133,942 used machines on RESALE, but how to find them? Machine Search
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used dough sheeter Fritsch 600 with digital control and automatic reel from 2008 for sale and immediately available in our warehouse in Bielefeld. -Stainless steel dough sheeter Fritsch Rollfix -with reel -with touch display -60 or 65cm belt width -Year of construction : 2009
Set including 4 Euro pallets of flat cartons and stacked cardboard sheets. The boxes are packed in strapped piles on wooden pallets and come in various formats. This set can be suitable for packaging, packaging, product protection, logistics, moving or recycling activities. The lot is sold in one set according to the photos. Content included according to photos. Auction-ID: A1-48554-300
Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: CAT-50 ISO spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h ...
Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...
1x HS-8 lever plate shear, working length 200 mm, plate thickness 6 mm, flat steel 70x6 mm, round steel 13 mm, weight 8 kg, delivered in original packaging Auction-ID: A1-48552-56
Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm
work piece width: max 145 x 150 mm band speed: 1.0 - 8.0 m/min workpiece height: max. 100 mm total power requirement: ca. 5.5 kW weight of the machine ca.: 900 kg. dimensions of the machine ca.: 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDG ...
Height=1.75 m, Overall length= 1.55 m, Overall width= 1.45 m, Working width: 650 mm Power supply: 3 × 400 V / N + PE Frequency: 50 Hz Total power: 1.8 kW Total current: 11 A Machine number: 02016-29122 condition: refurbished In store Made in Germany Description Refurbished Fritsch Rollfix 70/650 E NU programmable dough sheeter suitable for bakeries and pastry production The machine is equipped with an electronic control panel with stored production programs a flour duster and conveyor belts on both sides Year of manufacture: 2002 Programmable electronic control Flour duster Stainless-steel construction Refurbished and tested
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1398.6 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 € : 2895.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...
Technical details Manufacturer: Hunkeler / Tecnau Type: Paper sheeter line with splitter and merge conveyor Year: 2005 Configuration: - Hunkeler UW6 paper unwinder - Unwinder serial: VB 7183 - Tecnau TC1012 CMC electromagnetic high-speed cutter - Split and merge conveyor system - Roll-fed paper handling system - Automatic sheet cutting line Application: - Paper converting - Digital printing finishing - Commercial printing - Paper sheet production - Industrial paper processing Construction: - Automatic roll-to-sheet production line - Electromagnetic high-speed cutting technology - Integrated paper unwinding and conveying system Condition: Used Observed condition: - Electrically connected - Production stopped in 2024 - Reported in good condition - Unwinder and high-speed cutter included - Operational status not independently verified Auction-ID: A7-49767-12
Technical details Manufacturer: DCM Model: BPL 2/1962 Type: Roll-to-roll flexographic printing press Configuration: - Central impression drum (CI) printing system - 3+1 colour printing configuration - Roll-to-roll operation - Roll-to-sheet operation capability - Inline integration capability for bag machines and sheeters Printing width: 520 mm Anilox rollers: - Steel - 80 L Sleeve system: - Metal sleeve system - Multiple steel printing sleeves included Maximum unwinder diameter: 1200 mm Maximum rewinder diameter: 1200 mm Application: - Flexible packaging printing - Paper printing - Plastic film printing - Bag production - Label and packaging applications Construction: - Central impression drum flexographic press - Roll-fed industrial printing system Condition: Used Observed condition: - Machine stopped production in 2024 - Electrically connected - Steel p ...
The HOLZMANN TBS1320N sheet metal shears / guillotine shear for cutting your sheet metal up to a thickness of 1.5 mm with foot pedal control. Description: Material stop with length adjustment up to 900 mm and scale. rectangular material stop on the recording table. Automatic hold-down to fix the sheet metal in place. Simple and user-friendly operation by foot pedal operation. Auction-ID: A1-47361-80
Key data: 2000 mm, 8 mm, 6 mm
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...
including all electrical cabinets for controlling the liftmaster; Auction-ID: A1-49836-16
material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...
Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,
New Trapezoidal Steel Sheet T-35 – RAL 9006 Trapezoidal steel sheet T-35 for roofing and wall cladding applications, made of coated steel. Specification: Profile: T-35 Length: 6,500 mm Thickness: 0.5 mm Color: RAL 9006 (white aluminium) Coating: protective + anti-condensation (felt) Anti-Condensation Layer: absorbs moisture prevents water dripping reduces corrosion risk protects structure and stored materials Packaging & Delivery: Sheets secured for transport. Auction-ID: A1-49902-53
Object Extensive stock of plastic sheets for mold making. The stock includes sheets in different formats, thicknesses and colors, as well as various cuts. Contents - Plastic sheets in different sizes and thicknesses - Different panel colours and material finishes - Large panels as well as narrower blanks - Partially already cut panels Auction-ID: A1-50026-94
Object Extensive stock of plastic sheets and plastic blocks for mold making, model making and the production of molds and models. The stock includes different plates, blocks and already processed mold elements on several pallets. Contents - NECURON model and tool plates, including NECURON 730 and NECURON 800 - Plastic blocks and sheets in different dimensions - Partly already cut or processed form elements - Different colours and material finishes Auction-ID: A1-50026-93
Machine number 139/6238/11
Product Name: TATA Steel SAB 35/1035 Product Type: Roofing Sheet/Wall Plate Size per plate: approx. 6500 mm Total overview: 6500 mm x 40 pieces Thickness: 0.70 mm Operating width: 1035 mm Profile height: 35 mm Color: Red Fire behaviour: A1 Material: Structural Steel Total weight: approx. 2300 KG Auction-ID: A1-41961-81
4 Color Sheet-Fed Offset Press Ryobi 3304H 4 Farben Offsetdruckmaschine / 4 Color Sheet-Fed Offset Press Ryobi 3304H Baujahr / Year 1999 - Serial-No. 1532 Size max. Size 340 x 460mm Feuchtwerk / Dampening System VARN Compac Bedienpult / Console for ink and register PCS-F Automatische Wascheinrichtung / Automatic washer for roller and blanket Verchromte Cylidner / Chromed cylinders Puderapparatt / Power spray Kompresor / Compressor Guter Zustand / Good condition.
2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included
2 Color Offset Press Heidelberg SM 52-2P+ Plus version with Perfecting 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg SM 52-2P+ Baujahr / Year 1997 - Serial-No. 201301 Druckzahl / Impressions 54 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Perfecting 1/1 - 2/0 CP-Tronic, Autoplate, Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included
5 Color Offset Press Ryobi 925 P with PCS-G Control Desk and PDS-E color Control. 5 Color Offset Press Ryobi 925P Year 2011 – Serial-No. 1348 Size min. 410 x290mm – max. 640 x 920mm Impressions 79 Mio. PCS-G Control Desk PDS-E color control Ryobimatic Continuous Dampening System Automatic Ink-roller washing device Automatic Blanket washing device Grafix Powder Sprayer Perfecting 1/4 - 5/0
Professionally dismantled and stored - all that remains is to be packed and loaded safely for transport Auction-ID: A1-50085-11
Technical data of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 4 mm. Maximum cutting capacity in stainless steel 2.5 mm. shape of the stamp, Rectangle The HBM E nibbles are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50084-190
Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40
Sheet metal bending machine with: – Electrically adjustable rear roller – Digital display for the movement of the rear roller – Hardened rollers – Conical rolling – Swivelling upper roller – Brake motor – Emergency stop – Documentation – Connection voltage 400V Sheet width 1070 mm Sheet thickness 4 mm Stand width 1100 mm Upper roller diameter 110 mm Total power requirement 5.0 KW Machine weight approx. 1.2 t Space requirement approx. 2.0 x 0.9 x 1.1 mm Auction-ID: A7-50084-137
Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46
Combi machine, sheet metal roller, Beveling and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-50084-113
Sheet metal bending machine 3 rollers - 2 driven rollers - Footswitch - Emergency stop facility Sheet width 2100 mm Sheet thickness 2.0 mm Stand width 2150 mm Roller diameter 90 mm Total power requirement 1.5 KW Machine weight approx. 0.7 t Space requirement approx. 2.5 x 0.7 x 1.3 mm Auction-ID: A7-50084-84
Technical data of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 3 mm. Maximum cutting capacity in stainless steel 1.8 mm. shape of the stamp, Rectangle The HBM E nibbles are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50084-170
Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-50084-206
Combined sheet metal processing machine with: - bending, Tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. - Rolling, Roll diameter 42mm - scissors, max. 1015 x 1mm Material width 1015 mm Material thickness 1 mm Speed by hand Weight 0.25 t Dimensions L x W x H 1.4 x 0.6 x 0.75 m Condition: never used / new (5) Auction-ID: A7-50084-65
Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out upper roller - Safety device emergency exit line - Documentation - 400V Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Top roller diameter 95 mm Total power requirement 1.1 KW Machine weight approx. 0.37 t Dimensions approx. 0.95 x 0.76 x 1.25 mm Auction-ID: A7-50084-68
Sheet metal gripper Load capacity 1000Kg Sheet thickness 1 - 15mm Weight 8.0Kg Dimensions 350 x 200 x 100mm Condition: never used / new (5) Auction-ID: A7-50084-193
Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41
working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden
working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden
maximum number of results exceeded
please refine your search
50 € 
