counter used for sale

Orange juicer CITROCASA 8000 SB-ATS Advance The 8000 SB ATS (Automatic Transport System) sets completely new standards in terms of ease of use and automation. The ideal solution in the highly frequented self-service area. The automatic transport system keeps the juice zone free of any peels, kernel or pulp residues Start of the pressing process by pressing the tap High capacity of the fruit storage basket (21 kg) Stainless steel design of all important components Digital counter of the total pressed oranges purest orange juice through sCs up & down cutting system Easy cleaning thanks to Double Cover and Cross Holder Machine stops automatically when the shell container is full Capacity: 40 oranges per minute Dimensions machine: H180 x W100 x D65 cm Dimensions storage trolley: H100 x W52 x D53 cm Machine & wagon can be driven on deflection ro ...

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

Spare blade for Längsschneiddysteme (slitting lines) 10 piece circular knives (upper blade) 100 x 70 x 1, 2 (or similar size) with 10 bit holder shaft. NEW. 10 piece counter knife (bottom) 78 x 55 x 10 (od similar dimensions). NEW. For slides or paper industries. Alternative dimensions on request.

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...

Package from one place in germany: Printing machine: ABDICK 9840 Plate size: 330 x 492 Kompac dampening system Mirror roller Squeegee unit for coloring (new) Printing and impression cylinders must be readjusted plus material: 1 blanket new 100 printing plates Printing machine: ABDICK 350 cd Plate size: 254 x 381 Kompac dampening system 1 new application roller (reserve) Folding machine: GRAFIpli 3810 S Tools: 2 folding pockets 1x grooves / grooves Perforate 2x Counter: FKS series 3800 Sorting unit: Duplo DC-10 mini Gathering up to 10 sheets of A3 Stainless steel table vertically / horizontally adjustable Stapling unit: NAGEL Foldnak 8 Brochure Street (up to 10 sheets DIN A3) Trimmer: NAIL Cutting machine: EBA 551 LT Extension: Side table left (NEW - not complained) plus replacement knife with assembly tool Package Price: on request

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Built in 1997 Size max 660 x 1.020 mm Equipment feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife o polyurethane-steel folding rollers delivery: o belt delivery ; working condition

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife delivery: o belt delivery; working condition

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 220 mm Square: 220 mm hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 18 m/min up to: 110 m/min Band width: 1.3 mm Voltage 50 Hz 3x: 400 Volt Power: 4 kW Machine´s weight about: 1750 kg Overall dimensions machine: Length: 2050 mm Width: 2050 mm Height: 1300 mm Various accessories: Set of saw bands Roller conveyor Coolant system Material stops Workpiece counter

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Slide pressure: 80 to Total capacity: 800 kN Tool clamping surface: superior: length: 420 mm Width: 420 mm inferior: length: 420 mm Width: 420 mm Die stroke from: 0 mm up to: 90 mm Number of strokes: stepless from: 30 s/min up to: 120 s/min Tool height: from: 150 mm up to: 250 mm Band width: 90 mm Maximum thickness of material: 3 mm Voltage 50 Hz 3x: 380 Volt Main motor: 5.5 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 2970 mm Width: 1665 mm Height: 2420 mm Various accessories: Forward feed device Workpiece counter

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Deep Hole Drilling Machines Kramatorsk KJ1910 used machine but very good mechanical condition. Machine can be inspected in our warehouse in Gussago BS (Italy) Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment o infeed from the right side o automatic infeed with integrated pre stacker o cut counter o Equipment for sheet-fed o 1 set of clamping plates and holders o 3 sets of cutting sticks o 2 set of knives o external knife changing device o central lubrication o belt delivery

Printshop Package from one place in poland: 1. 8 up Violet CTP Heidelberg Prosetter 102 - Type 2170 - ID No. 05805023 - date of production: March 2004 - efficiency: 12 plates in B1 format/h (2400 dpi) - in the beginning of 2017 new laser mirror set - current counter below (from CTP User Interface) 2. Developer Glunz & Jensen Raptor PRO 85P - model MP 85 - date of production: April 2005 - the set consists of cooler E04535 - new pre-heating rubber and silicone rollers in July 2017 - up-to-date exchange of spare parts (gears, roll mounting) 3. Stacker for AGFA boards - Type ST 125SX - May - 05/2012 4. Additional second CTP imagesetter to be sold for parts - Heidelberg Prosetter 102, D-69115 - Type 2170 - ID No. 05805023 - date of production: August 2005 - the imagesetter does not include: engines, sliders and laser mirror set (head) 5. The set consist ...

We offer you a railing post from SSI Shepherd for sale. Included in delivery are: 01x railing posts, second choice Material color: Ral 7001 Silver Gray Manufacturer: SSI Schäfer Total height: approx. 1.130mm Total width: approx. 32 mm Total depth: approx. 55 mm Base plate: 120 x 80 x 15 ( W x D x H) Diameter round tube opening: approx. 35 mm Distance of holes: 500 mm ( center hole ) Material thickness: approx. 3 mm Weight pcs.: approx. 3,64 Kg Notes: - The railing post is open from above. If desired, you can get matching plastic caps. - The heights of the round tube openings are: 575 mm and 1,075 mm ( Measured from lower edge base plate to lower edge round tube opening ) - suitable for round tubes with a diameter of 34-35 mm - For fastening we recommend 4 screws M8 (8.8) - Slip-through opening must not be larger than 900 mm. - If the railing posts are drilled t ...

Tool-fraes machine Ruhla with very extensive trailer to be seen in top condition under electricity Type FUW Built in 1986 Tool holder SK40 stepless feed control Speed control via gearbox Weight approx. 1,800kg Accessories: Box table Quick-aeuferkopf with collet holder and collet set Fine drilling head with collet holder horizontal sub-apparatus universal sub-device SK40 with spiral-fraes device (probably unused) D2evxjf Counter-holder for horizontal fraes long fray edhism 2 stueck Further accessories at an additional cost. Special price

Post of 9 stueck submersible pumps and dirty water pumps Manufacturer: Heath Pumps Pumpex (Sweden) Flygt Spt Soendgerath Power ratings from 1.5kw to 6.5kw Pumping capacities up to 120m3/h Foerderhoehe up to 80m Various controls for pumps also with operating hour counter, with float switch or with level monitoring New price of a large pump 4,500.-EUR The pumps were in use for a maximum of 3 years and have been stored ever since. Special price

We offer you a railing post from SSI Shepherd for sale. Included in delivery are: 01x railing posts, second choice Material color: Ral 7001 Silver Gray Manufacturer: SSI Schäfer Total height: approx. 1.030mm Profile: 55 x 30 x 2.0 mm (D x W x S) Base plate: 120 x 80 x 15 (W x D x H) Diameter round tube opening: approx. 35 mm Distance of holes: 315 mm ( middle center hole ) Weight pcs.: approx. 3,37 Kg Notes: - The railing post is open from above. If desired, you can get matching plastic caps. - The heights of the round tube openings are: 345, 660 and 975 mm ( Measured from lower edge base plate to lower edge round tube opening ) - suitable for round tubes with a diameter of 34-35 mm - For fastening we recommend 4 screws M8 (8.8) - Slip-through opening must not be larger than 900 mm. - If the railing posts are drilled through a beam ( CS, C or IPE ), then no count ...

Iveco emergency generator 190 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - 6 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 180 / 200 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 335 x 116 cm - Weight: 1980 kg - Tank volume: 400 liters - Sound level: approx. 67 dB (7m) - Consumption: 18.6 l/h (50%) / 27.9 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 175 / 192 kVA - in soundproofed housing - with digital control - integrated frame tank - Battery -  ...

Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water Cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - 2 cylinders - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 lt ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: UK 14 ½ Doppel-Z – Kneter Utilizable contents: approx. 350 l Weight: approx. 2.800 kg different: - machine need New painting, mechanical and electrical contoling before work - product touching parts in stainless steel - double jacked for heating - motorized tilting about the front axle with tilt motor - Working hours approx 2947 (read from counter) We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. EXW - ex Warehouse Hess. Lichtenau, unpacked

MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark

WILA Central crowning rail Mint unused Crowning device bending matrices up to 2500 mm Dimensions: Lg approximately 2750 mm, total for press brake dies 2500 x 70 mm Crowning adjustment Central with manual hand crank with counter Herstellernr. 11358. year of construction: 1987

For sale a milling head without counter bearing

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg  ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

Iveco emergency generator 135 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 125 / 138 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1470 kg - Tank volume: 290 liters - Sound level: approx. 68 dB (7m) - Consumption: 14.4 l/h (50%) / 20.2 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 125 / 138 kVA - in soundproofed housing - with digital control - Tank - Battery - Exhaust / silencer - - - -  ...

Iveco emergency generator 100 / 110 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1390 kg - Tank volume: 290 liters - Sound level: approx. 66 dB (7m) - Consumption: 12.5 l/h (50%) / 17.6 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco gener ...

1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Iveco emergency generator 60 / 66 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 220 x 113 cm - Weight: 1170 kg - Tank volume: 240 liters - Sound level: approx. 64 dB (7m) - Consumption: 7.2 l/h (50%) / 10.3 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco generator set  ...

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Iveco emergency generator 80 / 88 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 80 / 88 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1340 kg - Tank volume: 290 liters - Sound level: approx. 66 dB (7m) - Consumption: 9.4 l/h (50%) / 14.0 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of delivery: - Iveco generator  ...

Used packaging line for capsules into jars made by Pharma Packaging Systems/Robak company PPS capsule counter - 2 pcs Manufacture year: 2015 Production country: England Max capacity: up to 14 op / min capsules of 000 in the amount of 300 pcs up to 80 op / min smaller quantities Counting range: 10 - 300 items Possible packaging: cylindrical jars 150mm in diameter and up to 210mm in height Labeling: self-adhesive wrapping labels Codification: InkJet on the bottom of the packaging Required media: en. electric, compressed air

width 52 cm age 1989 flat pile feeder TREMAT 4 folding pockets in the parallel fold section 1 folding knife in the cross fold section counter EVZ noise absorbing hood stream delivery Ref: ST190257A Please ask for price. We ship and install worldwide!

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

• Year of manufacture 2013 • Print Counter: 21.3 million A3 sheets | 6.3 million meters • Print Technology: Dry Toner electrophotography • 5/5 one-pass duplex | C M Y K + White/Spot Colour • Unwinder • Mode of operation: Roll to Sheet • BST with automatic web guide • Cutting Modules • Stacker Module with bypass • Resolution: 1,200 x 3,600 dpi with variable dot density • Media width: 320 mm up to 512 mm Printing width: 504 mm • Printing speed: Up to 15,600 pages / hour (depending on the substrates) • Web Speed: Up to 19.2m/min • Media weight: 40 - 350 gsm | 550 μm • Substrates: Papers, paperboard, synthetic media and labels • Digital Front End: Xeikon X-800 • The System was in Xeikon Service Contract

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr