cr press brakes used for sale

table length: 330 mm table width: 220 mm x-travel: 210 mm y-travel: 125 mm table height: 150 mm T-slots: 12 mm weight: 33 kg dimensions: 0,41 x 0,35 x 0,22 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A roller crusher BMD machine and a gyratory crusher Fried. Krupp (Thyssen-Krupp) are available. 1) Roll crusher BMD machine BHS Walzwerk V1-800, year of construction: 1967, general overhaul: 1981, power requirement: 30kW. 2) Gyratory crusher Friedrich Krupp Gyradisc fine crusher. On-site inspection is possible.

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On ...

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

A mobile Vetter gantry crane is available. Load capacity: 1000kg, clear width: 2100mm, height: 3000mm. Documentation available. On-site inspection is possible.

Load capacity: 500kg, reach: 2750mm, swivel range: 360°, foundation column weight: approx. 3000kg, tare weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Two fully functional Schmiedl column-mounted slewing cranes are available. 1) Schmiedl crane type 3, year of construction: 1993, load capacity: 1000kg, radius: 5000mm. 2) Schmiedl crane type 3, year of manufacture: 1992, load capacity: 1000kg, radius: 7000mm. On-site inspection is possible.

Grooving machine Foellmer 45ME Year of construction 1998 Art.Nr. L1008

MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...

Crane suspension Ring: 250x150 inside, thickness: 36 mm, Rope thickness: 22 mm Thimbles on the ring 45 mm Rope thimble inside the rope ø 45 mm Length: 4.10 m Used

Lifting crane with trolley lifting capacity 0.25t

Shredder LINI LW 40 -used-hydraulic feed, PLC control---------- Technical data ----------hopper opening: 600 x 820 mm, tricher capacity: 0.5 m³, rotor diameter: 200/250 mm, rotor length: 600 mm, motor power: 18.5 kW, weight: 1050 kg, dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, sieve holes: 15 mm

Stock number: D356, Ice crusher, stainless steel,, ALA, hydraulic working., Inlet funnel in the top., L 1100 x W 600 mm crushing house., Material: Stainless steel AISI 304

Stock number: PT3005, Lobe pump, stainless steel,, Crepaco type 4 with rubber impellers., 2,2 kW gear motor, 200 rpm., Horizontal flow., Theoretical capacity 7944 l/h., Material: Stainless steel AISI 304

Stock number: PT1012, Lobe Pump, stainless steel,, APV-Crepaco Type R2R., 0,75 kW motor, variable speed 58-348 rpm., 220/380 V., Horizontal flow., Rubber lobes., Theoretical capacity 200-1200 l/h., Material: Stainless steel AISI 304

Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg

Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book

Crane frame 6800 mm This frame for cranes offers you the possibility to attach your crane and a trolley, as well as hanging scales or other hanging lifting equipment A-shaped supports for the necessary stability. Supports: Square tube 80 x 80 mm Double T-beam: 120 x 85 mm Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow More items - new and used - can be found in our shop! International shipping costs on request!

A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible.

weight max.: 1,6 t stroke: . mm clamping width: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible.

Ice cream machine from carpigani, in working order.

Demag 3,2 ton x 20 meter

SUB: FOR SALE... SULZER 6S 20 USED CRANKSHAFT AT TURKEY HAVE A GDY SIR WE VE 1 PC USED SULZER 6S 20 CRANKSHAFT AT OUR STOCK AT TURKEY. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

The Tetra Pak Frigus 600 ice cream freezer is a specialized machine designed for the production and continuous freezing of ice cream and other frozen desserts. It plays a crucial role in the ice cream manufacturing process, ensuring the product reaches the desired temperature and texture while incorporating air to create a light and creamy consistency., Key Features of the Tetra Pak Frigus 600 Ice Cream Freezer:, - High Capacity: The Frigus 600 is designed to handle significant production volumes, making it suitable for medium to large-scale ice cream production., - Continuous Freezing Process: This machine allows for a continuous freezing process, which is essential for maintaining the texture and quality of ice cream. It helps achieve the right balance of air incorporation (overrun) and uniform freezing., - Precise Temperature Control: The Frigus 600 offers precise temperature and visc ...

E-chain hoist, electric hoist, crane GIS type PK 250 / FFabr. No: 252 243 Year of construction 1988Load capacity 2500 kgHook travel 4 metersMain lifting speed 4.1 m/min. Fine lifting speed 0.9 m/min.- 2 load trainsGood condition; used

E-chain hoist, electric hoist, crane GIS/SWF type 150 / FFabr. No: 15739 Year of construction 1970Load capacity 1500 kgHook travel 4.5 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

E-chain hoist, electric hoist, crane YALE type 5-10/10-5series. No. 8526 Year of construction 1979Lifting capacity: 1000 kgHook travel: 3 metersLifting speed: 5 m/min. Fine lifting speed: 1.3 m/min.2 load trains = 1000 kgPower supply: 380 volts, 50 Hz.- Suspension eye on the top of the crane- Control bottle with button for main lift and fine lifting material condition; used

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4

Cross table with stepper motor drivePrecision positioning systems UHLCrope table UHL type KT5-NSOCSerium No. 0008002Table size: 145 x 145 mmTable opening: 75 x 75 mmOverall height: 51 mmTravel distance: 50 mm per axisStraightness / flatness: 5 ?m- Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2- Manual adjustmentDimensions (cross table) L x W x H: 265 x 220 x 51 mmWeight: 3.5 kgvery good condition; used

E-chain hoist, electric hoist, crane STAHL type Si T 201-10/2,5No.: 1202373 year of construction 1989Load capacity 250 kgHook travel = lifting height 3.5 metersLifting speed 10 m/min. Fine lifting speed 2.5 m/min.2 load strands = 250 kgCable length of operating bottle approx. 1.4 metersMains connection 400 volts, 50 Hz.- Suspension eye on the top of the craneWeight: 22 kgGood condition; used

E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Electric hoist, crane, electric wire rope hoist, winch DEMAG type P 10Fabr. No. 941 477 Year of construction 1962Lifting capacity 2000 kg at 4 stringLifting height 5 metersLifting speed 6 m/min. Fine stroke speed 1.3 m/min. Reeving 4/1Motor power 0.6 / 2.6 kWNet connection 380 volts, 50 Hz- DEMAG hoist, type 19/11 K28P- DEMAG electric chassis, type 13 / 6 K8- 1 travel speed approx. 19 m/min- Chassis for double T-beams, beam width 120 to 180 mm- Load hook for 4 load trains- Control bottle for the hoist

E-Chain Hoist, Electric Hoist ELEPHANT / FBH (Japan) Type F(S)2-A(B4-B6)M(P-G)Fabr. No. 03278 Year of construction 1997Lifting capacity: 2000 kgHook travel 2.6 metersHood lifting speed 3.8 m/min. Fine stroke speed 1 m/min. Chain size 7.1 x 21 / quality class 8Cable length operating bottle approx. 2.5 metersMains connection 400 volts, 50 Hz.2 load trains = 2000 kg- emergency offdead weight 70 kggood condition; used

E-chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1Fab. No. 1524132 Year of construction 1997Load capacity 2000 kgHook travel 4 metersMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Load Trains 2Cable Length Operating Bottle approx. 0.9 metersNominal Power 1.6 kW / 0.36 kWNenncurrent 4.3 A / 2.5 ANetching Connection 400 Volts, 50 Hz- Suspension Eye on the Top of the Crane- Emergency StopWeight 75 kgGood Condition; used

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 035884 Year of construction 2018Load capacity 240 kgHook travel 2 metersDistance suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Column slewing crane DEMAG type KBK 1Year of construction: approx. 1980Lifting capacity 500 kgSlewing range 270Radius 2000 mmOverall height 2300 mmHeight to lower edge boom 1800 mm- Boom profile DEMAG C-profile rail KBK 1- Carriage for DEMAG C-profile rail KBK 1- Base plate crane column L x W x H = 370 x 370 x 20 mm (4 holes approx. 27 mm)Net weight 145 kg; used

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Manufacturer : FRAVIZEL Model: Lynx + Halley MFCR55 Type of Machine : wire saw systems for block mining in a quarry. Year of Manufacture: 2022 Commissioned: 2023 Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Crimper Manufacturer: Pamasol Type 2002/20 Capacity: 500-700 containers/hour The machine works pneumatically and is started with the two-hand solution. The crimping knife and crimp height can be adjusted to the desired dimension from the outside. Before closing the container, the machine presses the verntile onto the container with the set contact pressure. The contact pressure can be adjusted separately. Scope of application: container height 30-330 mm, container diameter 22-66 mm Operating pressure 8-10 bar Weight 75 kg Dimensions: 700 x 700 x 1000 mm

1x Crankshaft for Wartsila 20V34 SG NEW For Sale from Stock

Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg