We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,375 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Clamping head HAINBUCH SB.K.0015-2 100 BZ 1 227 411 5923706 B3 Dimensions: 154 x 154 x 60 mm
used
Clamping head HAINBUCH SB.K.0173 3807222001 Clamping diameter: Ø 60.3 mm Dimensions: 154 x 154 x 60 mm
used
Clamping head HAINBUCH SB.K.0015.03 SPANNTOP 1208742 Dimensions: 154 x 154 x 60 mm
used
Clamping head HAINBUCH SB.K.0173 Clamping diameter: Ø 60.3 mm New ! Dimensions: 154 x 154 x 60 mm
used
Spannkopf HAINBUCH SB.K.0015-2 100 BZ 1 227 411 5923706 B New ! Dimensions: 154 x 154 x 60 mm
used
Clamping head HAINBUCH SPF 446 00 - 03 ( SPF44600-03 ) 3 321 580 B3 Clamping diameter: Ø 50.3 mm Dimensions: 154 x 154 x 60 mm
used
Clamping head HAINBUCH SPF4460020080 BZ - 3 ( SPF4460020080BZ-3 ) 3321580B3 Clamping diameter: Ø 50.3 mm Dimensions: 154 x 154 x 60 mm
used
2 clamping brackets Dimensions: 3000 x 1200 mm
used
Stock Number: 3805 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 983 004 N Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 Kg
used
Clamping cylinder, hydraulic cylinder, single-acting, spring-returning WMW Type 25 TGL 30-7311 piston force: max. 7800 N piston diameter: Ø 25 mm rod diameter: Ø 14 mm stroke: 20 mm nominal pressure: max. 16 MPa (160 bar) New ! Dimensions: 120 x 36 x 36 mm
used
Clamping cylinder, hydraulic cylinder, single-acting, spring-returning WMW Type 25 TGL 30-7311 piston force: max. 7800 N piston diameter: Ø 25 mm rod diameter: Ø 14 mm stroke: 20 mm nominal pressure: max. 16 MPa (160 bar) New ! Dimensions: 120 x 36 x 36 mm
used
Clamping cylinders, round cylinders, hydraulic cylinders, double-acting HEB, HYDRAULIK-ELEMENTEBAU GmbH Type Z 100 Z 100-G-32/16/20-D/S5Z 100-G-32/16/20-D/S piston diameter: Ø 32 mm rod diameter: Ø 16 mm stroke: 20 mm nominal pressure: 100 bar rod thread: M14 x 2,0, Length: 20 mm Mounting thread: G2 ( inches ), length: 10 mm New ! Dimensions: 140 x 47 x 47 mm
used
Clamping cylinders, hydraulic cylinders, round cylinders, double-acting WMW Type 25 TGL 45124 piston force: max. 15,6 / 9.2 kN ( push / pull ) piston diameter: Ø 25 mm rod diameter: Ø 16 mm stroke: 25 mm nominal pressure: max. 32 MPa ( 320 bar ) rod female thread: M10 x 1.5, Depth: 18 mm Mounting thread: M30 x 1.5, Length: 20 mm New ! Dimensions: 156 x 55 x 55 mm
used
Clamping cylinders, small cylinders, hydraulic cylinders, round cylinders, single-acting PAGUS Type ZKP-6300-C piston diameter / rod diameter: Ø 45 mm Material: Brass Stroke: 20 mm Female connection: 1/4 ( inch ), Depth: 15 mm Flange diameter: Ø 70 mm, Length: 25 mm Case diameter: Ø 60 mm, length: 35 mm New ! Dimensions: 70 x 70 x 65 mm
used
Clamping cylinder, hydraulic cylinder, double-acting WMW, HOHENSTEIN stroke: 135 mm rod diameter: Ø 40 mm as a spare part for Hohenstein RBT400 ! used ! Dimensions: 270 x 95 x 80 mm
used
Clamping cylinders, hydraulic cylinders, double-acting WMW, HOHENSTEIN stroke: 150 mm rod diameter: Ø 56 mm among others as a spare part for Hohenstein RBT400 ! used ! Dimensions: 360 x 135 x 130 mm
used
Clamping roller coupling, freewheel, clamping roller freewheel PAGUS A63 TGL 27862 Nominal torque ( Mt ): 63 kpm ( approx. 618 Nm ) Inner diameter: Ø 45 mm 2x keyway: Groove width: 14 mm Outer diameter: Ø 110 mm 2x Clamping spring groove per side: Groove width: 14 mm New ! Dimensions: 110 x 110 x 50 mm
used
Clamping roller coupling, freewheel, clamping roller freewheel PAGUS A160 TGL 27862 Nominal torque ( Mt ): 160 kpm ( approx. 1570 Nm ) Inner diameter : Ø 55 mm 2x keyway: groove width: 16 mm outer diameter: Ø 130 mm 3x clamping spring groove per side: groove width: 16 mm New ! Dimensions: 130 x 130 x 70 mm
used
Clamping roller coupling, freewheel, clamping roller freewheel STIEBER AE 25 PU Nominal torque ( Mt ): 285 Nm Inner diameter: Ø 25 mm 1x keyway: groove width: 8 mm Outer diameter: Ø 80 mm 2x Clamping spring groove per side: Groove width: 9 mm New ! Dimensions: 80 x 80 x 38 mm
used
Magnetic clamping table, electric ELECTROMAGNET ELSTERWERDA C400 TGL10272 Outer diameter: Ø 400 mm Power consumption: 125 W Operating voltage: 115 V DC Current consumption: 1,1,15 A Flange diameter: Ø 250 mm bolt circle diameter: Ø 315 mm 4x threaded hole: M12 x 1.75, depth: 15 mm used, tested ! Dimensions: 400 x 400 x 90 mm
used
Clamping table, angle table, clamping angle PAGUS 1000 x 750 x 500 Clamping area 1: 870 x 700 mm web width: 32 / 128 / 128 / 128 / 128 / 38 mm ( from the front ) with drip tray: 1000 x 750 x 50 mm Clamping area 2: 1000 x 500 mm web width: 92 / 128 / 128 / 87 mm ( from above ) Groove width: 22 / 37 mm groove depth: 41 mm used, tested ! Dimensions: 1000 x 750 x 500
used
Clamping angle PAGUS 850 x 640 x 400 mm Clamping area 1: 850 x 640 mm material thickness: 32 mm Clamping area 2: 850 x 400 mm material thickness: 35 mm used, tested ! Dimensions: 850 x 400 x 760 mm
used
Clamping angle PAGUS 700 x 520 x 390 mm Clamping area 1: 700 x 520 mm Material thickness: 29 mm Clamping surface 2: 700 x 390 mm Material thickness: 29 mm used, tested ! Dimensions: 700 x 390 x 620 mm
used
Clamping angle PAGUS 375 x 165 x 165 mm Clamping area 1: 375 x 165 mm material thickness: 18 mm Clamping surface 2: 375 x 165 mm material thickness: 16 mm slotted holes: Ø 17.5 mm, Length: 80 / 90 mm used, checked ! Dimensions: 375 x 165 x 165 mm
used
Clamping prism, clamping prism WMW 300 x 100 x 80 mm ( length x width x height ) 2x Support surface: 300 x 54 mm 2x side area: 300 x 80 mm 1x Base area: 300 x 100 mm Beam angle: 90 ° As good as new ! Dimensions: 300 x 100 x 80 mm
used
Clamping plate PAGUS Outer Ø: 230 mm Height above base plate: 35 mm Groove width: 10 / 17 mm < br /> groove depth: 10 mm clamping plate rotatable clamping plate can be moved by 32 mm from the center of the base plate in any direction clamping is pneumatic Base plate: 355 x 275 x 28 mm. Height: 28 mm used, checked ! Dimensions: 355 x 295 x 65 mm
used
Clamping device with 3-jaw chuck, three-jaw chuck PAGUS Three-jaw chuck: Ø 190 mm Total height with jaws: 160 mm Base plate: Ø 285 x 30 mm Clamping plate for lathe chuck: Ø 250 x 28 mm used, tested ! Dimensions: 285 x 285 x 160 mm
used
pneumatic clamping drive NAREX JU 30 Clamping force: max. 60 kN at 5 seconds Clamping time Operating pressure: 0.4 - 0.6 MPa ( 4.0 - 6.0 bar ) Driver: 28 x 28 mm with adapter: 17 x 17 mm, 19 x 19 mm, 22 x 22 mm New, with documents ! Dimensions ( clamping drive ): 195 x 131 x 160 mm Dimensions ( packaging ): 210 x 150 x 180 mm
used
Clamping device, machine vice PAGUS Wingspan: 15 - 195 mm Jaw width: 68 mm Jaw height: 235 mm Jaw thread: M24 x 3,0, Depth: 45 mm Spindle square: 22 x 22 mm Base: 320 x 240 mm hole spacing: 250 x 200 mm hole diameter: Ø 22 mm , length. 30 mm ( U-hole ) used, tested ! Dimensions: 490 x 240 x 345 mm
used
Clamping prism, clamping prism WMW 200 x 72 x 51 mm ( length x width x height ) 2x Support surface: 200 x 39 mm 2x side area: 200 x 51 mm 1x Base area: 200 x 72 mm Opening angle: 90 ° New ! Dimensions: 200 x 72 x 51 mm
used
Clamping prism, clamping prism PAGUS 274 x 89 x 97 mm ( length x width x height ) 4x Support surface: 274 x 40 mm 2x side area: 274 x 97 mm Beam angle: 90 ° used, tested ! Dimensions: 274 x 89 x 97 mm
used
Clamping cube PAGUS 150 x 147 x 100 mm ( length x width x height ) 1x Support surface: 150 x 147 mm 2x side area: 100 x 147 mm 1x base area: 150 x 147 mm New ! Dimensions: 150 x 147 x 100 mm
used
Clamping angle WMW Clamping area: 1000 x 800 x 70 mm Bridge width: 86 / 5x 132 / 86 mm < >Groove width: 28 / 50 mm Groove depth: 50 mm Mounting surface: 630 x 800 x 54 mm Bridge width: 5x 158 mm Groove width: 2x 162 mm Groove depth: 12 mm used, tested ! Dimensions (horizontal): 1000 x 800 x 630 mm
used
Clamping drive, clamping force generator electric WMW EDU I80 M TGL 0-5471 Year: 1981 torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V motor: 0,,55 kW for more clamping drives see MMZ159, MMZ739 !; New ! Dimensions: 280 x 130 x 170 mm
used
Clamping drive, clamping force generator electric WMW EDU I80 TGL 0-5471 Year: 1982 torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V 0,55 kW for more clamping actuators see MMZ158, MMZ739 !; New ! Dimensions: 280 x 130 x 170 mm
used
Clamping drive, clamping force generator, electric, with reversing switch WMW EDU I80 F Speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMR 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 with direction switch ! used, tested ! Dimensions: 280 x 130 x 190 mm
used
Clamping table PAGUS Clamping area: 800 x 800 mm 8 grooves Groove width: 18 x 31 mm center groove: 28 x 9 mm bore: 32 mm 32 mm deep (not rotatable, counterpart missing) used, tested ! Dimensions: 800 x 800 x 220 mm
used
Hydraulic full tension cylinder SMW AUTOBLOK 125 SIN-S p: 70 bar n: 6000 rpm piston stroke: 40 mm piston rod diameter: Ø 50 mm New Dimensions: 310 x 170 x 170 mm
used
Hydraulic full tension cylinder RÖHM OVS 85 ( OVS85 ) p: 75 bar n: 8000 rpm piston stroke: 32 mm piston rod diameter: Ø 30 mm New ! Dimensions: 340 x 210 x 120 mm
used
Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 700 x 315 mm Working height: 120 mm Groove width: 14 / 25 mm an edge field broken out ! Dimensions: 700 x 315 x 120 mm
used
Clamping plate, clamping table, machine table PAGUS Working surface: 1000 x 290 mm Working height: 120 mm 1 x groove: 12 / 22 mm 4 x groove: 12 mm (no T-slot) New ! Dimensions: 1000 x 295 x 120 mm
used
Clamping plate, clamping table, machine table, press table PAGUS Working area: 420 x 410 mm Working height: 60 mm bore Ø: 167 mm groove width: 12 / 21 mm Dimensions: 420 x 410 x 60 mm
used
Universal clamping table, swivel, tilt and turntable PAGUS Clamping area: 700 x 240 mm 5 grooves groove width: 12 / 20 mm can be rotated horizontally to the right and left 40 degrees each 40 degrees tilt from/to the machine 30 degrees to the right and left swivel 40 degrees Dimensions: 800 x 300 x 250 mm
used
Clamping angle, angle table PAGUS Clamping surface: 650 x 400 mm groove width: T 18 / 32 mm and 30 x 30 mm (center groove) bore Ø 30 mm used, tested ! heavy version Dimensions: 650 x 400 x 410 mm
used
Universal clamping table, tilting and swivel table, height adjustable PAGUS clamping surface: 570 x 460 mm 3 grooves groove width: 14 / 24 mm swivel 45° used, tested ! Dimensions: 660 x 460 x 280 mm
used
Clamping angle, mounting aid, stop angle PAGUS 1 Clamping surface: 500 x 325 mm swivel 30° 120° 1 Working area: 500 x 345 mm (fixed) used, tested ! Dimensions: 560 x 430 x 560 mm
used
Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 204 x 192 mm Working height: 64 mm Groove width: 14 / 24 mm used, tested ! Dimensions: 240 x 205 x 64 mm
used
Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 140 x 128 mm Working height: 64 mm Groove width: 14 / 24 mm used, tested ! Dimensions: 140 x 128 x 64 mm
used
Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 512 x 268 mm Working height: 64 mm Groove width: 14 / 24 mm used, tested ! Dimensions: 610 x 268 x 70 mm
used
Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 332 x 320 mm Working height: 64 mm Groove width: 14 / 24 mm used, tested ! Dimensions: 332 x 320 x 70 mm