cor 32 kw used for sale

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 51 - 1000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information.

This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information.

This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information.

This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm.

This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine.

This FORST RTSA 32x1600x630 was manufactured in 2019. Consider the opportunity to buy this FORST RTSA 32x1600x630 sheet metal machine. Contact us for more information.

This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine.

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

This Celoria CD/FM 325 Lathe machine was manufactured in The Netherlands in 2003. It is equipped with a Siemmes control unit. It works with 12 axis. The machine includes BOSS 432 barfeeder, BERMEC-ITALIA chip conveyor and absolent AB extraction unit .

This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions.

Manufacturer: Arburg Model:720S 3200/1300 Year of Manufacture: 2010 Operating hours: 84854 Closing force: 320 t Screw diameter: 60 mm Max. injection volume: 664 cm3 Fixing plate: 1030 x 1030 mm Machine weight: 17.5 t Find more here - / Contact us at -

This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information.

This 3-axis Sodick Picka PF-32A was manufactured in 2010. Its an electron-beam processing machine designed for high-precision surface treatments. Features include a vacuum chamber, a max workpiece size of 300 × 200 × 100 mm, and a beam diameter of up to 60 mm. Ideal for applications requiring fine finishing. Contact us for more information.

This BOMAR STG 320 GM panel saw was manufactured in 2002. It features stepless mitre adjustments at 90°, 45°, and 30°, automatic shutoff after cutting, hydropneumatic descent control, and electrical belt tensioning. Equipped with a coolant pump and chip cleaning brush, it ensures efficient operation. Ideal for diverse cutting tasks, the BOMAR STG 320 GM machine we have for sale is a robust addition to any workshop. Contact us for further details regarding this panel saw.

This 4-axis HOLZHER Pro Master 7123-320K was manufactured in 2009. It features a large working area with X stroke of 3200 mm, Y stroke of 1445 mm, and Z stroke max of 325 mm. Equipped with six workpiece supports and automatic table setup in X and Y directions, it enhances productivity in complex woodworking tasks. If you are looking to get high-quality milling capabilities consider the HOLZHER Pro Master 7123-320K machine we have for sale. Contact us for more information.

Key data: 3200 mm, 972 , 65

Screw diameter: 65 mm Injection weight in polystyrene: 972 g Clamping force: 3200 kN Screw diameter: 65 mm Stroke volume: 1068 cm³ Injection weight in polystyrene: 972 g/hp Injection pressure: 2,120 bar Clamping force: 320 t Lights Tie bar spacing H x V: 680 x 680 mm Tool installation height - min.: 250 mm Opening distance: 640 mm Microprocessor control: ABF0100-KEBA2985, 15" Screen text: german Operating instructions: german FHK interface for robots: Euromap 67 Core pull: -- Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 78 kW Total weight: 14,000 kg Total size: 8.0 x 1.9 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125  ...

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

Key data: 3200 mm, 2 mm

Motorized guillotine shears, can be operated from the front with manual depth stop 750 mm, with digital display Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.5 mm Farbe/Colour weiß/blau Total power requirement: 32 A Machine weight: 2220 kg Dimensions: 3700 x 2500 x 1600 mm without cutting gap adjustment Connected voltage: 3 x 400 V/50 hz Connected load :5.0 kVA Projection: 750 mm Min. back gauge: 750 mm Machine number: 2300840

A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.

Vahterus PSHE 5SH-320/1/1 Plate Heat Exchanger Never been installed before!

Manufacturer: MAN Model: E2848 LER 322 Year of Commissioning: 2015 Power output: approx. 250 kW Find more here - / Contact us at -

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

BILLION HERCULES H2000 Series - 320 T Clamping force: 320 T - 3200 KN Injection unit: H 2000 Screw diameter: 75 mm Distance between columns: 610 x 610 mm Tray dimensions: 920 x 920 mm Min/max thickness of the mould: 330 - 680 mm Opening stroke: 660 mm Injected volume: 1259 cm3 Material pressure: 1587 bar Dimensions: 7.1x 2.1 x 2.6 m Weight: 14,000 kg

Metal band saw MEBA 320 DG semi-automatic hydraulic - Semi-automatic - Hydraulic operation - Infinitely adjustable band saw speed - Mitre cuts possible - Hydraulic clamping of the mitre adjustment - Hydraulically adjustable saw pressure - Fully hydraulic material clamping - Coolant device - Automatic shut-off - Emergency stop - Connection: 400 V - Cutting range: Round material: up to Ø 320 mm

General SKU319X542 MakeNetzsch LocationBarneveld TypeCS320/440-3A Main Features Motor15 KW Inlet diameter350 mm Width440 mm Specified Features - Granulator Granulatorcheck Rotor width400 mm Rotor diameter320 mm Number of rotor knives3/2 Number of stator knives:3/2 With hoppercheck Inlet450 x 350 mm Motor15 kW, 400/690 volt, 1465 rpm Rotor speed520 rpm Capacity150 kg/h With fancheck Motor2,2 kW, 3000 rpm With cyclonecheck Information No.7374 Year of construction2000 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace0,915x1,4 m Total height1,25 m Weight1200 kgGranulatorsNetzschMills > GranulatorsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

turning diameter: 180 mm turning length: 140 mm control: FANUC 21TB bar capacity: 30 mm spindle turning speed range: -6300 U/min Top turret tool hodler:: 8 Stationen weight of the machine ca.: 0.8 t dimensions of the machine ca.: 2.2 x 1.1 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

This KEYENCE Agilista-3200W was manufactured in 2016. It includes Modeling Studio software, printer setup materials, side covers, and an AC power cable. Ideal for those looking to enhance their 3D printing capabilities. Contact us for more information.

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

This 3-axis Brother TC-32B QT vertical machining center was manufactured in 2006. It offers precision and efficiency for various machining tasks. If you are looking to get high-quality milling capabilities, consider the Brother TC-32B QT machine we have for sale. Contact us for more information.

General SKU201S008 MakeNivoba (NL) TypeFS 250-32L LocationBarneveld CEcheck Main Features MaterialStainless steel Motor2.2 KW Surface32 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface32 m2 Drum sizesdia 2500x4050mm Motor2,2 kW 220-240/380-415 volt Drum speed0,3-3 rpm With stirrercheck Motor3 kW 230/415 volt With knife dischargecheck Mechanical operatedcheck Motor0,12 kW 220-240/380-45 volt With vacuum pumpSpeck Pumpen (3x) typeVH0800-41-30-009 (1x), ASK6501-13-60003 (2x) Motor30 kW 300/690 volt, 7,5 kW 400/690 volt With liquid pumpcheck Motor4 kW 400/690 volt MaterialStainless steel 1.4301 (304) Information No.1988-09135 Year of construction2007 With switchgear(as is) Floorspace5,7x3,5 M Total height3,1 M Weight12000 Kg Technical specs Extra information.Rotating vacuum filtersNivoba VeendamFilters > Rotating vac ...

General SKUR1083 MakeDynamic Air (USA) LocationBarneveld CEcheck TypeBella B320E-XN Main Features MaterialStainless steel Volume320 Ltr. Motor15 KW Specified Features - Paddle mixer MaterialStainless steel 1.4404 (316L) Paddle mixercheck Double shaftcheck Useful capacity320 ltr Trough sizes1325x1105x850mm With cover(2x) Inletdia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x) Outlet1200x160mm (2x) Glands air purgedcheck Motor15 kW 380-420/660-725 volt (2x) Speed mixing shaft112 rpm Information No.1096976 Year of construction2009 Floor space2,6x1,4 M Total height1,7 M Weight1000 KgPaddle mixersDynamic AirMixers > Paddle mixersBrand > Dynamic Air What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information.

This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us.

General SKU397M538 LocationBarneveld MakeHeinrich Nowak Apparate- u. Behalterbau No.7894 Pressure Working pressure1 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume325 Ltr. Specified Features - Stirring vessel Open stirring vesselcheck Capacity325 ltr Vessel sizesdia. 0,6x1,2 M Dished bottomcheck Flat top sidecheck With covercheck Manholedia. 350mm OutletDN65 With jacket2x DN40 Max. temperature50 gr.C. With homogenisercheck Motorcheck MaterialStainless steel Information Year of construction1986 Mounted on legscheck Floorspace1,2x1,0 M Total height2,5 M Weight500 KGStirring vesselsHeinrich NowakStirring vessels > Stirring vesselsBrand > Heinrich Nowak What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to i ...

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg

This 4-axis STAMA MC 326 vertical machining centre was manufactured in 2011. It features a travel of 700 mm in the X-axis, 400 mm in the Y-axis, and 360 mm in the Z-axis. The machine is equipped with a spindle power of 18.5 kW and a tool magazine capacity of 48 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 326 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2021. This Engel Victory 320/80 spex features a clamping force of 800 kN and an opening stroke of 450 mm. The machine has a maximum daylight of 750 mm and a mould height minimum of 300 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 320/80 spex machine we have for sale. Contact us for further details.

RS 329 323 relay, Previously installed on: COURTOY R100

General SKU227T230 MakeDinnissn Type322-365-645 No.090007 Year of construction2009 LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Length750 mm Specified Features - Rotating sieve MotorVector Speed470 rpm MaterialStainless steel Information Floor space2000x750 mm Total height700 mm Weight450 kgRotating sievesDinnissenSieves > Rotating sievesBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydra ...

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

Key data: 500 kN

Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...

Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Di ...

Arburg 320C 500-250 Year of Make: 2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request