127,591 used machines on RESALE, but how to find them? Machine Search
Crimping tool, cable lug crimping tool, hydraulic crimping tool -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 79 x 250 mm -Weight: 4.0 kg
Manufacturer: MKG Maschinen- und Kranbau GmbH Type: HMK340TA2 Factory No. 980-555 Year of construction: 1992 Vehicle is fully functional. Hydraulic system currently shows no leakage. Battery is in good condition. Crane vehicle can be supplied externally with high voltage current for continuous operation. Mechanically and technically in order. The wheels and castors would have to be renewed. Vehicle is now available...
Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)
Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist, crane hook crossbeam, load crossbeam -Manufacturer: Seil Becker, crane traverse -Load capacity: 100 kg -Steel rope: Ø 4 mm -Dimensions: 1015/80 / H440 mm -Net weight: 9.2 kg
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Bearer width: adjustable -Load capacity: kg -Dimensions: see technical drawing in the photos -Dimensions: 240/262/H225 mm -Weight: 12 kg
Hinged tape chains of different manufacturers, different sizes, new and used on request
Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg
Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Load capacity: 8000 kg -Dimensions: 4070/230/H770 mm -Own weight: 715 kg
Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional
Crank winch, Dunkraft, diamond jack, steel winch -Hexagon socket: 32 mm -with: counterweight -Dimensions: 730/400/H110 mm -Weight: 9.8 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 38.5 m -for electric cable winch -other crane ropes are also available -Weight: 17 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 20 mm -Length: approx. 50 m -for electric cable winch -other crane ropes are also available -Weight: 71 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 11 mm -Length: approx. 23 m -for electric cable winch -other crane ropes are also available -Weight: 13 kg
Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 20 mm -Length: approx. 50 m -for electric cable winch -other crane ropes are also available -Weight: 75 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: 9.5 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 7 rolls available -Weight: 4 kg/piece
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 24 m -for electric cable winch -other crane ropes are also available -Weight: 12 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 26 m -for electric cable winch -other crane ropes are also available -Weight: 15 kg
TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg
MAK 8M25 Crankshaft 2 pieces available in stock Standart sized Measurement report is available Tested for cracks, hardness and oscillation For further information please contact us at info@fin-marine
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 24 m -for electric cable winch -other crane ropes are also available -Weight: 14 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 31 m -for electric cable winch -other crane ropes are also available -Weight: 23 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 14 mm -Length: 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 16 mm -Length: 22.8 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 5 rolls available -Weight: 24 kg/piece
Column jib crane, overhead crane, workstation crane -Load capacity: 250 kg -with chain hoist: Demag type DKUN 1-125 K V1 F4 -Projection: 2310 mm -Total height: 1900 mm -Transport dimensions: 2400/800/H500 mm -Weight: 172 kg
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: max. 230 mm -Payload: 3000 kg -Number: 4x drives available -Price: per piece -Dimensions: 390/250/H200 mm -Own weight: 38 kg
As good as new hand groove device / creasing device, working width 355mm
Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase -Dimensions: 490/300/H70 mm -Weight: 22.4 kg
Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.
Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 450/210/H90 mm -Own weight: 9 kg
AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg
Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters
Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Crane cross member claws: 3 pieces -Crane cross beam claws: to move on the cross beam -Traverse support: 220 mm -Price: complete -Dimensions: 335/180/H350 mm -Own weight: 39 kg
TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support
Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.
CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Carrier width: 90-295 mm -Payload: 1500 kg -Number: 1x drives available -Price: per piece -Dimensions: 590/295/H225 mm -Own weight: 21 kg
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Beam width: 90-180 mm -Load capacity: 3000 kg -Number: 1x drive available -Dimensions: 320/330/H340 mm -Weight: 50 kg
TECHNICAL SPECIFICATIONS Manufacturer: HANS FEHR Kranbau Designation: Overhead crane, single-girder overhead travelling crane Type: 5.0 t Year of construction: 1979 Payload: 5,000 kg Hook path: 7.0 m Lifting speed: approx. 8 m/min Stroke speed. at fine stroke: approx. 0.8 m/min Total crane length: 11,300 mm
Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg
Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)
5 x rack rows pallet racks, 5.5 m high, each 3 fields (2700), each 3 truss levels - 20 frames / 90 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 5.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 2 rolls available -Weight: 10.5 kg/piece
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 11 mm -Length: approx. 27 m -for electric cable winch -other crane ropes are also available -Weight: 15 kg
HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading
maximum number of results exceeded
please refine your search
