corner piece clamping used for sale

Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.

Key data: 1200 , 800

Clamping table in absoult as good as new condition! (Distort pictures, but table is straight!) The table comes from the area of a turbine assembly and is in top condition! Metrics: Width 1.200mm Depth 800mm Height 800mm Weight 700kg Number of T-slots 7 pieces T-slot table

length:250 mm width:200 mm height:400 mm Base plate dim:400 x 400 mm

length:1200 mm width:120 mm height:1260 mm

Technical description : 2 Units CLAMPING CUBES 400 x 500 x 800 mm length

diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg

table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg

weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm

length:1750 mm width:1200 mm height:2500 mm weight of the machine ca.:11 t

table length:1400 mm table width:1400 mm table height:740 mm weight of the machine ca.:1 t

Clamping plate with T-slots made of cast steel cast iron Length 1900 mm Width 1600 mm Thickness 475 mm Plate thickness approx. 130 mm Base area 1800 x 1890 mm- Clamping surface with scrubbed T-slot plate made of steel, thickness 70 mm- T-slots 22 mm, distance = 300 mm - Parallel to the bottom milled top = clamping surface - Milled bottom also the webs lie flat and carry - Very high load possible due to the strong ribbing and the load-bearing processing - Ideal as a press table, comes from a 200 ton press dead weight 4700 kg good condition; used

Univ., Milling machine table, Angle table, Clamping angle, Clamping table T-slot table, Attachment table for Univ. Tool Barrel Machine Table No.: 2230 05 001 300 00 Table size 700 x 460 mm Height 280 mm Slot width 14 mm Slot spacing 65 mm - Table top with 7x T-slot 14 mm mounting plate with 14 mm with slotted holes for mounting and 14 mm guide groove hole spacing Mounting plate Top = 670 mm, 50 mm top of the table surface (centrally measured) - Hole distance mounting plate center = 475 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate center = 2 pieces 15 mm, 100 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate bottom = 475 mm, 240 mm top of the table surface (centrally measured) Dimensions L x W x H 700 x 460 x 280 mm Weight 130 kg very good condition; used

Clamping plate with T-slots made of cast steel cast iron Base plate of radial drilling machine Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm - Top milled parallel to the bottom = clamping surface - Milled bottom also the webs lie flat on and carry- Ideal as base plate Net weight 1140 kg good condition; used

Clamping head VEB Vorrichtungsbau WeißENFELS Type G2 Direct dividing apparatus, partial head, dividing apparatus with collet holder Order No: 31202 Fixture No: TGL 30-07101 Collet holder 163E Height 140 mm Through hole 28 mm Clamping surface 265 x 165 mm - Index detent from 0 to 180 every 15 (12x)- Index detent from 180 to 360 every 45 (4x) - Collet set with 16 pieces Compression collets type 163E - 12 pieces Collets round 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 mm- 3 pieces Collet hexagon 8 / 10 / 14 mm- 1 piece collet square 12 mm- clamping surface with 20 mm guide groove Dimension dividing apparatus L x W x H 265 x 230 x 140 mm Weight: kg good condition; used

Clamping table, sinusoidal table, swivel table Swivel-clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Folding angle: 2 Folding angle: max. 7- folding angle 2 via threaded spindle folding angle max. 7 manually raised to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg good condition Ideal for making wedge strips; used

Mixers for dry and wet products On behalf of our customer, we can also offer you several baking carousels for the production of crêpes/pancakes of the manufacturer SDTN. If you are interested, we will be happy to send you photos and further information and, on request, the contact details of the seller. Net volume: 200 l Number of pumps: 2 pieces Pressure level: atmospheric Condition: functional, well-kept Availability: as of now Location: Belgium Price bids: are welcome Original price in 2017 (total): 30.000,00 €

Clamping cube with hole grid, 145 x 145 x 340mm height, base plate 300 x 300 x 30mm

2 pcs. Three-jaw chuck φ 230 with inner jaws 100,- each 1 pc Three-jaw lining φ 230 with outer jaws, Emco 100,- 1 pc Three-jaw lining φ 190, inner jaws and soft jaws Recording 6 DIN 55022 100,- 1 pc Three-jaw lining φ 315, inside and outside jaws, sgt . 360,- 1 pc Three-jaw chuck, Tos, φ 100, outer jaws, 5 Din 55022, 100,- 1 pc V-bar chuck Forkardt, KL160, φ. 160, without jaw H- 75mm, Holder: 6 DIN 55022 250,- Prices: ex works !

- space requirements length:600 mm - space requirements width:500 mm - total height:400 mm

Length: 1000 mm Width: 680 mm Height: 1510 mm Machine weight ca.: 0,2 t well-preserved clamping angle with various holes for clamping holes.

Length: 5000 mm Width: 2000 mm Height: 400 mm

Large cast iron clamping angle Ideal for clamping workpieces on a milling machine, a boring mill or other. The dimensions are approx. 90 x 70 x 73cm. Pick up Bremen or Siegen Loading is regulated.

width: 600 mm depth: 650 mm height: 1800 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 2000 mm height: 2000 mm depth: 1100 mm thickness of clamping plate: 65 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping cubes, drills Cube table for radial drilling machine Clamping surface top: L x W = 600 x 500 mm Clamping surface side: W x H = 600 x 300 mm Height: 515 mm T-slots: 22 mm T- T- slot spacing above: 150 mm T- Slot spacing laterally: 150 mm - 90 tiltable via rack with worm drive (swivelling) - Degree scale 0 to 90 Overall dimensions L x W x H: 600 x 500 x 515 mm Weight: 275 kg good condition; used

We have for sale heavy duty cubes for floor brores or big gantry machines.

table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 949 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions  ...

Cast iron clamping cube Length: 1290 mm Width: 920 mm Height: 510 mm T-slots dimensions: 42 x 25 mm 2 faces slotted Weight: approx 1 T

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G

Clamping angle WMW Clamping area: 200 x 194 x 44 mm Bridge width: 50 / 62 / 46 mm Groove width: 18 / 30 mm Groove depth: 30 mm Mounting area: 200 x 150 x 24 mm used, tested ! Dimensions: 200 x 150 x 194 mm

Clamping table, clamping plate, milling table, machine table WMW Clamping area: 425 x 165 mm Panel thickness: 60 mm Groove width: 12 / 20 mm groove depth: 20 mm web width: 19 / 45 / 45 / 19 mm guide groove: width: 12 mm, depth: 5 mm ( on top and bottom ) hole spacing ( fastening screws ): 365 x 60 mm 4x bore: Ø 14 / 20 mm used, tested ! Dimensions: 425 x 165 x 60 mm

Clamping table, clamping angle, milling table PAGUS Clamping area: 570 x 215 mm groove width: 14 / 23 mm / Groove depth: 24 mm Bridge width: 50 / 36 / 36 / 48 mm Mounting surface: 290 x 198 mm Groove width: 14 mm, Groove depth: 5 mm Bridge width: 84 / 37 / 47 mm Tilting: +/- 30 ° rotatable: 360 ° Height adjustment range: 135 mm coolant pan: 660 x 285 mm used, tested ! Dimensions: 660 x 445 x 280 mm

table length: 1000 mm table width: 500 mm height: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 6000 mm table width: 1000 mm height: 900 mm T-slot - width: 28 mm T-slot - distance: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 30° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 145 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 45° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 180 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 60° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 198 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 30° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm used, tested ! Dimensions: 310 x 200 x 145 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 45° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm 2x bore: Ø 14 mm hole spacing: 100 mm used, tested ! Dimensions: 310 x 200 x 180 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 60° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm 2x bore: Ø 14 mm hole spacing: 100 mm used, tested ! Dimensions: 310 x 200 x 198 mm

Clamping plate, grid plate PAGUS Clamping area: 400 x 280 x 32 mm 7 rows of 10 threaded holes each: M10 x 1.5, continuous 6 rows of 9 threaded holes each: M10 x 1.5, continuous 6 rows of 10 holes each: Ø 7, continuous 7 rows with 9 holes each: Ø 7, continuous grid dimension: 20 mm used, tested ! Dimensions: 400 x 280 x 32 mm

Clamping table, clamping plate, milling table, machine table CMB TD 35/250 Clamping surface: 500 x 400 mm < >Slot thickness: 40 mm Groove width: 12 / 18 mm Groove depth: 21 mm Bridge width: 98 / 178 / 98 mm Guide groove: Width: 50 mm, Depth: 18 mm ( bottom ) 5x slotted hole: Ø 12 x 60 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 500 x 400 x 40 mm

Clamping table, clamping plate, milling table, machine table CMB TD 35/250 Clamping area: 550 x 95 mm < br />Plate thickness: 50 mm Groove width: 20 / 31 mm Groove depth: 28 mm Bridge width: 30 / 45 mm Support surface (bottom): 550 x 97 mm hole spacing (mounting screws): 165 mm 4x bore with blind hole: Ø 10.5 / 17 mm, depth: 11 / 11 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 550 x 120 x 78 mm

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine -Width: 175 mm -Length: 165 mm -Height: 220 mm -Table: 175 x 165 mm -Groove width: 14 mm -Weight: 13 kg

Pressure watertight tie point, formwork accessories, KRASO tie point -monolithic connection of the vulcanized KRASO locking disc -easy installation -No assembly on site -easy closing of the clamping point -no time-consuming gluing of the plugs -no wage-intensive rework -absolutely watertight clamping point -Inside and OUTSIDE pressure water-tight tested -from company liquidation -Total length: 300 mm -1 mesh box approx. 350 pieces -Weight: including box 142 kg