cor 32 kw used for sale

Control unit ZF 3217.208.007

PROMAC Combination Belt Sander 322BE1 Motor 0.7 kW, 400 Volt Grinding wheel 200 x 25 x 20 mm Speed 2850 rpm Buffing disc Abrasive belt 100 x 1000 mm Belt speed 16 m/sec. Grinding surface 105 x 250 mm Dimensions 500 x 280 x 630 mm Weight approx. 28 kg

Used High Quality Bystronic pressbrake 6-axis for a sale.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Gear Motor -Max. Speed: 3000 rpm -Transmission gear i: 288.89 -Hollow shaft: Ø 25 mm -Number: 1x motors available -Price: per piece -Dimensions: 385/130/H155 mm -Weight: 13 kg

One used Müller Martini Inventa Plus 3212 Year of man. 2001 Max. Size : 320 x 385 mm Min. Size : 80 x 120 mm Mechanical Speed : 20-200 Cycles/Min

cutting diameter: 320 mm saw band length: 4570 x 27 x 0,9 mm table height: mm cutting width: 450 x 280 mm power capacity: 4,0 kW cutting speed: 15 - 105 m/min engine: 380 V total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Curved plate chain with attachable gripper material LFG and NFG as good as new, partly in original packaging Number and lengths see pictures Price per m

Air/water heat exchanger for enclosure cooling SK 3210100, Rittal, used Top The cooler has 2 water connections for the cooling medium water. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good condition. It looks as if it has never been used. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warr ...

Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

PLC control -Type: Simatic S7 6ES7 321-1BL00-OAAO -Number: 39 x available -Price: per piece -Weight: 0.4 kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

PLC control -Type: Simatic S7-300 -Digital output: SM 322, -Potential green, 32DA, DC24V, 0.5A, -1 X 40 PIN., -Total current: 4A/group -Number: 13x available -Price: per piece -Weight: 0.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 25 mm -Stroke: 320 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 51/64/H530 mm -Weight: 4.75 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: SMC -Type: C91SD80-320 -Piston: Ø 80 mm -Stroke: 320 mm -Pressure: max. 10 bar -Number: 2x available -Price: per piece -Dimensions: 101/101/H585 mm -Weight: 8.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: Gewefa -Type: 05.006.003/3-32Ø -Weight: 3.4 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor -Body: made of stainless steel -Speed: 30 m/min -Motor power: 0.37 kW/59 rpm -Belt width: 390 mm -Length: 2050 mm -with driver: 325 x 150 mm -Transport dimensions: 2100/800/H570 mm -Weight: 160 kg

Socket distributors, site power distributors, connection cabinet -Equipment -Circuit breaker -Main fuse -1x socket: 16 A -1x socket: 32 A -Schuko: 3 -Dimensions: 270/280/H340 mm -Weight: 8 kg

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

V-belt pulley, belt pulley -Diameter: 322 mm -Total width: 185 mm -Straps: 8 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Number: 2x pulleys available -Price: per piece -Weight: 38 kg -other pulleys in stock

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 97 g - Injection volume: 106 cm? - Clamping force: 500 kN - Daylight between platens max: 550 mm - Platen size (h x v): 446 x 446 mm - Distance between tie-bars (h x v): 320 x 320 mm - Power: installed max: 21,5 kW - Dimensions (long x wide x high): 3.410 x 1.475 x 1.990 mm - Weight: 2.330 kg

Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg

Line choke, air gap choke -Type: 3005a/32532 -Price: per piece -Number: 5x available -Weight: 2.2 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg

Control panel, operator panel, machine control, monitor -Manufacturer: SIEMENS, Sinumerik Monitor 12 -Type: MAM 3212 -Dimensions: 340/310 / H260 mm -Weight: 9.1 kg

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input ovp -Type: 6ES7 321-1HB02-OAAO -Number: 2x module available -Price per piece -Cardboard dimensions: 150/130/H45 mm -Weight: 0.2 kg/pc

PLC control, digital output, digital output -Manufacturer: Siemens, Simatic S7 digital output -Type: 6ES7 322-1BH01-OAAO -Number: 6x module available -Price per piece -Dimensions: 115/40/H125 mm -Weight: 0.2 kg/pc

PLC control, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BL00-OAAO -Number: 2 modules available -Price: per piece -Cardboard dimensions: 115/40/H125 mm -Weight: 0.4 kg/pc

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BH10-OAAO -Number: 1x module available -Price per piece -Cardboard dimensions: 115/40/H125 mm -Weight: 0.2 kg/pc

PLC control, digital input, digital module -Manufacturer: Siemens, Simatic S7-300 digital module SM 323 -Type: 6ES7 323-1BH01-OAAO -Quantity: 1 module available -Cardboard dimensions: 115/40/H125 mm -Weight: 0.3 kg

Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

PLC control, digital output, digital output -Manufacturer: Siemens, Simatic S7 digital output -Type: 6ES7 322-1HH01-OAAO -Number: 1x module available -Price per piece -Dimensions: 115/40/H125 mm -Weight: 0.3 kg/pc

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 012 H750 -Voltage: 24V/335Hz -Dimensions: 115/90/H60 mm -Weight: 0.3 kg

Registerstanze - Index Cutter Hunkeler RE 320 Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 003 H750 -Voltage: 24V/335Hz -Dimensions: 120/90/H75 mm -Weight: 0.3 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Steel, lever shears, sheet metal shears with stable base -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 322 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 95 mm -Quantity: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 605 mm -Shaft: Mountings Ø40 x 110 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 795 mm -Weight: 68 kg

PLC control, digital output, digital output -Manufacturer: Siemens, Simatic S7 digital output -Type: 6ES7 322-1BL00-0AA0 S C-X3V78356 E-Stand:7 -Number: 1x module available -Price per piece -Dimensions: 130/55/H125 mm -Weight: 0.4 kg/pc

V-belt pulley, belt pulley -V-belt pulley: Pulley 14 grooves -V-belt width: 22 mm -Intake: Ø110 x 250 mm -Dimension: Ø325 x 365 mm -Weight: 88 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 9 grooves -V-belt width: 22 mm -Intake: Ø100 x 210 mm -Dimension: Ø325 x 240 mm -Weight: 62 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BH01-0AA0 S C-4B63318 E-Status:3 -Number: 3x module available -Price: per piece -Dimensions: 115/40/H130 mm -Weight: 0.3 kg/piece

Automatische Fadenheftmaschine - Automatic Sewing machine Müller Martini 3210 Year 1910 Feeder Type 3663 with magazine Size signature min. 140x100mm - max. 360x310mm Speed mech. max. 9000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 600 mm -Shaft: Mounts Ø50 x 95 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 790 mm -Weight: 70 kg