covering machine used for sale

We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Variovac; Model: 4000 VA; Year of production 1997; Working with soft or hard foil; Bottom foil: +/- 560 mm (approx); Upper foil: +/- 550 mm (approx); Molding length: 420mm; Forming width: 503 mm; Molding depth: 70mm; Formats: 3.2; Length: 8600 mm; Width: 1200 mm; Height: 2000 mm; Weight: 2500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Mounted on workbench, disassembly is the responsibility of the buyer

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: CFS; Model: TIROMAT Compact 420; Year of production 2001; Working with soft foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 430mm; Forming width: 380mm; Molding depth: 130 mm; Formats: 2.2; Length: 6700 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1050 mm total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: FREEDOM / F140; Year of production 2004; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 256mm; Forming width: 386mm; Molding depth: 120mm; Formats: 2.2, 3.2; Length: 7500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Philips Diagnost TH with the following system components Generator Optimus 50 Tube RO 1750 0.6/1.2 (ceiling hanging) Vertical tripod Diagnost VE/VT • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and equipped with Stretch film wrapped and can be picked up immediately • You buy the system in "as-is" condition ex warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation, commissioning and configuration of the plant or parts of the plant must be carried out by the manufacturer or by a by the manufacturer authorized specialist or technician!

It is a used, reconditioned Rego stirring and beating machine SM 3 (32 liters) for sale. The speed of the machine is infinitely adjustable. With automatic timing of the timer, bowl height adjustment by crank revolution. Electrical conversion from beating to stirring, real deflection by stationary shaft. The machine has a new stirring head, has been completely re-stored and painted. Very good condition, runs very quiet. Incl. bowl, tirring tool and beating tool. Flat stirrer and dough hook made of stainless steel for an extra charge. Dimensions: width: 60cm, depth: 70cm, height: 160cm, weight: 290kg, 400 volts Price on request.

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

With accessories

RÖHM machine vise, model 711-04, ideal for milling machines and other machine tools. Condition: used, functional Jaw width: approx. 150 mm Maximum clamping width: approx. 150–160 mm Total length: approx. 500 mm Fastening via 4 machine holes Replaceable clamping jaws

Serial number: 24550616 Punching force: 200 kN Connection: 11 kVA Table dimensions: 2450 x 1200 mm including accessories such as various punches and punching tools Reference: CES - Lot 107

Equipped with Rated input voltage: 220V; Rated input strength: 25A; Maximum cutting thickness 20MM; Idle voltage: 234V; Output current setting: 20-40A; Rated output voltage: 96V; Cyclic duty cycle: 40%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): No; Unused in box

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc

Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool sparing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping area 1370 x 400 mm Number of T-slots 5 pcs. Spindle speeds: 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m

Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5)

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5)

Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.

Brotschneidemaschine verwendet. Sehr guter Zustand.

Balestrini linear milling machine two milling units pneumatic pressure of elements

Lathe cuting tools from KEMMER in deferent size and type

Specifications Material: Metal and heat-resistant plastic Welding method: MMA (stick welding) Includes: Electrode holder, earth clamp Power: 3 KVA, 220V Current regulation: 10–100A Maximum Electrode Thickness: 3.2mm Insulation class: F Protection class: IP21S Duty cycle: 20% at 100A / 40°C Open voltage: Max. 78V Efficiency: 85% Power factor: 0.7

Back gauge type: Manual Angle adjustment: Motorized Tool holder: Fixed & fingers/segments

Unused, handbook available

Machine number: 16801 Spindle speed: from 25 to 3000 rpm Table dimensions: 500 x 370 mm with two grooves Drilling depth: up to 180 mm Training workshop part 2 - Lot 4

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Bolted to pallet;

Volume: 100L Design Pressure: 12Bar Test pressure: 17.16Bar Min./MAX Temp. 10/50 c

Unused

Sold with contents. Batch that is part of a combination of batches

Equipped with 12500 W; 5m; Maximum power 120A; Unused in box