cover used for sale

Jolly 2500 Liters type D mixer in AISI 304 (Mot. 20 HP) complete with electrical panel wired with IP-65 protection degree, two lifting jacks, balanced cover with counterweight, Kevlar reinforced belt drive, motor/system 20 HP 2-speed electric motor, removable hopper cover, accident-prevention grids in compliance with UNI 294 et seq., emergency stop button, electro-pneumatic unloading, elliptical loading hopper with external edge, captive screws on fixed guards, loading hopper polishing, tank made with sheet metal with BA finish and mirror polishing of the convex rear part, oversized loading hopper, lower compressed air seal with PTFE gasket, upper compressed air seal with PTFE gasket, compressed air regulation unit.

Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2 ...

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15 ...

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m Guides, drive and  ...

Transnorm belt curve conveyor left GKF 180°-1170-1000-IR1200 -- NEW RA1944 Technical data: Conveying length middle radius (NL): 5340 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1170 Belt width in mm: 1000 angle: 180° Driven ...

Transnorm belt curve conveyor left GKF 180°-1270-1100-IR1200 -- NEW RA1945 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven ...

Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 -- NEW RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Drive ...

Transnorm belt curve conveyor right GKF 180°-1170-1000-IR1200 RA1964 Technical data: Conveying length middle radius (NL): 5341 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1127 Belt width in mm: 1000 angle: 180° Driven: YES  ...

Machine for reconditioning (4 identical in stock from 01.02.2024) 1 machine and 2 kneading bowls each Type: MK 160AK-CSDT Machine housing in chrome steel Year of construction: 2003 / rev.2016 Dough capacity: 160 kg Spiral and kneading bowl in chrome steel Protective cover with slip ring Extendable with electric head Computer control The following revision work is necessary: - Head gearbox (runs rough) - Gears Boiler - Drive gear - General service work Protective cover with slip ring Extendable with electric head Computer control

Machine for reconditioning (4 identical in stock from 01.02.2024) 1 machine and 2 kneading bowls each Type: MK 160AK-CSDT Machine housing in chrome steel Year of construction: 2003 / rev.2016 Dough capacity: 160 kg Spiral and kneading bowl in chrome steel Protective cover with slip ring Extendable with electric head Computer control The following revision work is necessary: - Head gearbox (runs rough) - Gears Boiler - Drive gear - General service work Protective cover with slip ring Extendable with electric head Computer control

Cover Size: Max. 610x410mm, Format: Max. 400x270x40mm, Min. 120x100x3mm, Thickness: 3mm to 40mm, Speed: Max. 3.000 Cycles/Hour, 900-2500 Books/Hours, Cover Feeder With Scoring, Milling And Roughening Station, Hot-Melt Spine Gluing Unit, Hot-Melt Side Gluing Unit, Delivery

Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feeder Baujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mm Aussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz fuer Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed station Ratiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rueckenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heissleim / Hotmelt side gluing unit Faelzelstation / Back Lining station Buchblock- und Ganzpresse FM 405 fuer fadengeheftete Bu ...

1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Mueller Martini Econobinder EB II Year 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Seydelmann cutter 65 liter Type: K 65 AC Completely made of special stainless steel 65-liter bowl made 2 knives speed - 1500 / 2950 2 bowl speeds – fast and slow Main cover made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: Width: 120 Depth: 100 Height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover,  ...

Seydelmann cutter 120 liter Type: K 120 AC 8 Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side The main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine Knives 6 pieces Dimensions: 190x150x180cm Main motor power: 40 kW Voltage: 400 V, 50 Hz Year of production: 2008

General SKU309N500 LocationBarneveld MakeFalk gmbh & Co. KG No.3304 Year of construction2007 Material Shell materialStainless steel 1.4571 (316Ti) Cover materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell1 Bar Working pressure tubes4 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface150.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface150,5 m2 Tube capacity830 Ltr U-typecheck Number of tubes:157 Tube diameter25mm Tube length(2x)5900mm Wall thickness tubes2,0mm Max. temperature100 degr.C Shell capacity1530 Ltr Shell diameterdia.711mm Shell length6370mm Wall thickness shell5mm Max. temperature100 gr.C. Shell connectionsdn500, dn80 Cover connections(2x)dn200 Information Mounted ...

General SKUR0993 LocationBarneveld MakeVeronesi TypeAF2000 No.MA-2058-1 Year of construction2002 Main Features MaterialStainless steel Capacity25000 Ltr./Hr. Motor30 KW Specified Features - Separator Separatorliquid clarification Capacity25000 ltr/h Motor30 kW ATEX Max. rotor speed5106 rpm Inletdia. 85mm Liquid outletdia. 50mm Solids outletdia. 100mm MaterialStainless steel Information Mounted on mild steel framecheck With switchgearcheck Total height2,0 M Weight1600 Kg Floorspace2,0x2,0 M Extra SpecificationsMaterial specification: Disc stack: Incoloy® Alloy 825, :Bowl cover: Inconel® 625 :,Bowl bottom: UNS S32760 :Anti abrasion, :Liner: :Incoloy® Alloy 825, :Movable part: SAF 2205, :Fixed ring: SAF 2205, :Movable ring: :SAF 2205, :Cover: AISI 316L, : :Upper Basin: AISI316L, : :Basin: AISI 316L SeparatorsVeronesiCentrifuges > SeparatorsBrand > ...

General SKU289P541 LocationBarneveld MakeDEWA (NL) No.B394 Year of construction2007 Pressure Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface0.7 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4401 (316) Heat exchangercheck Verticalcheck Heating surface0.7 m2 Tube capacity2,5 Ltr Number of tubes:30 Tube diameter6mm Tube length1200mm Shell capacity4,5 Ltr Max. temperature150 degr.C. Shell connections2x dia.20mm Cover connections1x dia.25mm, 1x cover missing Information Floorspace0,7x0,4 M Total height1,5 M Weight100 KG Extra SpecificationsCEShell and tube heat exchangersDEWAHeat exchangers > Shell and tube heat exchangersBrand > DEWA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to an ...

General SKU300P655 LocationBarneveld MakeMambretti Milano (IT) No.1045 Year of construction+/- 1975 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume100 Ltr. Motor1 KW Specified Features - Processing vessel MaterialStainless steel Closed stirring vesselcheck Capacity100 Ltr Vessel sizesdia.450mm x600mm Dished bottomcheck Slope bottomcheck Flat top sidecheck With covercheck Top connectionswith funnel dia.200mm OutletEmpty by tilting With jacketcheck With gate type stirrercheck Motor0,5/1,0 KW, 380-420 Volt Speed mixing shaft23/46 rpm With homogenisercheck Motor1,0/4,0 KW, 380-420 Volt Information With switchgearcheck Floorspace1,8x1,4 M Total height2,4 M Weight900 KG Extra SpecificationsHeight cover hydraulic adjustable cover, system with hydraulic unit, motor 0.75 KW, 230/400 volt, Working pressure for jacket unknown, manufactur ...

General SKU309N518 LocationBarneveld MakeEbner Anlagen und Aparate Germany No.062404700 Year of construction2007 Material Shell materialStainless steel 1.4462 (318LN) Cover materialStainless steel 1.4462 (318LN) Tube materialStainless steel 1.4462 (318LN) Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface120 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface120 m2 Tube capacity820 Ltr Number of tubes:334 Tube diameter25,0mm Tube length5000mm Wall thickness tubes1,0mm Max. temperature10-100 gr.C, Shell capacity1600 Ltr Shell diameter750mm Shell length5000mm Wall thickness shell4,0mm Max. temperature10-120 gr.C Shell connecti ...

Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...

FRYMA model VME 20C lab/product development scale mixer for creams, lotions, gels, viscous and semi viscous products. Product bowl in 316 grade stainless steel 360mm dia x 360mm deep with shallow dished base, 20mm dia bottom outlet with hand operated flush filling valve fitted. Approx gross capacity 30 litres, approx working volume 20 litres. Stainless steel jacket to sides and base area rated at 3 bar w.p. Vessel rated at -1bar (FV) to 5bar w.p. Vessel has temperature probe into base and 20mm dia connection for product additive or sampling point. Main mixer has four bars with teflon scraper blades attached, combined with homogenising/colloid mill 80mm dia workhead. The product bowl is power raised/lowered with dowel location at interface; 4 x swingbolt type clamps to secure. The top cover has a vessel lightglass/light 60mm dia and 60mm dia sightglass and a 15mm dia valved inlet. Control ...

GIUSTI GMP Pharmaceutical quality mobile liquids vessel in polished finish 316 grade stainless steel. 750mm dia x 980mm deep including bottom hemispherical base. Gross capacity approx 350 litres to flange. 25mm dia bottom outlet with valve. 210mm high top dish with 130mm lightglass and light, 4 bar pressure gauge, pressure relief valve, 80mm dia chargeport with hinged cover, 3 off 25mm dia connections with valves, all hygienic quality fittings. Mounted onto a stainless mobile base with castors. Base width 860mm, flange dia 920mm this extra information is standard for this model. Please always double-check the details during a visit The Giusti 300 Litre Vessel stands as an exemplary liquid mixer in pharmaceutical manufacturing, offering unparalleled quality and efficiency. Constructed from polished 316-grade stainless steel, this vessel adheres to GMP pharmaceutical standards, ensur ...

WARWICK container systems lab/product development size cube blender in polished finish 316 grade stainless steel. Cube internal dimensions 265mm x 305mm x 405mm deep, gross capacity 33 litres, approx working capacity 15-18 litres. Top cover with clasp fastening. Stainless steel motor enclosure. Stainless steel control panel with variable speed, cycle time selector RPM or time 0-5mins. 240v 1ph. this extra information is standard for this model. Please always double-check the details during a visit The WARWICK Cube Blender represents a pinnacle in powder blending technology, specifically designed for pharmaceutical lab and product development applications. Crafted from high-quality 316 grade stainless steel with a polished finish, this blender ensures optimal hygiene and durability, meeting the stringent requirements of pharmaceutical manufacturing. With internal dimensions measu ...

Haagen & Rinau UNIMIX SRT15 high quality process vessel in 316 grade stainless steel. The vessel gross volume is 22½ litres, rated @ full vacuum and 2 bar W.P. and 133°C. The vessel jacket is rated at 4 bar W.P. and 151°C. Bottom entry underdriven homogeniser with variable speed control setting on the main panel. The vessel has a hydraulic tilt feature allowing access for cleaning etc. Vessel top cover has hydraulic raise/lower of the scraped surface mixer unit. Top cover features include 0-4bar gauge, pressure relief valve, viewing port and additive port with hopper. Vessel main features include:- A. Variable speed main mixer with indication B. Product temperature control C. Homogeniser multi-pass recirculation bypass system D. Hot water C.I.P. system E. Cooling water jacket supply F. Separate heating and cooling services module G. Integrated vacuum system H. Full feature c ...

Skerman hemispherical process/mixing vessel constructed (1996) in food grade stainless steel to BS 5500 Cat. 3 design code. Approx 1.2m diameter x 1.0m total depth. Approx 1,206 litre gross volume. 80mm dia centre bottom product outlet (RJT) with remote manual valve operation. Stainless jacket to hemisphere area rated at 3.1bar design pressure. The jacket is insulated and rigid stainless steel clad with polished finish. Full profile scraped surface agitator with contra rotating baffle plates. The vessel top cover and mixer gear is power raised and lowered hydraulically. The vessel stands on three 80mm dia legs, 1640mm height to vessel rim. Top cover plate has a 360mm wide hinged raised access panel with a safety grid. Jacket and vessel design temperature is 143 C. Approx overall dimensions 1900 x1300 x 2250mm high. (two matching vessels available) Previous product usage, dessert manufact ...

Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...

Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...

Complete busbar system PLS 800, 3-pole, 3800mm, SV3525.000, Rittal, used Top Special price The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Complete busbar system PLS 800, 3 pol, 3800mm long, Rittal, used-Top consisting of: - 19 bar supports for 3 bars SV 9341.000 Rittal, - 4 x 3 Cu busbars PLS 800 each 695mm lg, SV 3525.000, 300mm² - 1 x 3 Cu busbars PLS 800 each 495mm lg, SV 3524.000, 300mm² - 4 x 3 bar connectors SV 3505.000, Rittal - 1 piece Riline60 base tray, 3800mm long, SV 9341.130 Rittal - 1 piece cover plate for Riline60 base tray, 1880mm long, SV 9340.210 - 2 pieces end cover for Riline60 base tray SV 9341.070, Rittal - 4 x 3 pieces SV 3504.000  ...

DESCRIPTION U.M. ORIGIN VALUES X axis - Longitudinal travel 5,000 mm Z axis - Vertical travel 2,200 mm Y axis - Transversal travel 1,000 mm Spindle motor power in S6 kW 42 Max. speed constant power spindle rpm 2,500 Supply voltage Vac 400 Power frequency Hz 50 ISO spindle taper ISO 50 SIEMENS Brushless Motors SIiemens Simodrive 611 drives CNC FIDIA C10 Supplied accessories: - X-axis bench with cable carrier and X-axis telescopic cover - Double upright complete with ram - Hanging arm with CNC - Z axis telescopic cover - Fixed operator platform with protections - Conical supports and gibs - Carter - N° 2 hydraulic power units - Oil cooler - Coolant tank - Cabinet - N° 2 horizontal nose cones Machine retrofitted in 2010. The machine is currently positioned on the ground in our workshops. Location: Northern Italy

Year of construction 2001 Hours of power up 16,400 hours Spindle rotation hours h 3,078 X axis - Longitudinal travel 7,000 mm Z axis - Vertical travel 2,500 mm Y axis - Transverse travel mm 1,250 (1050) Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 Spindle taper NOT INSTALLED Automatic head change Yes ISO 50 tool magazine no. pos. 60 Automatic tool changer installed HEIDENHAIN TNC430M CNC Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Up ...

Year of construction 2000 Hours of power up h 10205 X axis - Longitudinal travel 10,500 mm Z axis - Vertical travel 2,500 mm Y axis - Transversal travel 1,250 mm Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 ISO spindle taper ISO 50 Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Upright complete with ram - Z axis telescopic cover - Articulated presetting probe support - Pneumostatic support system - Carter - Hydraulic unit - Filtering tan ...

Year of construction 1985 X axis - Longitudinal travel 4,000 mm Z axis - Vertical travel 2,550 mm Y axis - Transversal travel 1,000 mm Hydrostatic support Yes Spindle motor power in S6 kW 42 Max. speed constant power spindle rpm 2,500 Supply voltage Vac 400 Power frequency Hz 50 ISO spindle taper ISO 50 Brushless motors CNC GBR SINUS - To be replaced Total weight 48,500 kg Supplied accessories: - X axis bench with X axis telescopic cover - Double upright complete with ram - Z axis telescopic cover - Conical supports and gibs - N° 2 hydraulic power units - Coolant tank - Cabinet - Mobile operator platform (Z and Y axes independent from the mast) - Hanging arm with CNC - Chip conveyor - Levelers The machine is currently positioned on the ground in our workshops. Location: Northern Italy

For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h) Machine weight baler ap ...

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Closing machine, fully automatic, year 2018, ALWID Variant-SK/DST, The system consists of:, - a fully automatic sealing machine, type: ALWID-VARIANT-SK / DST,, with a rotating star and set up for a screwing head, for one can size and one screw cap size, with fully automatic, Cap sorting and cap feeding, with lining of the, Cap sorting / parts conveyor, - With anti-twist device, set up for a round can size, - as a solo machine with 1.0 mtr. Infeed conveyor belt and 1.0 mtr., Outfeed conveyor belt, with infinitely variable belt drive, with, Bottle conveyor made of belt system, with complete electric, Control, machine base in stainless steel design, control cabinet on the, outlet side, - with a 4-sided protective cover with panes made of MAKROLON with, Security doors in CE compliant design, with top cover made of, MACROLON, General Information:, Working direction: right - left, Working heig ...

Table cutter, Blixer, make Kronen/Dito Sama/Electrolux Professionnel, type KE 180 S, year 2016, Cutter blender for fast liquifying, blending and chopping, Productivity suitable for 100 - 300 meals per shift., Bowl capacity (total): 17.5 liters - max. 8 kg batches,, variable speed control from 300 to 3000 rpm - 400V,, Rotor (3kW) with micro-serrated knives,, Boiler wall and lid scraper, was used to chop peeled ginger bulbs., Ingredients can be filled in during operation via the spout., Bottom mounted cover for better handling., Metal cover frame to ensure watertightness and avoid leakage., All parts that come into contact with food can be removed without tools., Power: 3000 watts., AISI 304 stainless steel bowl with non-drip spout and handles, easy to use., Scraper with easily removable handle., Variable speed from 300 to 3000 rpm, Membrane button control panel with IP65 protection., Lid  ...

x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m GEquipment • Ma ...

020.06377 with dust cover with 2 speeds with 2 clocks, extendable incl. 2 aluminium tank trolleys, for approx. 120kg dough 020.06378 Boku Spiral Kneader with dust cover with 2 speeds, with 1 o'clock, extendable incl. 2 aluminium tank trolleys, for approx. 120kg dough

// currently being renovated in our workshops // Manufacturer : Haagen & Rinau Model : Unimix SRM 200 Year: 1993 Type : Vacuum mixer   Materials: stainless steel Vessel capacity: 406 L Maximum temperature: 143?C Pressure: - 1 / 3 bars   Double jacket capacity: 34 L Maximum temperature: 151?C Pressure: 4 bars   Slow mixing : Central stirring + scrapers. Fixed counter action. Power: 7,5 KW Fast mixing: emulsifier at the bottom of the tank. Suction and recirculation of the product. Power : 8 / 12 KW Integrated electrical cabinet. Siemens S5 controller   Hydraulic unit: - Up and down of the cover with its mixing tool - Rotation of the cover with its mixing tool - Tilting of the tank - Up and down of the homogeniser at the bottom of the tank.

Used Syrup Room A DUE SYRUP ROOM 1999 The syrup room is in excellent condition almost new barely used Components One Sugar dissolving tank with pasteurizer and filtration One Sugar loading screw conveyor Two 10 000 L tanks Two 20 000 L tanks One Tray One walkway connecting silos One Pasteurizer 2500 l h ONE DISSOLUTION TANK 10 000 L capacity the tank is composed of the following components 1 Conical manhole top cover 2 Pasteurization and filtration system for sugar solution 3 Central cylindrical plating 4 Cone shaped bottom 5 Square support feet 6 Vertical agitator group 7 Supply pumps ONE LOADING SCREW ELEVATOR 12 000 kg h flow loading screw to be used to load crystalline sugar It is composed of Hopper Easel Loading screw Motor gearmotor group Protective grid ONE PASTEURIZER 2500L h Pasteurizer made of AISI 316 and 304 steel components 1 Plate heat exchangers 2 Thermoregulator tool 3 Fl ...

Description: GIARDINA DUALTECH 420 DB DRY Roller Application Machine with synthetic-coated, 2,000 mm wide conveyor belt and a working width of 1,300 mm Material recovery GREEN BELT Infeed roller conveyor with a working width of 1,300 mm, length 1,220 mm  ,  , , , Roller transport, driven rollers with suction device at the bottom.  , , , Workpiece blow-out, rotating blow-out, time-controlled  , , , Outfeed transport- hinged  , , , Lexan cover, hinged at the discharge, cover of the green belt zone  , , , Powered roller transport, PVC coated rollers. __________________________________________________________________ The linear slides are dust-sealed and are maintained via a few central lubrication points. Modern software controls the acceleration as well as the deceleration and is adjustable from 0-120 m/min.  ...

x-travel:510 mm y-travel:510 mm z-travel:510 mm :550 x H 800 mm B-axis (table):0.001 Grad table-size:400 mm table load:400 kg spindle drive:22 kW spindle nose:40 BBT spindle speeds:15000 1/min number of tools:60 tool diameter:150 mm tool length - max.:410 mm weight of tools max.:8 kg milling feeds:1-20.000 mm/min rapid speed:60 m/min Machine size (LxWxH):1750x5060x2720 mm weight of the machine ca.:9 t inner coolant:70 bar 3 chip conveyor:2 fach automatic tool changer:60 fach Automatic Pallet :2 Stück :von LHL Brand new horizontal machining center with: CONTAINS: 1. Control system Fanuc Oi-MF (10.4" Screen) 2. Working table size: 400 x 400 mm 3. Max. workpiece dimension: DIA. 550 x H 800 mm 4. Max. table load capacity: 400 kgs each pallet 5. Spindle center to table surface: 80 ~ 590 mm 6. Table center to spindle nose: 70 ~ 580 mm 7. X/Y/Z Stroke 510/510/510 mm 8. X/Y/Z Stroke rapid tra ...

x-travel:610 mm y-travel:580 mm z-travel:580 mm distance spindle nose and table:70-650 mm distance spindle center to table:80-660 mm table height over floor:1150 mm pallet table size:400x400 mm max. workpiece weight:400x2 kg table - indexing:1° (optional 0,001°) spindle speeds:12000 1/min spindle drive:22/25 kW spindle speed steps:2 spindle nose:40 SK/BT spindle bearing diameter:75 mm rapid speed:60 m/min feeds:1-20000 mm/U tool taper:40 SK/BT Tool changer:60 fach tool diameter:75 mm weight of tools max.:12 kg workpiece length:410 mm number of pallets:2 compressed air volume:400 l/min coolant tank:550 l hydraulic tank:30 l lubrication tank:2 l total power requirement:45 kva weight of the machine ca.:9500 kg CNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:20 bar Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar ...

x-travel:1050 mm y-travel:850 mm z-travel:970 mm distance spindle nose and table:100-950 mm distance spindle center to table:100-1070 mm table height over floor:1300 mm pallet table size:630x630 mm max. workpiece weight:1200x2 kg table - indexing:1° (optional 0,001°) max. workpiece height:1100x1100 mm spindle speeds:10000 1/min spindle drive:30/25 kW spindle speed steps:2 spindle nose:50 SK/BT rapid speed:50 m/min feeds:1-20000 mm/U tool taper:50 SK/BT Tool changer:60 fach tool diameter:125 mm weight of tools max.:25 kg workpiece length:610 mm number of pallets:2 weight of the machine ca.:21600 kg automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:15 bar CNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von  ...

x-travel:710 mm y-travel:680 mm z-travel:680 mm distance spindle nose and table:70-750 mm distance spindle center to table:80-760 mm table height over floor:1150 mm pallet table size:500x500 mm max. workpiece weight:500x2 kg table - indexing:1° (optional 0,001°) spindle speeds:12000 1/min spindle drive:22/25 kW spindle speed steps:2 spindle nose:40 SK/BT spindle bearing diameter:75 mm rapid speed:60 m/min feeds:1-20000 mm/U tool taper:40 SK/BT Tool changer:60 fach tool diameter:75 mm weight of tools max.:12 kg workpiece length:410 mm number of pallets:2 compressed air volume:400 l/min coolant tank:550 l hydraulic tank:30 l lubrication tank:2 l total power requirement:45 kva weight of the machine ca.:12200 kg automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:20 bar CNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 ba ...

x-travel:1200 mm y-travel:1000 mm z-travel:1000 mm distance spindle nose and table:100-1100 mm distance spindle center to table:200-1200 mm table height over floor:1350 mm pallet table size:800x800 mm max. workpiece weight:1800x2 kg table - indexing:1° (optional 0,001°) max. workpiece height:1300x1250 mm spindle speeds:10000 1/min spindle drive:30/25 kW spindle speed steps:2 spindle nose:50 SK/BT rapid speed:50 m/min feeds:1-20000 mm/U tool taper:50 SK/BT Tool changer:60 fach tool diameter:125 mm weight of tools max.:25 kg workpiece length:610 mm number of pallets:2 weight of the machine ca.:26000 kg automatic tool changer:60 fach cnc rotary table:1 ° inner coolant:15 bar Servo motors:vom Steuerungshersteller CNC controller:Siemens/Fanuc/Heidenhain ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:v ...

:SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/24000/360 00 mm y-travel:2400|2800|3200 mm z-travel:1100/1400 mm distance between columns:2450|2850|3250 mm w-axis:1500/2000 mm für SD(W) table width:1600|2000|2400 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 12/12/10/1 m/min machine length:13,5m~43,5 m machine width:6,5|6,9|7,3 m Weight approx.:50t+2t/m|53t+2,3t/m|56t+2,6t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-A ...