corner piece clamping used for sale

Specifications: width 2000 mm height 1200 mm Depth of 850 mm

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

table length: 4000 mm table width: 2000 mm table height: 600 mm number of T-slots: number of T-slots: 6 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1300 mm height: 2500 mm depth: 1300 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic clamping plate Size: 450 x 150 mm new

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

Clamping plate Dimension 900 x 630 x 120 mm Nute 28 mm Angle of the grooves 30°

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 600 mm -Height approx. 270 mm -Plate thickness 20 mm -div. bores partially with thread -Gutters between top plate and base - weight jeweills approx. 100 kg

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

Length: 600 mm Width: 300 mm

Cast iron clamping cube - 5 sides Length 760 mm Height 455 mm Depth 610 mm T-slots numbers 5 T-slots T-slots dimensions 35 x 20 mm With a slight lack at the top side Weight approx 400 kg

2pcs 3250 x 1885 x 400 mm

6 pcs 6400 x 1885 x 400 mm

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Technical data Cutting surface at the top. 710 x 710 mm Clamping area 710 x 450 mm Swivel / Tiltable 0 - 90° mm Table height approx. 63 mm T-slot dimension (bottom / top) approx. 40 / 21.5 mm Weight approx. 560 kg Dimensions ( L x W x H ) 710 x 710 x 635 mm

Swivel cube table for radial drilling machines Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg

Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request

7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc

Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg

two cubes 1850x1200x700mm weight of one 1850kg one has some cracs on the ribs but can be welded Price for both pcs 5000eur

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

2pcs 3500 x 2000 x 350 mm

Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg

Electrical magnet size 1000 x 300m 110 volt supply IP 66

we have on stock these cubes for sale: 7 pcs 1000x750x400mm 12 pcs 1000x800x600mm 6 pcs 1250x1000x750mm

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

Clamping car Braun WES fully hydraulic with auxiliary trolley with tracks

Plate plate made of cast iron with longitudinal grooves and mounting holes, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12. - 4 plates with dimensions 3,000 mm x 1,200 mm x H 300 mm.

Clamping plate 5,000 mm x 2,000 mm x H 400 mm made of cast iron with 10 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

Clamping plate 5,000 mm x 1,980 mm x H 300 mm made of cast iron, with 6 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

Clamping bruecke outlet Plate 6.1, No.

spare parts - cook bolinders - top clamp Clamping shoe eneerone Plate 3.1B, No. 20

Clamping cylinder suitable for wedge tine press

electromagnetic round table 200 mm WMW

Technical data: - Table dimensions approx. 1700 x 1700 mm - Side length approx. 700 mm - Welded steel construction made of flat steel 100 x 30 mm - Table height approx. 850 mm - Table area approx. 2.3 sqm2 - various clamping tools - Weight approx. 1500 kg

Clamping cube clamping table Clamping angle Clamping tower machine table used Clamping surfaces: 3 times approx. 930 x 775 mm 1 time approx. 775 x 775 mm Long hole bore: approx. 70 x 30 mm Plate thickness approx. 30 to 40 mm Total dimensions: approx. 930 x 775 x 775 mm Weight approx. 770 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Clamping cube clamping table Clamping angle Clamping tower machine table used Clamping surfaces: 2 times approx. 825 x 600 mm 1 time approx. 825 x 455 mm 1 time approx. 600 x 455 mm Long hole bore: approx. 70 x 30 mm Plate thickness approx. 30 mm Dimensions total: approx. 825 x 455 x 600 mm Weight approx. 400 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

CNC lathe type 10"/ 250mm Recording A2-8" with soft top jaws, tails and bolts Max speed 2800 rpm Suit thread M60 ( Interchangeable )

Zero point clamping system Manufacturer: Vischer & Bolli VB tools Built: 2018 Condition: unused System consisting of: 1 piece Dock Lock steel closure plate Dimensions: 600x200x85/95 mm with 2 pieces DockLock SAFE20 built-in cylinder up to 12.5 KN per cylinder 10 Mounting holes for M16-Inbus 1 piece special base plate made of steel Dimensions: 800x250x76 mm 1 piece DEUX-MILL tensioner 1 piece special base plate made of aluminium Dimensions: 600x600x40 mm 5 pieces clamping bolt SAFE20 long with centering 10 pieces clamping bolt SAFE20 long without centering 5 pieces balancing clamping bolt SAFE20 long 1 piece hydraulic pump

Clamping angle with T-slots Size 1600x1250x1000 mm and 1250x1000x750 mm

Technical data: - Total - length approx. 2020 mm - Clamping surface length / groove length approx. 2000 mm - Width approx. 1000 mm - Plate thickness 180 / 300 mm - Plate thickness top plate 180 mm - 4 T - grooves - T - grooves distance 250 mm each - Groove width approx. 28 / 50 mm - Groove depth approx. 25 / 45 mm - various through holes - Weight approx. 2000 kg