We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,626 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.
used
Opening: 1,500 x 800 mm, diameter: 800 x 800 mm, tooth height: 150 mm, weight: approx. 18 t., 2 x E-motor, ideal for crushing gypsum and clay
used
Cone diameter: 2,100 mm!, feeding size: 0-140 mm, gap: 10-60 mm, capacity: approx. 600 t/h (0-20 mm), up to 800 t/h, E-motor 250 kW, many spare parts, completely with basic frame, approx. 100 t.; hydraulic unit in extra 20ft container currently dismantled into parts, but ready for transport
used
for TBD441-V12 MWM and TBG441-V12 MWM 1x crankshaft, recon completely polished on 1e step (0.50 mms) incl. counterweights Price/each: € 20.000,00 Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- Sales to commercial customers only! ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
used
MFL-VORTEX, opening: approx. 1,030 x 720 mm, rotor diameter x rotor width: 1,000 x 1,000 mm, feed size: approx. up to 400 mm , capacity: - 110 cbm/h, weight: approx. 13 t.
LENGTH OF BILLETS: 9.0 M, DIA.: 160 MM,
used
used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no
1070 x 1480 mm
used
Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.
used
Used jaw crusher Makrum company, type 40.17 Specifications: 1.Wielko inlet -800x1000 mm. 2. The adjustment range of the gap outlet - 80/18 mm. 3. Max. the size of the input material - 750 mm. 4. Performance - 35-90 m3 / h 5. The power of 75 kW drive motor. 6. The weight of the largest unit 14 T. 7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.
used
Mounting crane for wheel loader O&K Type.L8-1 Extendable up to 3m.
used
Double toggle jaw crusher, opening: 1200 x 900 mm
WEBER SCALE DATAPOND 85-AB Capacity 200 t / h complete pre and post container immediately available Mob. + 491715213204
used
1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min
used
tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...
used
1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min
used
1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min
used
1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min
used
1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min
used
1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min
used
1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min
<br><br><br>Still in operation: Yes<br>Available: immediately
used
folder creaser gluing machine double crease head, 1 head to use for perforation as option 3 folding pockets + gate fold glue system Format 50x100cm up to 480 grams machine very well suited for covers with flaps, heavy stock gate fold brochures etc optional pocket folding possible MHGraphics is Fidia dealer. we can organise installation and instruction by trained mechanic Available: immediately/sofort
bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort
used
SACMI line for crown corks.
used
Cat.-No. 14-00203 in a very much good condition SP Pantene Packaging 200ml 400ml 150ml 200ml flip top jar 300ml Bullet jar All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice.
Slow runner with sliding floor 800 mm wide rotor 22 kw engine
used
SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
used
Used hammer mill (impact crusher), model 97.58. Overall dimensions: Length 2960 mm Width 2090 mm Height 2065 mm Rotor diameter 0.8m Rotor width 0.6 m Number of hammers 4pcs Max feed grain size To 0.15 m of sedimentary rocks For igneous rocks of 0.20 m Weight Crusher 5.9 T Crusher Capacity 40-70 T / h Main drive 45 kW. Included support frame and spare hammers set. Max rock crushing size 0,15 m sedimenting rocks 0,20 m magma rocks
used
Rink decrowner. - max capasity 1000 btl/h - Voltage 400 V - air pressure 5 - 8 bar
new
Crucible melting furnace, make VEI type: SO_EB_BU Temperature: 300°C - 1250°C
new
Gear wheel, crankshaft Part no. 110014 NEW
used
Autumn HR rapid 15 cream maker, old model with double jacket, beaters and Stainles. Heating is untested, as the jacket is not filled. Machine is equipped with stepless speed regulation. Scraper for boilers is not to install. Machine should be checked by time.
used
Crankcase complete
used
Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T
new
Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...
used
Recon Part number: 1230 2078 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
1 factory-tested pillar crane Payload 1000 kg Reach 5,000 mm Height approx. 4,000 mm Bottom bracket 3,170 mm Make of ABUS Workshop examination 2015 Electric chain hoist, floor operation with a new coat of paint Working speeds: Hoist around 1.5 / 6.0 m / min Trolley gear by hand Slewing gear by hand
used
1 factory-tested, well-preserved pillar jib crane Payload 1000 kg Projection about 6,360 mm Overall height approx. 3,350 mm Bottom bracket approx. 2,850 mm make of ABUS Workshop examination 2015 equipped with an electric chain hoist, floor operation on the boom moveable, and a new coat of paint Working speeds: Hoist around 1.0/4.0 m / min Trolley gear by hand rotation by hand The photos show a sample crane
used
RECON Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
used
1 x Crankshaft MWM 440-6, Recon Part number: 6.440.0.140.006.2 all main journals are ground to 1st step undersize (199, 50 mm) all crankpins polished standard size 175 mm incl. 6 pc. counterweights without gearwheel DNV GL test on request Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- Sales to commercial customers only! ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
used
SUB: FOR SALE... DEUTZ BA 8M 528 USED CRANK SHAFT ONE YEAR 2000 AT TURKEY HAVE A GDY SIR WE VE USED DEUTZ BA 8M 528 CRANK SHAFT AT TURKEY.. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANK MANUFACTURE YEAR IS 08/2000 WITH STAMPED GL –BV-DNV PART NUMBER 02058977VA 0187-05/8 MAIN / CON ROD MEASURMENT 188.97/158.93MM CRANK IS READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
used
RECON MWM TBD604 BV16 / TBG604 BV16 9190150117 - fully polished, on standard size 150/125 mm - part number 1208 7576 = 1213 5133 - incl. counterweights Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
RECON Standard size Part number 1213 5136 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
used
RECON 9190150128 - Completely sanded on 1e level undersize 123,75/97.75 mm - part number 0400 1106 - incl. counterweights and gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
For sale crown corks press SACMI. Type PTC 170 produced 2006 year. Sheets 811,5 x 564,8 mm. Perfect condition.
used
RECON 9190150034 Completely sanded on 1e level undersize 149.6/109.6 mm incl. counterweights and gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
RECON -completely polished on 1st level -incl. weights Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
new
NEW Completely polished 0.5mm undersize, Including DNV GL test without counterweights & gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us