cor 32 kw used for sale

Double bench grinder METEOR 320 V, on base frame

Double bench grinder UVR 320 V, disc ø approx. 160 mm

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-110

Linear drive, linear gear, screw jack, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear slide -Type: 301500000460 335374/60 -Travel: 320 mm -Dimensions: see drawing with the pictures -Price: per piece -Number: 4 Stück -Dimensions: 490/95/H60 mm -Weight: 3 kg/piece

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor from a Scharmann table boring mill -Power: 3 - 11 kW -Speed: 220 - 3200 rpm -techn. Data: see photo nameplate -Shaft: Ø 45 x 104 mm -Construction: B3 -Dimensions: 1000/550 / H450 mm -Weight: 509 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg

Gear motor, electric motor, stop motor, drive motor, electric driven motor -comes from a Homag double-sided edge banding machine -Power: 0.18/3 kW -Speed: 64/77/320/384 rpm -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24 volt coupling -Dimensions: 620/350/H200 mm -Weight: 41 kg

Geared motor, electric motor, stop motor, drive motor, electric geared motor, three-phase motor -comes from a Homag double-sided edgebanding machine -Power: 0.18/3 kW -Speed: 7/320 rpm -Design: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24-volt coupling -Number: 2x geared motors available -Price: per piece -Dimensions: 650/320/H230 mm -Weight: 35 kg/piece

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: MLW, drying cabinet type WSU102 -Usable space: WHD 500x420x435 mm -Heating power: 2.16 kW -Nominal temperature: 320°C -Individual components: see photos -Dimensions: 630/1000/H840 mm -Weight: 118 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Grab hoist, multi-purpose hoist type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

YOU-JI Vertical Lathe Model YV-320 E Fanuc Control Maximum Turning Diameter: 450 mm Self-centering diameter: 200 - 250 mm (8\" - 10\") X-axis travel (horizontal): Approx. 200 - 250 mm Z-axis travel (vertical): approx. 400 - 450 mm Spindle speed: Up to 3,000 - 4,000 rpm Total Machine Weight: approx. 4,500 - 5,000 kg Ground Clearance (W x D): Approx. 1,600 x 2,400 mm Total Height: Approx. 2,600 mm Auction-ID: A7-44885-22

Machine: HOMAG Flat Saw CHF 325 38/35 Year: 2004 Max. cross-section: 3800x3800 mm Max. height: 60 mm Blade projection: 72 mm Ø main plank: 350x75 mm Ø scorer: 200x45 mm Engine power: 9.2 kW (12 hp) Scoring power: 1.1 kW (2.2 hp) Speeds: Carriage feed 0-60 m/min, return 60 m/min, programmed pusher 25 m/min Tables: 3 air cushion tables 1900x600 mm Gross Weight: 4200 kg Power supply: 380 V Compliance: EC Auction-ID: A1-45443-8

3 UNITS/SETS OF ATT0032 PACKED TOGETHER. A SINGLE ATT0032 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 320 mm, 1200 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 385 x 390 x 250 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0032 PACKED TOGETHER: 385 x 1170 x h250 mm - 144 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-231

3 UNITS/SETS OF ATT0032 PACKED TOGETHER. A SINGLE ATT0032 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 320 mm, 1200 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 385 x 390 x 250 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0032 PACKED TOGETHER: 385 x 1170 x h250 mm - 144 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-67

Features: DC motor controller, full-height rideability, variable speed, dual-rear wheel hydraulic drive, proportional control for travel and lift functions, 0.91 m extendable platform, low battery protection, solid rubber tires, Non-marking, attachment points for safety cords, forklift openings and attachment/lifting eyes, working height: 8.10 m, platform height (max): 6.10 m, platform height (retracted): 0.97 m, total width: 0.84 m, total Length: 2.32 m, Height (handrails up): 1.97 m, Platform width (interior): 0.71 m, Platform length (interior): 2.13 m, Extendable platform (deck): 0.91 m Auction-ID: A1-40133-277

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-44765-212

The Moditec 32S industrial shredder is a robust piece of equipment designed for the reduction and recycling of materials, especially plastics, in industrial environments. Recognized for the reliability of its solutions, the Moditec brand offers with this model a machine adapted to the needs of grinding in the workshop or on the production line. This shredder is offered as is, making it an attractive option for recommissioning projects or for users looking for a cost-effective solution. With compact dimensions of 65 cm in length, 55 cm in width and 77 cm in height, it fits easily into different workspaces. Its weight of 189 kg attests to its solid design and stability in operation, ensuring long-lasting use in industrial conditions. This shredder is therefore an effective solution for optimising the management and recovery of production waste. Auction-ID: A1-44765-303

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). 131/2750mm, 192/3050mm Auction-ID: A1-43751-41

Circulation coins Israel 32x 1 Agora, 22x 5 Agorot, 50x 10 Agorot, 6x 25 Agorot, 16x 1/2 Shekel, 17x 1 Shekel, total approx. 143 pieces

Pallet sealing film ALLVAC Allflex S 200 / 322 mm, length 350 m per roll, article number TZ-200-0322-ALS-00 Auction-ID: A7-45675-9

Clamping force: 430 Ton; toggle closure; column passage: 760x680 mm; screw: 60mm; control B&R Columbia; Nr. 2 pneumatic jacks and 2 hydraulic jacks; Nr. 1 air blow; Euromap 12. Serial: 364-112 Estimated weight: 19500 kg Approximate dimensions: 8200x1950xh2600 mm Auction-ID: A7-44996-26

Auction-ID: A7-45452-18

Equipped with: electric motor, emergency stop, power connection (380V) Auction-ID: A1-40134-321

Consisting of and including 19 Euro pallets with 21 outer boxes. 10 packages per outer box with 30 face masks per package total number of mouth cups 119700 Auction-ID: A1-41992-156

used ceiling crane of the company STEPA incl. rails according to photos ́s of the dismantled condition. Unfortunately, the wingspan was no longer measured, but it should be about 14.3m. Incl. radio remote control and operating instructions, as well as last crane inspection book available crane already dismantled and can be loaded by us onto a suitable truck (without lashing work) Auction-ID: A1-45733-5

Cart with detachable top box; top box with 8 drawers and top lid; Cart with 5 drawers and cupboard with double doors; 13drawers - 9 filled; 2 swivel wheels, 2 of which are braked; 7212 Auction-ID: A1-45773-225

Cart with detachable top box; top box with 8 drawers and top lid; Cart with 5 drawers and cupboard with double doors; 13drawers - 9 filled; 2 swivel wheels, 2 of which are braked; 7212 Auction-ID: A1-45773-224

Used SIDEL TOPBRAIN labeller machine 32000 BPHTechnical Specifications & Performance DataThis Sidel TopBrain is a mechanical cold-glue labeling machine engineered for high-speed beverage production and industrial packaging applications. Designed for glass bottle handling, it combines robust construction with precise label application for consistent results across demanding shifts on a used bottling line or a second hand production setup.Manufacturer: SidelModel: TopBrainYear of manufacture: 2009Machine type: Mechanical cold-glue labeling machine for glass bottlesMaximum speed: 32000 bottles/hourCurrent bottle format: 0.2LAdditional bottle format capability: 0.33LLabel type: Pre-cut paperGlue type: Cold glueNumber of plates: 45Machine pitch: 110 mmRotation direction: CounterclockwiseNumber of label magazines/stations: 2Dimensions (L x W x H): 4800 x 2900 x 2800 mmElectrical supply: 400 V, ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ybOQ9FFAPQM - Former Still full-service device - Battery: 18/11/2016 80V 700Ah, good performance measured at 82.3V - Duplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - StVZO lighting with turn signals for road approval - Comfort seat with lumbar support Auction-ID: A1-45450-180

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/gsOTbxx459Y - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 21/05/2012 48V/5PzS/625Ah, good performance measured at 49.1V - Duplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - Roof pane - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-45450-218

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3670

maximum cutting diameter: ø 250, arm lifting: Manual, arm lowering: Smooth feed (actuator), band dimensions: 2910 x 27 x 0.9 mm, band speed: 2 speeds (40 / 80 m/min), angled cutting: right 0° - 45° - 60°, vise: manual, quick-clamping (eccentric) Auction-ID: A7-45896-4

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https://youtu.be/l0uTt_vas10 - Former Linde full-service device - Battery: 14/2020, 24 3PZS 375Ah, very good performance measured at 25.2 V Auction-ID: A1-45450-343

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description.

Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

No.: 12690 Year of construction: 1987 top condition Head with jacket Hopper and discharge chute Power: 2.2 kW Off switch available Dimensions: LBM = 300x400x770mm Weight: approx. 45 kg

1 x 6 Naturkorker Bertolaso, type: Delta 506R, 1994, li-re, performance: approx. 8,000 bottles / h, format parts: 1.0 ltr.,. Price: 7.900,-plus VAT from stock Dolgesheim

<br>8-30 mm<br><br>Still in operation: Yes<br>Available: immediately

SACMI line for crown corks.

For sale crown corks press SACMI. Type PTC 170 produced 2006 year. Sheets 811,5 x 564,8 mm. Perfect condition.

Used crown corks press SACMI /Italy/ type PTC 027. Perfect working condition. 27 dies, 27 strokes. Produced in Italy.

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.

Corrosion protection rectirichtere REctimen Rectiveranel Manufacturer Martin, Velbert Type TG 50/50 Mains 220V 50HZ 15.6A Output 0-50V max 50A Transformer according to VDE 0550 with hardened insulation Type ETO Lstg. kVA 3.4 Prima220 V 15.6A Sekundaer 60V 56A Controller Preussler 22160/80.11 Display of the protective current 0-60A Special price

Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Corundum disks for Sale

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055