128,203 used machines on RESALE, but how to find them? Machine Search
Corrosion protection rectirichtere REctimen Rectiveranel Manufacturer Martin, Velbert Type TG 50/50 Mains 220V 50HZ 15.6A Output 0-50V max 50A Transformer according to VDE 0550 with hardened insulation Type ETO Lstg. kVA 3.4 Prima220 V 15.6A Sekundaer 60V 56A Controller Preussler 22160/80.11 Display of the protective current 0-60A Special price
Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055
used
Cordmasspress built 1970 diverse thorns All data without information
- Single head machine - Direction : R – L - Different bottle sizes - In very good condition
Cordon bleu cutter -Manufacturer: DIL -Condition: used -Width: 400 mm -Transfer belt from the upper half of the meat
Corner round thruster Foellmer HE/F 31; good condition; cleaned and tested; Table equipment; Knife with radius 7mm. Corner rounding machine Foellmer HE/F31; good condition; cleaned and checked; table top machine; knife 7mm.
Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.
2930-12-334-9277 / 0052000675
For sale various grinding stones for corundum disc mill KORUMA
1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling
Product number: 1998B Townsend MasterFormer Type: TA1521 Serial number: 10080439 Year of construction: 2010 Stork MasterFill Type: MTFII Serial number: 0441010 Year of construction: 2010 Stork Master Slice Type: DRST Serial number: 0420410 Year of construction: 2010 Caliber: 50 mm Karl Schnell vacuumfiller Type: P10SE, 596P Serial number: 22045 Year of construction: 2010 Power: 3 x 400V, 50Hz, 10.9kW Weight: 1180 kg Risco vacuumfiller Type: RS303 Serial number: T310021 Year of construction: 2010 Power: 3 x 400V, 50Hz, 7.7kW Weight: 830 kg With RS70 grinding head
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...
used
6 denis prive grain silos, D 8 meters, 15 rings a.1.15 m, DIN 1055, catwalks, temperature measurement, Schmidt Seeger trough chain conveyor, elevator etc.
Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
used
Premix system stainless steel, 30 pieces stainless steel container 600 liters and 400 liters, dosing screws, galvanized steel construction, control cabinet etc.
Brief Technical Description of Corrugated Cardboard Production Equipment The SWL 250-2200 three-layer corrugated cardboard production line is a modern piece of equipment designed for industrial-scale production of corrugated cardboard. The line is suitable for manufacturing packaging, boxes, pallets, and other corrugated cardboard products widely used in logistics, trade, and manufacturing industries. Thanks to its high productivity and process automation, this equipment is a reliable and efficient solution for enterprises aiming to optimize corrugated cardboard production and increase their market competitiveness. GENERAL LINE PARAMETERS: • Manufacturer – Shanghai Liu Xiang General Equipments Co. Ltd (China) • Year of manufacture / commissioning – 2010 / 2011 • Operating speed – 180–220 m/min • Maximum paper roll width – 2200 mm • Minimum paper roll width ...
Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.
core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4
Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores
5kg = approx. 149 pcs welding electrode, rod electrode with reinnickel core rod unused, Manufacturer Thyssen Type Nickel A Original shrink-wrapped in foil, ovp in cardboard! The electrode melts slightly delayed by a pulsating arc, whereby a very good wetting of the base material is achieved. Particularly suitable for joint welding on grey cast iron (old cast iron) Dimensions, welding data, packaging units Diameter (mm) Length (mm) Welding current (A) Directional weight (kg/1000 pcs) Package contents (pieces) Package contents (kg) 2,5 350 50 - 100 21,0 238 5,0 3,25 350 70 - 130 33,5 149 5,0 4,00 350 90 - 150 49,5 101 5,0 Weight approx. 5kg Diameter 3.2mm
Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.
Horizontal Käde packaging machine
Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)
The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm
Corner transport table Left-Right Make MBO Model ET46 Year 1995 Width 460 mm Details corner roller table that can be flipped over to turn your products left or right, adjustable in height, new drive belt installed Available direct
Corner transfer pallet transport, overhauled 1400x1400 as well as other transport segments, turning segments, corner converters various manufacturers on request overhauled on request
Weiss SC 1000/+20IU Corrosion Climate Alternating Test Chamber White SC 1000/+20IU down to –20 °C Salt spray chamber More items - new and used - can be found in our shop! International shipping costs on request!
The scope of delivery includes: 01x Fluted steel panel, used Manufacturer: SSI Schaefer Material colour: sendzimir galvanized for frame depth: 850 mm Total length: approx. 850 mm Total width: approx. 150 mm Total height: approx. 11 mm Center-center hole: approx. 780 mm Material thickness: approx. 1.3 mm Weight | Pcs.: approx. 1,930 kg Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
used
Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204
Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Core cable: stranded wire 1 x 10 mm flexible, finely stranded -Length: 16 m -Dimensions roll: Ø 500 x 415 mm -Total weight: 16 kg
We offer: Used collision protection corners 10 pieces, approx. 400 mm 22 pieces, approx. 300 mm at the warehouse 21698 Harsefeld. Per piece € 17,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.
power cable -Telephone cable: 19553 -4-core -Roll dimensions: Ø 800/480 mm -Weight: 34 kg
Container corner fitting, container corner, container parts -Number: 18 corner fittings available -Price per piece - Die stamping: DL TR 08 1118 / DL BR 08 1124 -Height: 160mm -Dimensions individually: 178/120/H160 mm -Weight: 11kg/pcs
1x champagne cork orienter Cames / Kematec, used, type: P UNO E 94, built in 1994, capacity max. 5,000 corks/h, the machine ran flawlessly until the end, dimensions: D: 2.20 m, W: 1.35 m, H: 2.40 m, NP 17 ́ +, technical data see mail Kematec 22.11.19 Price: €6,900 plus VAT from stock Dolgesheim more offers..: vino-tec
Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg
diamond core drilling machine -Drill stand -vacuum pump -Core drill: Ø 202 mm (picture) -Machine dimensions: 500 x 370 x H1070 mm -Weight: 53 kg
Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm
maximum number of results exceeded
please refine your search
400 € 
