evenly distributed load: 100 kg 01x Cross Association, Second Choice Type designation: KV31013 Material colour: sendzimir galvanized ...
Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system
RECON Part number: 0215 3299 incl. GL test Diam.: 123,50mm / 97,75mm (2nd/1st stage) incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Crankshaft Deutz BV12M 628 NEW Part number: 0406 2874 -all main journals sanded to 1st step level 209, 50 mm -all connecting rod pin standard dimensions: 175 mm -without counterweights and gear -incl. GL test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
1 factory-tested, well-preserved pillar jib crane Payload 500 kg RADIUS approx. 2,300 mm Overall height approx. 2,600 mm Bottom bracket approx. 2,350 mm Hook way approx. 4,000 mm make SWF Workshop inspection, 2017 equipped with an electric chain hoist, floor operation on the chain hoist movable working speeds: Hoist around 4.0/16.0 m / min Trolley gear by hand rotation by hand
1x Romfil Crossflow filter, RF12 CSA Vario, built in 2009, 12 new modules and completely overhauled, 120 sqm filter area, capacity for wine up to 15,000 ltr./h under optimal conditions, all seals + air lines + water filter + air filter new, operation via touch panel, integrated feed pump The filter filters fully automatically and also flushes back fully automatically during filtration (time and duration can be set). Furthermore, it also does a water flush fully automatically when a preset minimum quantity falls below a preset level. This means that even a large quantity can be filtered fully automatically – without anyone having to be present. The user only has to add the cleaning agents manually during dry cleaning, there is no automated dosage. The cleaning itself then runs automatically again. In addition to smaller extras, the filter also has a slow-running impeller pump i ...
FOR SALE. USED 320 CYLINDER HEADS. FIRST TIME OF THE ENGINE. THESE HAVE NOT BEEN RECONDITIONED BEFORE AND ARE READY TO BE RECONDITIONED AND USED AGAIN. NO CRACKS, NO DAMAGE. IN VERY GOOD CONDITION AND CLEAN AND PRESSURE TESTED. WE HAVE 40 PCS. PRICE ON REQUEST. EX-WORKS UK WE ALSO HAVE 320 BLOCK, CRANK SHAFT-2 PCS IN EXCELLENT CONDITION AND MANY OTHER USED 320 PARTS FROM DISMANTLED/DECOMMISSIONED ENGINES.
Year: 1965 Make: SHELL / BADGER N.V. Crude Oil Atmospheric and Vacuum Distillation and Naphtha Stabilizer. Year of manufacture 1965 Process Design by Shell Process Engineering by BADGER N.V. Feed = Original design, paraffinic crude (21 d/month), naphthenic crude (7 d/month), after 2015 Revamp is 100% naphthenic crudes. Crude oil with Total Acid Number (TAN) up to 4,2 (TJP), 3,3 (Laguna), (range of Viscosity = 5,5 – 144 cst/100°C) Throughput max. 12.000 t/d – original design Current Process Parameters (after 2015 Revamp) Atmospheric Distillation: Throughput max. 6000 t/d Operational operating temperature = 355°C Operational operating pressure = 2,5 bar Vacuum Distillation: Throughput = max. 4500 t/d Operational operating temperature = 380°C Operational operating pressure = 0,2 bara Naphtha Stabilizer C-0807: Throughput = max. 2000 t/d Operational operating temp ...
Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price
Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet
TECHNICAL SPECIFICATIONS Manufacturer: LOKOMO Description: Semi-Mobile Crushing Plant Type: Stationary Year of construction (complete complex): 2009 Crusher Type: C 100, Single Swing Jaw Crusher Inlet opening: 1,000 x 800 mm Throughput: 150 - 200 t/h Maximum feed size: 600 mm Drive power: 132 kW Broken product: 0 - 120 mm Adjustable gap width: minimum 100 mm Feed hopper capacity: 25 t Drive power vibratory feeder: 18 kW Discharge belt: 12,000 mm length, 1,000 mm width Drive power discharge belt: 22 kW SPECIFIC COMMENT - Complete system - Designed and refurbished in 2009 (no use yet) - Numerous spare and wear parts included - Incl. hydraulic hammer type RAMMER S 25
FOR SALE... STORK WARTSILA 16SW 280 CRANK SHAFT TO WHOM IT MAY CONCERN; WE VE CRANK SHAFT OF STORK WARTSILA 16SW 280 AT OUR STOCK STANDARD MEASUREMENT WITH REPORT. WITH GEAR & COUNTERWEIGHTS. PLS FIND CRANK STAMP DETAILS ON BELOW. 1111SW 131 F013215 LLOYD S STU. 300240 6.93 STU. 9601908 YOB 1993 CRANKSHAFT READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/ aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg
Cross slide unit with 2 spindles, for conversions or adaptations
Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm weight : ca. 1500 kg different : variable speed Film and contact coating consisting of: - waffle magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device Details / different: - Vollautomatische We offer this machine in 'as is' condition, without warranty, ex Warehouse Hess. Lichtenau (EXW) unpacked
Lattice boom crane Manufacturer: Gottwald Type: AK 70 Load capacity: 70 tons Year of construction: 1961 The lattice boom crane is operational, but heavily in need of renovation.
3000 pcs plastic box SSI Schäfer 60x40x12cm New goods, see pictures Payload per crate 30 kg Outer length: 60 cm / Inner length: 56.4 cm Outer width: 40 cm / Inner width: 40.0 cm Exterior height: 12 cm / Interior height: 10.2 cm Various colours Material: Polypropylene (PP) Dimensionally stable and robust Stackable on top of each other Negotiation price: € 4,90 net per piece from stock P10275 80 pieces per pallet, size, quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. Constantly over 5000 linear metres of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock)
Lattice boom crane Manufacturer: Italgru Type: 80 tons Load capacity: 80 tons The lattice boom crane is fully functional and is still in operation! Can be visited at any time!
The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suita ...
maximum number of results exceeded
please refine your search
