cover used for sale

Working width 1060 mm

Longitudinal and cross-cutting machine Working width: 1500 mm for plastic, PVC, etc.

AIR JET MACHINES NUMBER 25 POSITIONS HEBERLEIN JET

Maximum panel dimensions (for 3D wrapping) 1240x2740 mm Pressing cylinders 6 pcs Piston diameter 140 mm Piston stroke 190 mm Total maximum counter pressure 200 T Pneumatic pressure at work (max) 5 Kg/cm Room height 160 mm Upper and lower flange 40 + 20 mm Part size / manual pin placement area (maximum) 1250x2550 mm Minimum foil width 1400 mm Minimum plate thickness 15 mm Working height (distance from the floor to the level of the loading tray) 930 mm Maximum temperature of the heating liquid 130°C Air tank capacity 500 liters Total installed power 50 kW Dimensions (L x W x H) 11500x2950x2550 mm Weight 12800 kg In accordance with CE standards

New Pleurl bearing head covers 6.483.0.151.003.

Hand Feeding Covering Material, Hand Feeding Hard Spine Insert, Automatic Cardboard Feeding, Automatic Soft Spine Insert Feeding From Roll, Hot Glue, Format: Max. 530x400mm, Min. 110x155mm, Speed: Max. 15 Cycles/Min.

Rill- und Leimmaschine fuer Umschlaege - Creasing & Gluing machine for Covers Prakma M/3/St./Rill Year ca. 1973 - Serial-No. 166 101 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Rill- und Leimmaschine fuer Umschlaege - Creasing & Gluing machine for Covers Karl Traenklein CGM (b) Serial-No. 59062/5 Working width max. 500mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Raised floor, floor covering, mineral fiber raised floor, raised floor panel -Manufacturer: Mero TSK, double floor -Type: unfortunately no exact type designation, see photos -Dimensions plate: 600 x 600 x 40 mm -Quantity: 70 panels available / approx. 25 m² -Price: complete -Weight: 11.2 kg/piece / 784 kg

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table

- MIC 3 Board with Cover - HP Part Number CA355-00301 - for HP Indigo Series 2 Machines

Dear's Sale, used 1 engine MAN 42 COVER Brgds Hakan KUSCU +905323642509

Dear's Sale, used 1 engine MAK 452 COVER Brgds Hakan KUSCU +905323642509

- Cover Lid MWM 12420476 - Please note! Price per piece! - 12420476 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into our ...

Year of construction unknown 1 set of contactors for station 2 Drive and operating side Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

Matchbook noteblock pasting machine / advernote Matchbook Model Advernote Year 1980´s Size of the noteblock 50 x 50 mm Size of the cover 50 x 110 mm Cover process The cover is being fed automatic from the magazine by air, gets the creasing lines, and gets folded Noteblock process The noteblock is being fed automatic from the magazine by air, gets a dot of glue and is inserted into the cover Finished process The cover is folded in the correct sequence and will be delivered onto the delivery tray, upright. Available direct

1-Clamp Automated Perfect Binder, Format: Sheet Size: Max. 320x320mm, Min. 148x105, Format: Cover Size: Max. 660x320mm, Min. 230x135mm, Book Thickness: 1 to 50mm, Cover Weight Range: 80-300 g/m², Cover Pile Height: Max. 70mm, Max. Production Speed: 500 Cycles/Hour (About 300-400 Books/Hour), Color Touchscreen Control Display Panel, 200 Memories For Repeat Orders Saveable Jobs, Double And Miss Detection, 1 Carriage Clamp Automatically Adjusted To The Input Book Thickness, Automatic Book Thickness Caliper, Milling And Roughening Station, Adjustable Milling Depth From 0mm To 3mm, Glue Tank With Dual Application Rollers And Side Gluing Roller (Adjustable Amount Of Glue And Glue Lenght Through The Color Touchscreen, Spine Gluing, Side Gluing, Nipping Station, Suction Drum Cover Feeder, 4x Cover Scoring/Creasing, PUR Gluing System SM Klebetechnik, Type: AN 533604, AGE: 2009, Serial No. 090838 ...

Model: JDM650-BIB Function: High-speed, Automatic Bag In Box Bag Making Machine; Tap & Nozzle Automatic Put Online Feature: 1. Bag have 4pcs film; 2. Punch on film, then welding nozzle, make bag; 3. Two units main unwinding; 4. Inverter motor control unwinding continuously, loop control system control tension steadily and reasonably; 5. Triple AC servo motor infeed film, ensure system tension reasonably and steadily, faster and correct, film non deformation; compare with normal machine, main drive is AC servo motor, ensure high production ratio and enough sealing time; 6. Vertical & horizontal use heating and cooling finalize the design, make sure good sealing; 7. Automatic nozzle structure is consist of nozzle stock bin, lifter, vibrating disk, belt, nozzle; 8. High degree of automation, nozzle reliability, ensure bag cleaning; 9. PLC control whole machine, HMI paramete ...

M.No: 612155217 Equipment / Additional information: Binds from 2 sheets to 60 mm max. cover width : 400 mm production up to 500 books/hr. LCD control panel glue tank with 2 application rollers, scrapers milling with high power waste extraction soft book ejection ramp, high capacity book cooling vertical stacker book size: max. 320x385 mm (spine) // min. padding mode: 90x75 mm (spine) min. perfect bind mode with BBR reception : 100x100 mm min. perfect bind mode without BBR reception : 140x210 mm cover size: max. 685x385 mm // min. 200x100 mm cover weight: 80-250 g/m2 cover pile height: 60 mm gluing temperatur: 140 - 165°C (sensitivity + 2°C) with vertical book stacker BBR - capacity 70 cm

bore capacity in steel (diameter): 30 mm throat: 255 mm bore stroke: 110 mm spindle speed:: 80 - 3490 U / min table-size: 400 x 400 mm spindle taper MT: 4 turning speed range:: 2 x 12 Stufen column diameter: 88 mm base plate: 600 x 370 mm total power requirement: 1,1 kW weight of the machine ca.: 155 kg dimensions of the machine ca.: 1,15 x 0,65 x 0,32 m Topline type heavy duty column drilling machine. For easy, frequent use. The drill chuck cover is made of high quality polycarbonate, and complies with the latest safety standards. It is equipped with an autostop switch. Separate emergency stop can be reached easily. Fitted out with a cooling table, softgrips,, adjustable depth stop and quick-acting drill chuck. The machine is equipped with a thermal cut-out. quick-acting drill chuck 1- 16 mm engraved nonius machine stops when drill chuck cover is opened depth stop autostop switch when o ...

HORIZON BQ 280 YEAR: 2013 COUNTER: APPROX. 700.000 – 1 CLAMP PERFECT BINDER - CLAMPS: 1 - SPINE GLUING: PURE - GLUE REFILL: BY PRE MELTER - SIGHT GLUING: HOTMELT - BOOK BLOCK THICKNESS: INTEGRATED MONITORING STATION (OUTSIDE THE CLAMP) - MILLING SECTION: WITH EXTRACTION - MILLING DEPTH: ADJUSTABLE - COVER FEEDER: SUCTION DRUM FEEDER WITH 4X SCORING - TECHNOLOGY: TOUCH & WORK - SAVEABLE JOBS: 200 MEMORIES FOR REPEAT ORDERS - SHEET SIZE: MAX: 385 X 320 MM; MIN: 135 X 105 MM - COVER SIZE: MAX. 660 X 385MM; MIN. 240 X 135MM - BOOK THICKNESS: MAX. 50MM; MIN. 1MM - COVER WEIGHT RANGE: 90 - 300 G/SQM - COVER PILE HIGHT: MAX. 70MM - SPEED: MAX. 500 CYCLES/H - DIMENSIONS: 3,055 X 905 X 1,520MM - POWER: 400V/ 50HZ - 2,7KW - WEIGHT: 900KG

Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...

1 Clamp Perfect Binder For Hotmelt Adhesive, Glue Vapor Extraction, Flaps And Creasing Tools, Envelope Double Sheet Control, Touch Screen With Simple Setting Via Icons, Preheating Timer, For Spine And Side Gluing, Copy Counter, Error Analysis, etc., Pneumatic Opening And Closing Pliers, Automatic Adjustment Of Nipper Opening According To Block Thickness, Side Gluing Disc According To Block Thickness, Back Creasing According To Block Thickness, Creasing Depth, Positioning Of The Rear Envelope Guide Rail According To The Envelope Width, Adjustable Milling Depth 0-3mm, Backworking Station With A Combination Tool With Dust Cutters, Height Adjustable Notching Knife And Ring Brush, Hotmelt Adhesive Basin With Two Application Rollers And Glue Squeegee And Integrated Side Gluing Unit With Slanted Discs (Production Possible Without Side Glue), Cover feeder with integrated double creasing unit (de ...

weight: 540 kg diameter: 1200 mm height: 1100 mm 0: 350 l total power requirement: 1,9 kW voltage: 350/50 V length in total: 1820 mm - with integrated manual separation ramp - control panel - Dosing pump for liquids - Capacity 382 liters - A soundproofing cover is also offered at extra cost! Sound insulation cover for VKUE 200 + The cover is controlled by a pneumatic piston + While the machine is running, the soundproof cover ensures for significant noise reduction. + It also prevents splashing of water or abrasives + It reduces noise emissions to less than 80 decibels. + The connection requires 6 bar General description: Our vibratory finishing system is suitable for: roughening, removing paint, decoating, deburring, derusting, descaling, de-oiling/degreasing, grinding as well as polishing and smoothing. The can also be used for non-metallic materials machine are used. Depending on the  ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

Slat aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, guide cover -Lamellar apron: protective cover, 2 pieces -Extendable: max. Length 920 mm -Width: 380 mm -Price / fee: complete -Dimensions folded: 380/100 / H95 mm -Weight: 2 kg / pc.

Fully Automated 4 Clamps Perfect Binder With PUR Gluing Unit from SM Klebetechnick GX2311, AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0,3 to 65mm, Cover Weight Range: 81,4 - 302,4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1350 Cycles/Hour, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Power Required: 400V Rotary Current 16A, 6,5 KW For Adhesive Binder and 400V Rotary Current 16A, 6,0 KW For Melting Unit, Standard Accessories

Buchdeckenmaschine - Bucheinhaengemaschine - Case Maker Smyth Freccia CM Year ca. 1980 - Serial-No. 409 Cover format (open cover) max. 110 x 155mm Cover format (open cover) min. 405 x 560mm Backlining width max. 8mm Backlining width min. 95mm Mechanical speed max. up to 30 covers/min. Automatic Case maker Automatic Turning-In Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Disperser with electronic speed variation diamac d 50 Disperser with electronic speed variation diamac d 50 Like new, never used, including auger for pouring powders and raw materials. The machine is sold including the auger (price agreements will be negotiated during the negotiation phase) CONSTRUCTION FEATURES Supporting metal structure Locking system adjustable bowl with tightening straps Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure Lifting piston with non-return valves and flow regulator AISI 304-316 stainless steel mixing shaft V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed Main electrical panel with driving inverter including filter and anti-interference inductance Normal or ATEX type machine side control pulpit. Industrial or AT ...

Built in 1998 Size max 460 x 310 x 60 mm min 125 x 100 x 3 mm Book block thickness max 60 mm min 3 mm Speed max 6.000 c/h Equipment gathering machine o 16 stations o gatherer ZU 801 o machine number gatherer 376 o -connected with perfect binder o 17 clamps o milling and roughening station o brushing station o hotmelt spine gluing unit o hotmelt side gluing unit o 2 premelters o stream cover feeder o cover scoring o cover pressing station o smooth lay down device o - option - not included o PURt spine gluing unit ; working condition

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

Built in 1997 Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6,000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 Controls • missing and double sheet control intermediate elements • Spiral Raceway • Hand Fed • Jogging element • Criss-Cross Delivery • -connected with Perfect Binder • 21 clamps • Jogging station • Milling and roughening station • Hotmelt Spine Gluing Unit • Hotmelt Side Gluing Unit • Premelter • Gauzing Station • Stream Cover Feeder • cover scoring 2 to 6 lines • Cover pressing station • Lay down device • Shingle Conveyor Delivery optional equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • Conveyer system approx. 20 m • three knife trimmer Kolbus HD 150

used chain conveyor belt Manufacturer: EuroTec Type : KB 1400 Technical data: Chain type : M 112 Feed length : approx. 6,150 mm Path length : approx. 9,500 mm Belt width : approx. 1,400 mm Conveying width : approx. 1,300 mm Steel body of the conveyor belt : made of St 37 Drive motor with brake : 5.5 kW Switch EMERGENCY STOP : yes Switch START- STOP : yes Lubrication with drip oilers : electric (MURDFELDT) Side tray heights in the feeding area: approx. 500 mm dto. in the climbing section : approx. 1,000 mm Climbing angle : approx. 30°/-20° Gooseneck : yes lower belt cover in the climbing area up to a maximum of approx. 2.50 m intervention height : yes Material outlet chute : yes Conveyor belt supports : yes technical design of the tape: Drive Manufacturer : Getriebebau Nord Type : Bevel gear jack motor Protection class : IP 55 Chain Type : M 112  ...

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: EBA Cutting Machine 551 LT with side tables and light barriers Electro-mechanical knife drive Air table Chpjpskqes Hydraulic drive for press beams Infinitely variable pressing pressure (min. 200 daN, max. 1100 daN) with display via pressure gauge Foot pedal for pre-pressing or as a cutting indicator Press beam cover Electrically operated backgauge with professional program control electronic handwheel with infinitely variable speed for manual backgauge fine adjustment Optical cutting indicator with bright light-emitting diodes (LEDs) Press beam guided on both sides for uniform pressing pressure Djqedv Precision backgauge spindle adjustable backgauge rake with narrow pitch (32 mm) and plast ...

#5304 Horizon BQ-140 Age: 1998 Available: August 2022 Location: Germany Max Binding Width: 400 mm / 15.7" Binding Thickness: 1 – 30 mm / 0.04 – 1.18" Cover Dimensions: 400 x 620 mm / 15.7" x 24.4" Min. Cover Dimensions: 100 x 200 mm / 3.9" x 7.9" Cover Stock Thickness: up to 0.5 mm / 0.02" Cycle Spped: up to 25 cy/h Hot melt Glue (H-110)

Hongming HM-ZD6418E Automatix Rigid Box Making Line (Box erecting and enrobing machine) Age: 2017 The Automatic Rigid Box Making Line is suitable to make various Paper covered rigid cardboard premium boxes, such as shoe boxes, mobile phone boxes, wine boxes, etc. The wrapped box's max height is 130mm, with max folding-in depth of 100mm. Features: 1. Suit to all kinds of rigid boxes in mass production 2. Parameter adopts computer digital setting 3. Auto error stop and display 4. Automatic feeder for Cover paper and cardboard 5. 24-hours control for glue pre-heating 6. Wrapper can input 300 product formulas 7. Corner pasting part with independent man-machine control and heating system 8. Adopt YASKAWA servo control system 9. Spotter by electric eye tracing system and hydraulic pneumatic rectifying system to spot correctly (spotting accuracy ±0.2mm) 10. Wrapper can au ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)33 kWC-Axis Speed-200 rpmSpeed range20 - 4000 rpmTorque (100% DC)580 NmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Shank diametre according to DIN 6988040 mmNumber of tool stations12 Number of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

Additional title: Buffer tank (production of soft drinks), Capacity: 130 hl, Working pressure: 5 bar, Width: approx. 1.760 mm, Height: approx. 6.910 mm, Material: stainless steel, Position: vertical, Base construction: torospherical head, 4 feets, Features: conical manhole DN500 with weld-on flange DN80, inlet fitting DN80 (frame below), 1 connection thread DN65 (cover), 2 weld-on rings for PT100 (frame), 1 flange with groove DN65 (cover), 1 sleeve R1 / 2 (cover), , Periphery: After consultation, we can equip the tank with the desired fittings., Code: 18

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmC-Axis Speed-200 rpmTorque (100% DC)580 NmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-4000 rpmNumber of tool stations12 Power max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTransverse stroke300 mmTurning diameter410 mmMax. Turning Length800 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

Used Alfa Laval decanter centrifuge model Aldec 40. New: 2007. The set includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - centrifuge control cabinet - control cabinet of the compaction installation Technical parameters of the centrifuge: - maximum cake density 1.2 kg/dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - 2-stage planetary gear - gear max torque 2.5 kNm Gear ratio 1:159 - drum length 1460 mm - drum diameter 353 mm - cover/cover material AISI 316 - inner surface of the AISI 316 cover Centrifuge dismantled. All devices were technically efficient and in operation until dismantling.

Crathern & Smith / Perondi fully automatic rigid box making line Make Crathern & Smith / Perondi Model IA630 Year 1989 Blank size min: 100 x 120 / max: 450 x 880 mm Cover material weights 80-140 grams Box size min: 50 x 125 / max 400 x 600 mm Box height 12 to 120 mm Speed up to 36 pcs a minute Configuration Crathern & Smith / Perondi IA630 feeding + gluing of cover material Crathern & Smith / Perondi TS600 4/corner stayer for the board material Crathern & Smith / Perondi PA600 spotter by sensors Crathern & Smith / Perondi SV80 wrapper Crathern & Smith / Perondi MC80 warm glue meltiong pot with viscocity device Example boxes luxery boxes, games, phone boxes, and many more Make Barmedia details 2 heads, adjustable by hand wheel, for both cover material to make the blanks and for the inner board material to cut out the corners Available Direct

Bolt clamp, 10 pieces, with terminal cover, 17 pieces WEIDMÜLLER WFF 70/32 103180 Rated cross-section: 70 mm² Rated voltage: 1.000 V Nominal current: 192 A Mounting type: DIN rail TH35 Clamping screw: M 8 Material of the insulating body: Thermoplastic Terminal cover: WAH 70 106456 Material: Polyamide 66 New ! Dimensions ( single terminal ): 133 x 32 x 67 mm Dimensions ( single terminal cover ): 90 x 31 x 31 mm Dimensions ( packaging ): 360 x 150 x 130 mm / 320 x 110 x 55 mm

Rider safety element, with contact protection cover, 7 pieces RITTAL SV3418.010 400 V AC 50 / 60 Hz 63 A 7x Protection cover: SV3418.020 New ! Dimensions ( one fuse element ): 210 x 27 x 50 mm Dimensions ( one anti-contact cover ): 210 x 27 x 18 mm Dimensions ( packaging ): 305 x 220 x 80 mm

Equipped for ALU/PVC and ALU/ALU operation • Blister format range (W x L) min. 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Capacity 15 - 50 mould cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Moulded foil Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamps • Cover film Ø max. 240mm, core Ø 76 mm, pneumatic clamp • Glue joint detection for moulded and sealing film • Product feeder Uhlmann SimTab 2.1 for tablets/capsules • Feed according to moulds and seals • Print image control with cover film stretching • Crack and pore control moulding film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC molding film • Heating station with suction for the use of PVDC foil • Mechanical forming station for ALU moulded foil • Contents control VisioChrom color wit ...

Built in 2007 Size max: 430 x 320 x 60 mm Size: 140 x 100 x 3 mm working hours: 17.900 h Speed:max 5.000 c/h Equipment: gathering machine: • 24 stations • 24 feeder 1571 controls: • ASIR automatic signature image reader • ASAC automatic self-adjusting calipers perfect binder: • 20 clamps • double kombined spine preparation station • hotmelt spine gluing unit • hotmelt side gluing unit • rotary coverfeeder • cover scoring • cover pressing station • 2nd cover pressing station • lay down device optional equipment --- not included ---: • PUR spine gluing unit Bl7yrcc8tb • PVA (cold glue) spine gluing unit • conveyor belts to trimmer • trimmer Müller Martini Merit

Slat aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, guide cover -Dimensions: 630/205/H5 mm -Weight: 3.5 kg