cor 32 kw used for sale

pressure: 320 t chamfer lenght: 4100 mm stroke: 350 mm total power requirement: 32 kW weight of the machine ca.: 23.500 kg dimensions of the machine ca.: 4300x2600x3400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

EBO 68 - 320 IS 600 Electrical deck Oven with 4 decks and proofer Dimensions: 4 x 60x80cm For 2 plates 60x40cm The Oven is complete stainless steel Easy to clean Power of 1 deck: 4.85kW Voltage: 400V / 50Hz / 3/N/PE

Manufacturer: Hermann Schwammberger Model: DLMEh 450 / 50 / 3250 Year of Manufacture : 2017 Type of Machine : Hardening furnace strip line Heating Power: 96 kW Total Current: 136 A Rated Temperature: 1,120 °C Certification: CE Find more here - / Contact us at -

Manufacturer: MAN Model: TGA 28.320 6x2-4BL Year of Manufacture: 2007 Engine Power: 235 kW (320 HP) Fuel Type: Diesel Engine Capacity: 10,518 cm³ Axle Configuration: 6x2-4 Permissible Total Weight: 27,000 kg Permissible Axle Loads: - Axle 1: 8,000 kg - Axle 2: 8,000 kg - Axle 3: 11,000 kg Unladen Weight: 19,000 kg Gross Vehicle Weight Range: 27,000–26,000 kg Wheelbase: 3,500–3,050 mm Tire Sizes: - Front: 315/80 R22.5 - Rear: 385/65 R22.5 Body Type / Equipment: FAUN Powerpress 524 Special Features: - Müllwagen (Refuse Compactor Truck) - Equipped with FAUN Powerpress body system - Red reflectors on foldable components as per StVZO exemption - Noise class: EG Lärmarmer (low-noise vehicle) Find more here - / Contact us at -

General SKU279W436 LocationBarneveld MakeDinnissen Type322-365-650 No.120282 Year of construction2012 Main Features MaterialStainless steel Motor3 KW Length365 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesDia. 200x365 mm Screw sizesDia. 150 mm Inlet240x250 mm Outlet2x 150 mm With inspection hatchcheck Motor3,0 kW, 400 V, 1415 rpm Speed700 rpm Air purged glandscheck With sieve cagecheck Sieve perforation5x5 mm MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height1,50 m Weight360 kg CEcheck Floor space1,72x0,63 m Extra SpecificationsWith level switch and butterfly valve for outlet.Rotating sievesDinnissenSieves > Rotating sievesBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...

General SKU340U844 LocationBarneveld MakeBerstorff / Brabender Typedoppelschneckenextruder DSE 25 Year of construction1994 Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingcheck weinreich- industriekühlung, 12kW, 1994 DC-motorcheck 6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 Information With switchgearcheck(as is) Floorspace2,6x0,9m CEcheck Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum me ...

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain X-axis travel 300 mm Y-axis travel 200 mm Travel Z-axis 200 mm Table length 600 mm Table width 300 mm Dimensions (L x W x H) 1430 x 1400 x 1970 mm Operating manuals available available now The price is net, unpackaged and freely loaded ex site. without warranty

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 105.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 146 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-03z-4w086 0-used/22385, , = More information =, , Type: Engine, Type number: 03Z-4W0860; Transport weight [kg]: 1000

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 116.3 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-01z-1w590 0-used/720, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 01Z-1W5900; Transport weight [kg]: 1050

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 102 - 2000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m Compact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MÜLLER MARTINI 321 Saddle Stitching Line Year: 1992 Configuration: 5 × Feeders 1 × Stitching Unit (Muller Martini 321 Saddle Stitcher) 1 × Three-Knife Trimmer 1 × Stacker 2 × Compressors Including manuals Condition: In good working condition, available directly from our warehouse in 67269 Grünstadt, Germany. A reliable and well-maintained line, ideal for efficient saddle stitching and trimming operations. Ready for inspection and immediate use.

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 175.2 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 3045 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 280 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-01z-2w132 0-used/42314, , = More information =, , Type: Engine, Type of fuel: Diesel, Emp ...

- Brand: Mayper - Model: MAPC 3280 - Cutting chamber: 830 x 320 mm - Open rotor - Slanted cut - Engine: 40 hp (30 kw) - 3 HP (2.2 kw) vacuum cleaner -Electric motor

CNC controller: BROTHER Axes X-axis travel mm: 450 Y-axis travel mm: 320 Z-axis travel mm: 410 Worktable Table dimensions mm: 550x350 Spindle Spindle speed rpm: 12000 Tool system Tool holder: BT-30 Tool magazine slots: 26

Manufacturer: Gildemeister Model: NEF 320 Type of Machine : Lathe Voltage: 400 V (primary), 230 V (secondary) Power: 14 kVA Machine is fully functional Find more here - / Contact us at -

A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.

DETAILED EQUIPMENT LIST (FULL PACKAGE) (A) Earthmoving, Excavation & Grading • 6 × Wheel Loaders LW500KN • 4 × Excavators CAT 326DL • 6 × Excavators CAT 323DL • 6 × Bulldozers ZD220-3 • 7 × Graders CAT 140K • 1 × Grader G9190 (B) Asphalt Production Line (Primary Plant Package) Asphalt Mixing Plant DQ4000 (Main Unit) – includes: • Bitumen pumps & pipelines • Fuel storage tanks & burners (diesel & heavy oil compatible) • Aggregate storage bins / cold feeders • Drying drum with burner • Bag-house dust collection system • Hot elevator & screening systems • Hot bins • Mixing tower with pug-mill • Control cabin (computerized) • Weighing systems • Bitumen emulsion plant (optional) • Filler silos & feeding system • Asphalt storage silos with discharge system • Spare parts package (critical wear items) • Road pavers & comp ...

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Find more here - / Contact us at -

cutting diameter: 300 mm saw band length: 3660 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: round: 290 mm capacity 45 degrees: flat: 260 x 280 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 180 x 170 mm coolant capacity: ca. 100 l Control: SPS total power requirement: 2.4 kW AC weight: 904 kg range L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in  ...

Dimensions (L/W/H): 6800x3350x1500 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 3200 mm Cutting height: 1600 mm Motor output: 1,3 kW Dimensions (L/W/H): 4000x1500x2000 mm machine weight ab.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mm throat: mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jenbacher 320 refurbished cylinder heads are available. 18 pcs - Quantity For pricing and information, contact us today to get a quote.

A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement.

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg ARB 325 B SN 51221 Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 51221 The number of the Spurs: - Type: ARB 325 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061423

Cooling/Freezing chamber ILKAZELL -External dimensions: 3450 x 3200 x 2450 mm -Internal dimensions: 3250 x 3000 x 2250 mm -Plate thickness: 100 mm -Door clearance: 1000 mm -Stainless steel floor -Cooling/Freezing unit in set -Stock status: 1 -The chamber is easy to assemble

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...

Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible.

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x16 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,6 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 ...

General SKU335X737 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Type327 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume327 Ltr. Motor0.25 KW Pressure4 Bar Specified Features - Stainless Steel Reactor Reactorcheck CapacityPooling tank Vessel sizesø 750 x 981 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck DN40 (with valve) With jacketcheck (35 L) Max. temperature0 / 170 °C With propellor stirrercheck (magnetic) Motor0,25 kW 230/400 V 2713 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Capacity327 l. Vessel sizesDia. 750x981 mm Dished topcheck Dished bottomcheck With covercheck DN700 Top connectionscheck OutletDN40 with valve Max. temperature0°C/+150 ...

A semi-automatic horizontal bandsaw Knuth is available. Miter range: 0°-60°, min. cutting range: 25mm, max. cutting diameter: 325mm, max. cutting diameter X/Y: 400mm/315mm, saw band speed: 100m/min, saw band dimensions X/Y/Z: 4380mm/34mm/1.1mm. Machine dimensions X/Y/Z: approx. 2150mm/2150mm/1650mm, weight: approx. 1800kg. An on-site inspection is possible.

Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton

Holzprofi panel saw KS400 incl. scoring unit, smooth running format sliding table with large outrigger table, saw blade tiltable, fine adjustable parallel rip fence incl. mitre fence and eccentric clamps. Very stable guidance of the format table for precise working even with heavy work pieces. With own motor for the scoring unit for an easy deactivation. Technical data: Main motor outputS1 5,5 kW Scoring motor output S1 0,75 kW Voltage 400 V Saw blade tilting 0-45° Format table size 3200 x 375 mm Blade dimensions 400 mm Cutting depth 130 mm Scoring saw blade 120/20 mm Speed saw blade 3000/4000/5000 RPM Speed scoring saw blade 8000 RPM Cutting width 1250 mm Weight 1000 kg

Key data: 1000 , 400

Available complete power plant of Jenbacher 320 with 72000 hours. Engine is from year 1998. At 42000 hours it was performed an overall, after that the schedule of maintence has been followed. It stopped runninf at full load (1MW) without problems. All the auxiliaries are available except transformer and switch braker. Full boroscope and inspection of bearing beans, cranksaft and turbo is available. Brand: Jenbacher Model: J320 GS B05 Power: 1000kW Year: 1998 Hours: 72000 Voltage: 400V

WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,649 h Condition: Fully functional very neat overall condition Ready to use No known defects The facility is ideal for: industrial high-pressure cle ...

Belt loader, coolant filter, wheel changing equipment, grinding and drag rules and grub screws, Grinding wheel dimensions (od x id x width): 610 x 355 x 304,8 mm, Ø min / max to grind: 2/150 mm, Regulating wheel speed nº: infinite, Min/max speed of regulating wheel (r.p.m.): 10/225 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi TD, Dive (auto/manual): Automatic , Dimensions of the regulating wheel (OD x ID x W): Ø350 x Ø203,2 x 355 mm, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 177.5 mm, Maximum infeed grinding length: 355 mm, Motor power cooling: 0,70 Kw, Coolant system motor power: 0,70 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Voltage: 220/380Kw, Long: 1.165 mm, Width: 3.398 mm, High: 1.700 mm, W ...

Complete plant Jenbacher JMC 320 GS-L biogas installations available. 2 Jenbacher units in 40 ft containers, power: 2 × 1,550 kVA. Year: 2009. Control panels: DIA.NE. XT and DIA.NE. XT4. 60,000 operating hours after overhaul. Full maintenance carried out by Jenbacher. If you'd like, I can also format this as a more commercial offer description. Loaded Now Departure France

compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage Pgebmsyfpbtsrc H Dlsg 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660