We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,633 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Thermal CTP Cron CTP TP6032 UVP H Tiff catcher Aged 2022 Produced around 20.000 quadrat meter pro year Min size: 450 x 370 mm Max Size: 1524 x 1200 mm without RIP 32 Laser channels Speed 11 plates per hour Used the Sonora plates
used
Screw compressor, make: Worthington Creyssensal, model: RLR 4000 AX2, motor: 30 Kw (40 hp), Bar max: 8, m3/h: 318, working hours: 16.159.
used
Technical data of the bale opener line: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special ...
used
Manafacture: Cromar -Type: SD431102A -Overall dimensions: 2300 x 1750 x 1800 mm -Input neck size: 700 x 500 mm
used
SHRINK WRAPPER, CRYOVAC, TYPE: CJ 51T LH Technical description: Power supply: 380-440 V / 50-60Hz Power: 15 Kw Bandwidht: 250 mm Clearance: 270 x 130 mm Dimensions: 2100 x 900 x 1600 mm
used
Manafacture: Eco Cranes Dimensions: 1200 x 900 x 1000 mm Range of motion: 0° - 30°
used
Crathern & Smith / Perondi fully automatic rigid box making line Make Crathern & Smith / Perondi Model IA630 Year 1989 Blank size min: 100 x 120 / max: 450 x 880 mm Cover material weights 80-140 grams Box size min: 50 x 125 / max 400 x 600 mm Box height 12 to 120 mm Speed up to 36 pcs a minute Configuration Crathern & Smith / Perondi IA630 feeding + gluing of cover material Crathern & Smith / Perondi TS600 4/corner stayer for the board material Crathern & Smith / Perondi PA600 spotter by sensors Crathern & Smith / Perondi SV80 wrapper Crathern & Smith / Perondi MC80 warm glue meltiong pot with viscocity device Example boxes luxery boxes, games, phone boxes, and many more Make Barmedia details 2 heads, adjustable by hand wheel, for both cover material to make the blanks and for the inner board material to cut out the corners Available Direct
used
fully automatic cross-cut system with additional barcode recognition LUT system for error cutting Inlet conveyor 6 m 6 ejection stations
used
Manual Dar Fresh Vacuum Sealing Machine. for making skinn packs. Ideal for fresh meat on flat cardboard trays. built-in powerful vacuum pump, Dar Fresh - Skinn System. Mint condition.
used
Cryovac STE96-600 hot water shrink tunnel Serial: SN00422 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph
used
Electric motor BROOK CROMPTON Type: D160 LD ( D160LD ) Engine power 15 kW Speed : 1460 rpm Voltage: 220/ 380V eddy current coupling: 180 CD4/2 Power: 12.3 kW Speed: 1275 rpm 90V, 3.3 Ad.C. protection class: IP23 PYE Dimensions: 1040x450x500 mm
used
Cream whipping machine, Fabr. Cream-Master,
used
Electric pallet truck Manafacture: Crown Type: WT 3000 Series Year of construction: 2015 Nominal load capacity: 2000 kg Construction height mm: 1055 Lifting height mm: 125 Total vehicle length mm: 2152 Vehicle weight with battery approx.: 950 kg Weight without battery approx.: 625 kg
used
- Table size: 560 x 520 mm - Working height: 920 mm - Total power: 1 kW - Machine weight: 120 kg - Dimensions (W x D x H): 0.72 x 0.53 x 1.04 m Details Circular saw for wood / plastic, table / cabinet made of aluminum profiles, under-table with door, stop / guide
used
Manufacturer: Tranpporband <CRLF>Abdeckung, FREETEXT1: Länge 2580 mm, FREETEXT2: breite, FREETEXT3: Breite 1580 mm, FREETEXT4: Durchlasshöhe 100 mm,
used
Manufacturer: VICKERS RTE<CRLF>T1M6030, Type: DBC20618, Model: DBC20618, Serial number: 2976, Systemconfiguration: TAM 6030,
used
Manufacturer: Berkmann <CRLF>Zuluft und Abluft<CRLF>Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009
used
Manufacturer: Vakuumsaugtisch zum schleifen<CRLF>Plattenmaterial, Year: ca2000, FREETEXT1: Tischlänge mm 1700, FREETEXT2: Tischbreite mm 400<CRLF>, FREETEXT3: Saugerreihen 1, FREETEXT4: Drehbar stern, FREETEXT5: Aushebung, FREETEXT6: Höhe verstellbar1030 mm, FREETEXT7: Busch Vakuumpumpe, Year :ca2000
used
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg
used
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 100 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 355/200/H220 mm -Weight: 12.5 kg
used
Crippa cnc pipe bending machine All hydraulic elements have been revised It bends up to 323mm pipes. It is fast and sensitive. It has Turkish software and touch screen panel. There are 5 types of bending dies and mandrels. Rotation and advancement are servos. Our machine has no problems and can make very serial bending.
used
Electrode grinder, TIG welder, grinder, tungsten electrode grinder -Manufacturer: Cronitex, electrode grinder with suction system and accessories -Type: WIG-Spitz -Motor: 220V / 0.18 kW / 2900 rpm -Grinding discs: Ø max. 150 mm -Extractor system: in a sturdy base cabinet -Accessories: included, see photos -Dimension: 550/250/H1300 mm -Weight: 76 kg
used
C&S Crathern & Smith- rigid box machines 2 machines sets for bottom and cover in one production cycle 2 x automatic gluing machines: CSG-1 2 x thermoplastic quad stayer QA-200 2 x automatic vision box spotter CSV-1 year 1997
used
Automatic hot water dip tank designed to shrink bags and to remove the wrinkles caused by the vacuum process to optimise the pack apperance and to improve the pack security. PLC controlled. Insulated water tank. Motorised conveyor for transfer packages into the machine, immerse them in the water for a pre-determined time and then discharge them. Inside measurements of the insine of the bath: 90cm x45cm x25cm Excellent working condition, Video's of operating machine available. The dip tank can be very well used in combination with our Cryovac vacuuming machine. Please see our other advertisement for this machine. abcs://abc.resale.info/en/cryovac-vs-20-dc-vacuum-packaging-machines/N o-163170289
Weight Reader, Type CROWN GS 12, Length: 3200mm, Width: 1700mm, Height: 1800mm, Deck 26501250mm, 3sqm, Fan 7.5KW, Hydraulic Motor 1.1KW, Drive Invert 1.1KW, Weight 1400KG, Gravityseperator.co.uk at call Tel. 01715213204
used
APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Liquiverter, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system layout. ...
used
Crypto Peerless TR250 Universal veg slicer Stainless fruit and veg slicer, comes with four different cutting blades, on mobile frame, 3Ph
used
Three crosscut saw MADREW DCKRR40 - year of production 2008 - user manual, CE - Polish manufacturer TECHNICAL PARAMETERS: 3 x 4 kW motor maximum cutting thickness 100 mm maximum cutting length 2940 mm maximum cutting width 300 mm minimum cutting length 460 mm disc diameter 400 mm feed speed smoothly adjustable 5-25 m/min spigot diameter 3 x 100 mm feed motor 0.75 kW rotational speed 2900 RPM dimensions (length/width/height) 450 x 140 x 140 cm weight 950 kg
used
Ctp Platesetter CRON Model TP RRP 6332 year 2022 Min: size: 450 x 370 mm MAx: 1524 x 1200 mm with Stacker
used
Liquid nitrogen tank, nitrogen tank, liquefied gas tank, liquid nitrogen tank -Manufacturer: Cyrotherm, liquid gas tank type Apollo 100 -Content: 104 liters -Operating pressure: 1.3 bar -Dimensions: 620/620/H1030 mm -Weight: 64kg -Scope of delivery: according to pictures
new
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cryovac VS20 packaging machine Cryovac C-106 automatic soaking tank Exit mat Rietschle VC 300 pump (01) Roots Pump Busch Typ GRH1000 Stainless steel pump chassis Fully revised in 2021, revised every year since. Perfect working condition
used
Liquid nitrogen generator designed for the production of liquid nitrogen from atmospheric air, its accumulation in a Dewar vessel and storage with the possibility of dispensing the product at any time. Included: Ceccato BeltairPro 500F7.5R PRO piston compressor (Italy), air dryer Ceccato CDX 4 (Italy).
used
Platen press / Diecutter - clamp shell die cutter Make Crosland Model A2 Year 1960 ? Max size 46 x 67 mm Details 2 chases Available direct
used
Description: with free stroke lifting height: 4000 mm electrical problem, driving without function Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,100 mm, weight approx.: 1,500 kg
used
Description:  ,Roller conveyor dimensions 2100 x 1230 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,500 x 1,300 mm, weight approx.: 250 kg
used
Description: Belt dimensions 3200 x 1830 mm , roller conveyor dimensions 2700 x1900 Approx. Onsite Dimension. (l x w x h): 3,300 x 2,000 x 1,300 mm, weight approx.: 300 kg
used
Description: Belt dimensions 3200 x 1650 mm , roller conveyor 3200 x 1700 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,800 x 1,300 mm, weight approx.: 300 kg
used
Description: Belt dimensions 3200 x 1250 mm , roller conveyor dimensions 1500 x 1300 mm Approx. Onsite Dimension. (l x w x h): 3,200 x 1,500 x 1,300 mm, weight approx.: 250 kg
used
Description: Belt 3200 x 1650 mm  , Approx. Onsite Dimension. (l x w x h): 3,200 x 1,800 x 1,400 mm, weight approx.: 300 kg
used
Approx. Onsite Dimension. (l x w x h): 3,300 x 1,400 x 1,400 mm, weight approx.: 250 kg
used
Description: Belt dimensions 3200 x 1250 mm roller conveyor 2300 x 1300 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,600 x 1,000 mm, weight approx.: 250 kg
used
Description: Belt dimensions 3200 x 1650 mm , Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,500 mm, weight approx.: 250 kg
used
Description: Belt dimensions 3200 x 1000 x 830 mm  , Approx. Onsite Dimension. (l x w x h): 3,200 x 2,000 x 900 mm, weight approx.: 200 kg
used
Description: Belt dimensions 3200 x 1250 mm roller conveyor dimensions  ,2500 x 1300 mm , Approx. Onsite Dimension. (l x w x h): 3,200 x 1,800 x 1,300 mm, weight approx.: 300 kg
used
Description: Belt dimensions 3200 x 1830 mm , roller conveyor 2500 x 1900 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 2,200 x 1,400 mm, weight approx.: 300 kg
used
Description: Belt dimensions 3200 x 1250 mm , Approx. Onsite Dimension. (l x w x h): 3,300 x 1,400 x 1,300 mm, weight approx.: 300 kg
used
Approx. Onsite Dimension. (l x w x h): 3,200 x 2,200 x 1,300 mm, weight approx.: 300 kg
used
Description: Belt dimensions 3200 x 1250 mm Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,500 mm, weight approx.: 250 kg